@@ -8,4 +8,5 @@ mscc_felix-objs := \
mscc_seville-objs := \
felix.o \
+ felix_mdio.o \
seville_vsc9953.o
new file mode 100644
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Distributed Switch Architecture VSC9953 driver
+ * Copyright (C) 2020, Maxim Kochetkov <fido_max@inbox.ru>
+ */
+#include <linux/types.h>
+#include <soc/mscc/ocelot.h>
+#include <linux/dsa/ocelot.h>
+#include <linux/iopoll.h>
+#include "felix.h"
+
+#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
+#define MSCC_MIIM_CMD_OPR_READ BIT(2)
+#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
+#define MSCC_MIIM_CMD_REGAD_SHIFT 20
+#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
+#define MSCC_MIIM_CMD_VLD BIT(31)
+
+#define FELIX_MDIO_MII_TIMEOUT 10000
+#define FELIX_MDIO_MII_RETRY 10
+
+static int felix_gcb_miim_pending_status(struct ocelot *ocelot)
+{
+ int val;
+
+ ocelot_field_read(ocelot, GCB_MIIM_MII_STATUS_PENDING, &val);
+
+ return val;
+}
+
+static int felix_gcb_miim_busy_status(struct ocelot *ocelot)
+{
+ int val;
+
+ ocelot_field_read(ocelot, GCB_MIIM_MII_STATUS_BUSY, &val);
+
+ return val;
+}
+
+static int felix_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+ u16 value)
+{
+ struct ocelot *ocelot = bus->priv;
+ int err, cmd, val;
+
+ /* Wait while MIIM controller becomes idle */
+ err = readx_poll_timeout(felix_gcb_miim_pending_status, ocelot, val,
+ !val, FELIX_MDIO_MII_RETRY,
+ FELIX_MDIO_MII_TIMEOUT);
+ if (err) {
+ dev_err(ocelot->dev, "MDIO write: pending timeout\n");
+ goto out;
+ }
+
+ cmd = MSCC_MIIM_CMD_VLD | (phy_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
+ (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
+ MSCC_MIIM_CMD_OPR_WRITE;
+
+ ocelot_write(ocelot, cmd, GCB_MIIM_MII_CMD);
+
+out:
+ return err;
+}
+
+static int felix_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct ocelot *ocelot = bus->priv;
+ int err, cmd, val;
+
+ /* Wait until MIIM controller becomes idle */
+ err = readx_poll_timeout(felix_gcb_miim_pending_status, ocelot, val,
+ !val, FELIX_MDIO_MII_RETRY,
+ FELIX_MDIO_MII_TIMEOUT);
+ if (err) {
+ dev_err(ocelot->dev, "MDIO read: pending timeout\n");
+ goto out;
+ }
+
+ /* Write the MIIM COMMAND register */
+ cmd = MSCC_MIIM_CMD_VLD | (phy_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ;
+
+ ocelot_write(ocelot, cmd, GCB_MIIM_MII_CMD);
+
+ /* Wait while read operation via the MIIM controller is in progress */
+ err = readx_poll_timeout(felix_gcb_miim_busy_status, ocelot, val, !val,
+ FELIX_MDIO_MII_RETRY, FELIX_MDIO_MII_TIMEOUT);
+ if (err) {
+ dev_err(ocelot->dev, "MDIO read: busy timeout\n");
+ goto out;
+ }
+
+ val = ocelot_read(ocelot, GCB_MIIM_MII_DATA);
+
+ err = val & 0xFFFF;
+out:
+ return err;
+}
+
+int felix_mdio_register(struct ocelot *ocelot)
+{
+ struct felix *felix = ocelot_to_felix(ocelot);
+ struct device *dev = ocelot->dev;
+ int rc;
+
+ /* Needed in order to initialize the bus mutex lock */
+ rc = mdiobus_register(felix->imdio);
+ if (rc < 0) {
+ dev_err(dev, "failed to register MDIO bus\n");
+ felix->imdio = NULL;
+ }
+
+ return rc;
+}
+
+int felix_mdio_bus_alloc(struct ocelot *ocelot)
+{
+ struct felix *felix = ocelot_to_felix(ocelot);
+ struct device *dev = ocelot->dev;
+ struct mii_bus *bus;
+
+ bus = devm_mdiobus_alloc(dev);
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "Felix internal MDIO bus";
+ bus->read = felix_mdio_read;
+ bus->write = felix_mdio_write;
+ bus->parent = dev;
+ bus->priv = ocelot;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
+
+ felix->imdio = bus;
+
+ return 0;
+}
+
+void felix_mdio_bus_free(struct ocelot *ocelot)
+{
+ struct felix *felix = ocelot_to_felix(ocelot);
+
+ if (felix->imdio)
+ mdiobus_unregister(felix->imdio);
+}
+
new file mode 100644
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Distributed Switch Architecture VSC9953 driver
+ * Copyright (C) 2020, Maxim Kochetkov <fido_max@inbox.ru>
+ */
+#include <linux/types.h>
+#include <soc/mscc/ocelot.h>
+
+int felix_mdio_bus_alloc(struct ocelot *ocelot);
+int felix_mdio_register(struct ocelot *ocelot);
+void felix_mdio_bus_free(struct ocelot *ocelot);
+
@@ -11,13 +11,7 @@
#include <linux/dsa/ocelot.h>
#include <linux/iopoll.h>
#include "felix.h"
-
-#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
-#define MSCC_MIIM_CMD_OPR_READ BIT(2)
-#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
-#define MSCC_MIIM_CMD_REGAD_SHIFT 20
-#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
-#define MSCC_MIIM_CMD_VLD BIT(31)
+#include "felix_mdio.h"
static const u32 vsc9953_ana_regmap[] = {
REG(ANA_ADVLEARN, 0x00b500),
@@ -857,7 +851,6 @@ static struct vcap_props vsc9953_vcap_props[] = {
#define VSC9953_INIT_TIMEOUT 50000
#define VSC9953_GCB_RST_SLEEP 100
#define VSC9953_SYS_RAMINIT_SLEEP 80
-#define VCS9953_MII_TIMEOUT 10000
static int vsc9953_gcb_soft_rst_status(struct ocelot *ocelot)
{
@@ -877,82 +870,6 @@ static int vsc9953_sys_ram_init_status(struct ocelot *ocelot)
return val;
}
-static int vsc9953_gcb_miim_pending_status(struct ocelot *ocelot)
-{
- int val;
-
- ocelot_field_read(ocelot, GCB_MIIM_MII_STATUS_PENDING, &val);
-
- return val;
-}
-
-static int vsc9953_gcb_miim_busy_status(struct ocelot *ocelot)
-{
- int val;
-
- ocelot_field_read(ocelot, GCB_MIIM_MII_STATUS_BUSY, &val);
-
- return val;
-}
-
-static int vsc9953_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
- u16 value)
-{
- struct ocelot *ocelot = bus->priv;
- int err, cmd, val;
-
- /* Wait while MIIM controller becomes idle */
- err = readx_poll_timeout(vsc9953_gcb_miim_pending_status, ocelot,
- val, !val, 10, VCS9953_MII_TIMEOUT);
- if (err) {
- dev_err(ocelot->dev, "MDIO write: pending timeout\n");
- goto out;
- }
-
- cmd = MSCC_MIIM_CMD_VLD | (phy_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
- (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
- (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
- MSCC_MIIM_CMD_OPR_WRITE;
-
- ocelot_write(ocelot, cmd, GCB_MIIM_MII_CMD);
-
-out:
- return err;
-}
-
-static int vsc9953_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
-{
- struct ocelot *ocelot = bus->priv;
- int err, cmd, val;
-
- /* Wait until MIIM controller becomes idle */
- err = readx_poll_timeout(vsc9953_gcb_miim_pending_status, ocelot,
- val, !val, 10, VCS9953_MII_TIMEOUT);
- if (err) {
- dev_err(ocelot->dev, "MDIO read: pending timeout\n");
- goto out;
- }
-
- /* Write the MIIM COMMAND register */
- cmd = MSCC_MIIM_CMD_VLD | (phy_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
- (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ;
-
- ocelot_write(ocelot, cmd, GCB_MIIM_MII_CMD);
-
- /* Wait while read operation via the MIIM controller is in progress */
- err = readx_poll_timeout(vsc9953_gcb_miim_busy_status, ocelot,
- val, !val, 10, VCS9953_MII_TIMEOUT);
- if (err) {
- dev_err(ocelot->dev, "MDIO read: busy timeout\n");
- goto out;
- }
-
- val = ocelot_read(ocelot, GCB_MIIM_MII_DATA);
-
- err = val & 0xFFFF;
-out:
- return err;
-}
/* CORE_ENA is in SYS:SYSTEM:RESET_CFG
* MEM_INIT is in SYS:SYSTEM:RESET_CFG
@@ -1086,7 +1003,6 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
{
struct felix *felix = ocelot_to_felix(ocelot);
struct device *dev = ocelot->dev;
- struct mii_bus *bus;
int port;
int rc;
@@ -1098,26 +1014,18 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
return -ENOMEM;
}
- bus = devm_mdiobus_alloc(dev);
- if (!bus)
- return -ENOMEM;
-
- bus->name = "VSC9953 internal MDIO bus";
- bus->read = vsc9953_mdio_read;
- bus->write = vsc9953_mdio_write;
- bus->parent = dev;
- bus->priv = ocelot;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
+ rc = felix_mdio_bus_alloc(ocelot);
+ if (rc < 0) {
+ dev_err(dev, "failed to allocate MDIO bus\n");
+ return rc;
+ }
- /* Needed in order to initialize the bus mutex lock */
- rc = mdiobus_register(bus);
+ rc = felix_mdio_register(ocelot);
if (rc < 0) {
dev_err(dev, "failed to register MDIO bus\n");
return rc;
}
- felix->imdio = bus;
-
for (port = 0; port < felix->info->num_ports; port++) {
struct ocelot_port *ocelot_port = ocelot->ports[port];
int addr = port + 4;
@@ -1162,7 +1070,7 @@ static void vsc9953_mdio_bus_free(struct ocelot *ocelot)
mdio_device_free(pcs->mdio);
lynx_pcs_destroy(pcs);
}
- mdiobus_unregister(felix->imdio);
+ felix_mdio_bus_free(ocelot);
}
static const struct felix_info seville_info_vsc9953 = {
Indirect MDIO access is a feature that doesn't need to be specific to the Seville driver. Separate the feature to a common file so it can be shared. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- drivers/net/dsa/ocelot/Makefile | 1 + drivers/net/dsa/ocelot/felix_mdio.c | 145 +++++++++++++++++++++++ drivers/net/dsa/ocelot/felix_mdio.h | 11 ++ drivers/net/dsa/ocelot/seville_vsc9953.c | 108 ++--------------- 4 files changed, 165 insertions(+), 100 deletions(-) create mode 100644 drivers/net/dsa/ocelot/felix_mdio.c create mode 100644 drivers/net/dsa/ocelot/felix_mdio.h