diff mbox series

[5.4,14/41] r8169: change back SG and TSO to be disabled by default

Message ID 20200411115505.093276503@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman April 11, 2020, 12:09 p.m. UTC 
From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 95099c569a9fdbe186a27447dfa8a5a0562d4b7f ]

There has been a number of reports that using SG/TSO on different chip
versions results in tx timeouts. However for a lot of people SG/TSO
works fine. Therefore disable both features by default, but allow users
to enable them. Use at own risk!

Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169_main.c |   34 ++++++++++++++----------------
 1 file changed, 16 insertions(+), 18 deletions(-)
diff mbox series

Patch

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -7167,12 +7167,10 @@  static int rtl_init_one(struct pci_dev *
 
 	netif_napi_add(dev, &tp->napi, rtl8169_poll, NAPI_POLL_WEIGHT);
 
-	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
-		NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
-		NETIF_F_HW_VLAN_CTAG_RX;
-	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
-		NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
-		NETIF_F_HW_VLAN_CTAG_RX;
+	dev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+			 NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+			   NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
 		NETIF_F_HIGHDMA;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
@@ -7190,25 +7188,25 @@  static int rtl_init_one(struct pci_dev *
 		dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX;
 
 	if (rtl_chip_supports_csum_v2(tp)) {
-		dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
-		dev->features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+		dev->hw_features |= NETIF_F_IPV6_CSUM;
+		dev->features |= NETIF_F_IPV6_CSUM;
+	}
+
+	/* There has been a number of reports that using SG/TSO results in
+	 * tx timeouts. However for a lot of people SG/TSO works fine.
+	 * Therefore disable both features by default, but allow users to
+	 * enable them. Use at own risk!
+	 */
+	if (rtl_chip_supports_csum_v2(tp)) {
+		dev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6;
 		dev->gso_max_size = RTL_GSO_MAX_SIZE_V2;
 		dev->gso_max_segs = RTL_GSO_MAX_SEGS_V2;
 	} else {
+		dev->hw_features |= NETIF_F_SG | NETIF_F_TSO;
 		dev->gso_max_size = RTL_GSO_MAX_SIZE_V1;
 		dev->gso_max_segs = RTL_GSO_MAX_SEGS_V1;
 	}
 
-	/* RTL8168e-vl and one RTL8168c variant are known to have a
-	 * HW issue with TSO.
-	 */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_34 ||
-	    tp->mac_version == RTL_GIGA_MAC_VER_22) {
-		dev->vlan_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
-		dev->hw_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
-		dev->features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
-	}
-
 	dev->hw_features |= NETIF_F_RXALL;
 	dev->hw_features |= NETIF_F_RXFCS;