@@ -171,15 +171,6 @@ accepted incorrect commands will return an error. Users should make sure that
all arguments passed to ``device_add`` are consistent with the documented
property types.
-System accelerators
--------------------
-
-MIPS ``Trap-and-Emul`` KVM support (since 6.0)
-''''''''''''''''''''''''''''''''''''''''''''''
-
-The MIPS ``Trap-and-Emul`` KVM host and guest support has been removed
-from Linux upstream kernel, declare it deprecated.
-
Host Architectures
------------------
@@ -652,6 +652,15 @@ Userspace local APIC with KVM (x86, removed 8.0)
a local APIC. The ``split`` setting is supported, as is using ``-M
kernel-irqchip=off`` when the CPU does not have a local APIC.
+System accelerators
+-------------------
+
+MIPS "Trap-and-Emulate" KVM support (removed in 8.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The MIPS "Trap-and-Emulate" KVM host and guest support was removed
+from Linux in 2021, and is not supported anymore by QEMU either.
+
System emulator machines
------------------------
@@ -57,6 +57,7 @@
#include "semihosting/semihost.h"
#include "hw/mips/cps.h"
#include "hw/qdev-clock.h"
+#include "target/mips/internal.h"
#include "trace.h"
#define ENVP_PADDR 0x2000
@@ -875,7 +876,6 @@ static uint64_t load_kernel(void)
uint32_t *prom_buf;
long prom_size;
int prom_index = 0;
- uint64_t (*xlate_to_kseg0) (void *opaque, uint64_t addr);
uint8_t rng_seed[32];
char rng_seed_hex[sizeof(rng_seed) * 2 + 1];
size_t rng_seed_prom_offset;
@@ -899,19 +899,10 @@ static uint64_t load_kernel(void)
}
/* Check where the kernel has been linked */
- if (kernel_entry & 0x80000000ll) {
- if (kvm_enabled()) {
- error_report("KVM guest kernels must be linked in useg. "
- "Did you forget to enable CONFIG_KVM_GUEST?");
- exit(1);
- }
-
- xlate_to_kseg0 = cpu_mips_phys_to_kseg0;
- } else {
- /* if kernel entry is in useg it is probably a KVM T&E kernel */
- mips_um_ksegs_enable();
-
- xlate_to_kseg0 = cpu_mips_kvm_um_phys_to_kseg0;
+ if (kernel_entry <= USEG_LIMIT) {
+ error_report("Trap-and-Emul kernels (Linux CONFIG_KVM_GUEST)"
+ " are not supported");
+ exit(1);
}
/* load initrd */
@@ -952,7 +943,7 @@ static uint64_t load_kernel(void)
if (initrd_size > 0) {
prom_set(prom_buf, prom_index++,
"rd_start=0x%" PRIx64 " rd_size=%" PRId64 " %s",
- xlate_to_kseg0(NULL, initrd_offset),
+ cpu_mips_phys_to_kseg0(NULL, initrd_offset),
initrd_size, loaderparams.kernel_cmdline);
} else {
prom_set(prom_buf, prom_index++, "%s", loaderparams.kernel_cmdline);
@@ -1019,11 +1010,6 @@ static void main_cpu_reset(void *opaque)
}
malta_mips_config(cpu);
-
- if (kvm_enabled()) {
- /* Start running from the bootloader we wrote to end of RAM */
- env->active_tc.PC = 0x40000000 + loaderparams.ram_low_size;
- }
}
static void create_cpu_without_cps(MachineState *ms, MaltaState *s,
@@ -1157,13 +1143,7 @@ void mips_malta_init(MachineState *machine)
fl_idx++;
if (kernel_filename) {
ram_low_size = MIN(ram_size, 256 * MiB);
- /* For KVM we reserve 1MB of RAM for running bootloader */
- if (kvm_enabled()) {
- ram_low_size -= 0x100000;
- bootloader_run_addr = cpu_mips_kvm_um_phys_to_kseg0(NULL, ram_low_size);
- } else {
- bootloader_run_addr = cpu_mips_phys_to_kseg0(NULL, RESET_ADDRESS);
- }
+ bootloader_run_addr = cpu_mips_phys_to_kseg0(NULL, RESET_ADDRESS);
/* Write a small bootloader to the flash location. */
loaderparams.ram_size = ram_size;
@@ -1180,20 +1160,8 @@ void mips_malta_init(MachineState *machine)
write_bootloader_nanomips(memory_region_get_ram_ptr(bios),
bootloader_run_addr, kernel_entry);
}
- if (kvm_enabled()) {
- /* Write the bootloader code @ the end of RAM, 1MB reserved */
- write_bootloader(memory_region_get_ram_ptr(ram_low_preio) +
- ram_low_size,
- bootloader_run_addr, kernel_entry);
- }
} else {
target_long bios_size = FLASH_SIZE;
- /* The flash region isn't executable from a KVM guest */
- if (kvm_enabled()) {
- error_report("KVM enabled but no -kernel argument was specified. "
- "Booting from flash is not supported with KVM.");
- exit(1);
- }
/* Load firmware from flash. */
if (!dinfo) {
/* Load a BIOS image. */
@@ -292,12 +292,7 @@ static void mips_cpu_reset_hold(Object *obj)
env->tlb->tlb_in_use = env->tlb->nb_tlb;
env->CP0_Wired = 0;
env->CP0_GlobalNumber = (cs->cpu_index & 0xFF) << CP0GN_VPId;
- env->CP0_EBase = (cs->cpu_index & 0x3FF);
- if (mips_um_ksegs_enabled()) {
- env->CP0_EBase |= 0x40000000;
- } else {
- env->CP0_EBase |= (int32_t)0x80000000;
- }
+ env->CP0_EBase = KSEG0_BASE | (cs->cpu_index & 0x3FF);
if (env->CP0_Config3 & (1 << CP0C3_CMGCR)) {
env->CP0_CMGCRBase = 0x1fbf8000 >> 4;
}
@@ -1296,11 +1296,8 @@ void cpu_set_exception_base(int vp_index, target_ulong address);
uint64_t cpu_mips_kseg0_to_phys(void *opaque, uint64_t addr);
uint64_t cpu_mips_phys_to_kseg0(void *opaque, uint64_t addr);
-uint64_t cpu_mips_kvm_um_phys_to_kseg0(void *opaque, uint64_t addr);
uint64_t cpu_mips_kseg1_to_phys(void *opaque, uint64_t addr);
uint64_t cpu_mips_phys_to_kseg1(void *opaque, uint64_t addr);
-bool mips_um_ksegs_enabled(void);
-void mips_um_ksegs_enable(void);
#if !defined(CONFIG_USER_ONLY)
@@ -99,9 +99,6 @@ int mips_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
#define KSEG2_BASE ((target_ulong)(int32_t)0xC0000000UL)
#define KSEG3_BASE ((target_ulong)(int32_t)0xE0000000UL)
-#define KVM_KSEG0_BASE ((target_ulong)(int32_t)0x40000000UL)
-#define KVM_KSEG2_BASE ((target_ulong)(int32_t)0x60000000UL)
-
#if !defined(CONFIG_USER_ONLY)
enum {
@@ -1268,25 +1268,16 @@ int kvm_arch_msi_data_to_gsi(uint32_t data)
int mips_kvm_type(MachineState *machine, const char *vm_type)
{
-#if defined(KVM_CAP_MIPS_VZ) || defined(KVM_CAP_MIPS_TE)
+#if defined(KVM_CAP_MIPS_VZ)
int r;
KVMState *s = KVM_STATE(machine->accelerator);
-#endif
-#if defined(KVM_CAP_MIPS_VZ)
r = kvm_check_extension(s, KVM_CAP_MIPS_VZ);
if (r > 0) {
return KVM_VM_MIPS_VZ;
}
#endif
-#if defined(KVM_CAP_MIPS_TE)
- r = kvm_check_extension(s, KVM_CAP_MIPS_TE);
- if (r > 0) {
- return KVM_VM_MIPS_TE;
- }
-#endif
-
return -1;
}
@@ -23,8 +23,6 @@
#include "qemu/osdep.h"
#include "cpu.h"
-static int mips_um_ksegs;
-
uint64_t cpu_mips_kseg0_to_phys(void *opaque, uint64_t addr)
{
return addr & 0x1fffffffll;
@@ -35,11 +33,6 @@ uint64_t cpu_mips_phys_to_kseg0(void *opaque, uint64_t addr)
return addr | ~0x7fffffffll;
}
-uint64_t cpu_mips_kvm_um_phys_to_kseg0(void *opaque, uint64_t addr)
-{
- return addr | 0x40000000ll;
-}
-
uint64_t cpu_mips_kseg1_to_phys(void *opaque, uint64_t addr)
{
return addr & 0x1fffffffll;
@@ -49,13 +42,3 @@ uint64_t cpu_mips_phys_to_kseg1(void *opaque, uint64_t addr)
{
return (addr & 0x1fffffffll) | 0xffffffffa0000000ll;
}
-
-bool mips_um_ksegs_enabled(void)
-{
- return mips_um_ksegs;
-}
-
-void mips_um_ksegs_enable(void)
-{
- mips_um_ksegs = 1;
-}
@@ -130,19 +130,6 @@ int get_physical_address(CPUMIPSState *env, hwaddr *physical,
/* effective address (modified for KVM T&E kernel segments) */
target_ulong address = real_address;
- if (mips_um_ksegs_enabled()) {
- /* KVM T&E adds guest kernel segments in useg */
- if (real_address >= KVM_KSEG0_BASE) {
- if (real_address < KVM_KSEG2_BASE) {
- /* kseg0 */
- address += KSEG0_BASE - KVM_KSEG0_BASE;
- } else if (real_address <= USEG_LIMIT) {
- /* kseg2/3 */
- address += KSEG2_BASE - KVM_KSEG2_BASE;
- }
- }
- }
-
if (address <= USEG_LIMIT) {
/* useg */
uint16_t segctl;