diff mbox series

[iproute2-next,v2,15/19] bridge: vlan: add global mcast_query_interval option

Message ID 20210828110805.463429-16-razor@blackwall.org
State New
Headers show
Series bridge: vlan: add global multicast options | expand

Commit Message

Nikolay Aleksandrov Aug. 28, 2021, 11:08 a.m. UTC 
From: Nikolay Aleksandrov <nikolay@nvidia.com>

Add control and dump support for the global mcast_query_interval
option which controls the interval between queries sent by the bridge
after the end of the startup phase. To be consistent with the same
bridge-wide option the value is reported with USER_HZ granularity and
the same granularity is expected when setting it.
Syntax:
 $ bridge vlan global set dev bridge vid 1 mcast_query_interval 13000

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
---
v2: adjust help msg alignment to fit in 100 columns

 bridge/vlan.c     | 15 +++++++++++++++
 man/man8/bridge.8 |  9 ++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/bridge/vlan.c b/bridge/vlan.c
index 5494dd15c76e..d7fb27ea752a 100644
--- a/bridge/vlan.c
+++ b/bridge/vlan.c
@@ -47,6 +47,7 @@  static void usage(void)
 		"                      [ mcast_startup_query_count STARTUP_QUERY_COUNT ]\n"
 		"                      [ mcast_membership_interval MEMBERSHIP_INTERVAL ]\n"
 		"                      [ mcast_querier_interval QUERIER_INTERVAL ]\n"
+		"                      [ mcast_query_interval QUERY_INTERVAL ]\n"
 		"       bridge vlan global { show } [ dev DEV ] [ vid VLAN_ID ]\n");
 	exit(-1);
 }
@@ -466,6 +467,14 @@  static int vlan_global_option_set(int argc, char **argv)
 			addattr64(&req.n, 1024,
 				  BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_INTVL,
 				  val64);
+		} else if (strcmp(*argv, "mcast_query_interval") == 0) {
+			NEXT_ARG();
+			if (get_u64(&val64, *argv, 0))
+				invarg("invalid mcast_query_interval",
+				       *argv);
+			addattr64(&req.n, 1024,
+				  BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL,
+				  val64);
 		} else {
 			if (matches(*argv, "help") == 0)
 				NEXT_ARG();
@@ -844,6 +853,12 @@  static void print_vlan_global_opts(struct rtattr *a, int ifindex)
 			     "mcast_querier_interval %llu ",
 			     rta_getattr_u64(vattr));
 	}
+	if (vtb[BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL]) {
+		vattr = vtb[BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL];
+		print_lluint(PRINT_ANY, "mcast_query_interval",
+			     "mcast_query_interval %llu ",
+			     rta_getattr_u64(vattr));
+	}
 	print_nl();
 	close_json_object();
 }
diff --git a/man/man8/bridge.8 b/man/man8/bridge.8
index f5c72ec83f93..cb1170f8d5c9 100644
--- a/man/man8/bridge.8
+++ b/man/man8/bridge.8
@@ -173,7 +173,9 @@  bridge \- show / manipulate bridge addresses and devices
 .B mcast_membership_interval
 .IR MEMBERSHIP_INTERVAL " ] [ "
 .B mcast_querier_interval
-.IR QUERIER_INTERVAL " ]"
+.IR QUERIER_INTERVAL " ] [ "
+.B mcast_query_interval
+.IR QUERY_INTERVAL " ]"
 
 .ti -8
 .BR "bridge vlan global" " [ " show " ] [ "
@@ -981,6 +983,11 @@  after this delay has passed, the bridge will start to send its own queries
 .BI mcast_querier
 was enabled).
 
+.TP
+.BI mcast_query_interval " QUERY_INTERVAL "
+interval between queries sent by the bridge after the end of the
+startup phase.
+
 .SS bridge vlan global show - list global vlan options.
 
 This command displays the global VLAN options for each VLAN entry.