diff mbox series

[net-next,v1,3/9] net: dsa: qca: ar9331: reorder MDIO write sequence

Message ID 20210403114848.30528-4-o.rempel@pengutronix.de
State New
Headers show
Series [net-next,v1,1/9] net: dsa: add rcv_post call back | expand

Commit Message

Oleksij Rempel April 3, 2021, 11:48 a.m. UTC
In case of this switch we work with 32bit registers on top of 16bit
bus. Some registers (for example access to forwarding database) have
trigger bit on the first 16bit half of request and the result +
configuration of request in the second half. Without this this patch, we would
trigger database operation and overwrite result in one run.

To make it work properly, we should do the second part of transfer
before the first one is done.

So far, this rule seems to work for all registers on this switch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/qca/ar9331.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Andrew Lunn April 3, 2021, 2:55 p.m. UTC | #1
Hi Oleksij

Maybe add a short comment about why the order is important.

> -	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
> +	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
> +				  val >> 16);
>  	if (ret < 0)
>  		goto error;
>  
> -	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
> -				  val >> 16);
> +	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
>  	if (ret < 0)
>  		goto error;
>  
>  	return 0;
> +
>  error:
>  	dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
>  	return ret;

With that:

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew





> -- 
> 2.29.2
>
Florian Fainelli April 4, 2021, 2:17 a.m. UTC | #2
On 4/3/2021 04:48, Oleksij Rempel wrote:
> In case of this switch we work with 32bit registers on top of 16bit

> bus. Some registers (for example access to forwarding database) have

> trigger bit on the first 16bit half of request and the result +

> configuration of request in the second half. Without this this patch, we would

> trigger database operation and overwrite result in one run.

> 

> To make it work properly, we should do the second part of transfer

> before the first one is done.

> 

> So far, this rule seems to work for all registers on this switch.

> 

> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>


Seems like you could send this as a separate bugfix for the "net" tree 
along with a Fixes tag?
-- 
Florian
diff mbox series

Patch

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index ca2ad77b71f1..9a5035b2f0ff 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -837,16 +837,17 @@  static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
 		return 0;
 	}
 
-	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
+	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
+				  val >> 16);
 	if (ret < 0)
 		goto error;
 
-	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
-				  val >> 16);
+	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
 	if (ret < 0)
 		goto error;
 
 	return 0;
+
 error:
 	dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
 	return ret;