@@ -1128,6 +1128,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
{
struct qca8k_priv *priv = ds->priv;
u32 reg, val;
+ int ret;
switch (port) {
case 0: /* 1st CPU port */
@@ -1198,7 +1199,9 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
/* Enable/disable SerDes auto-negotiation as necessary */
- qca8k_read(priv, QCA8K_REG_PWS, &val);
+ ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return;
if (phylink_autoneg_inband(mode))
val &= ~QCA8K_PWS_SERDES_AEN_DIS;
else
@@ -1206,7 +1209,9 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
qca8k_write(priv, QCA8K_REG_PWS, val);
/* Configure the SGMII parameters */
- qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return;
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
Now we can check qca8k_read() return value correctly, so if it fails, we need return directly. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/net/dsa/qca8k.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)