diff mbox series

[net-next,1/2] net: r6040: Use logical or for MDIO operations

Message ID 20210523155411.11185-2-f.fainelli@gmail.com
State New
Headers show
Series net: r6040: Non-functional changes | expand

Commit Message

Florian Fainelli May 23, 2021, 3:54 p.m. UTC 
This is not a functional change, but we should be using a logical or to
assign the bits we will be writing to the MDIO read and write registers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/rdc/r6040.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 7c74318620b1..aff68e2cb700 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -200,7 +200,7 @@  static int r6040_phy_read(void __iomem *ioaddr, int phy_addr, int reg)
 	int limit = MAC_DEF_TIMEOUT;
 	u16 cmd;
 
-	iowrite16(MDIO_READ + reg + (phy_addr << 8), ioaddr + MMDIO);
+	iowrite16(MDIO_READ | reg | (phy_addr << 8), ioaddr + MMDIO);
 	/* Wait for the read bit to be cleared */
 	while (limit--) {
 		cmd = ioread16(ioaddr + MMDIO);
@@ -224,7 +224,7 @@  static int r6040_phy_write(void __iomem *ioaddr,
 
 	iowrite16(val, ioaddr + MMWD);
 	/* Write the command to the MDIO bus */
-	iowrite16(MDIO_WRITE + reg + (phy_addr << 8), ioaddr + MMDIO);
+	iowrite16(MDIO_WRITE | reg | (phy_addr << 8), ioaddr + MMDIO);
 	/* Wait for the write bit to be cleared */
 	while (limit--) {
 		cmd = ioread16(ioaddr + MMDIO);