diff mbox series

[5.7,063/477] scsi: hisi_sas: Do not reset phy timer to wait for stray phy up

Message ID 20200623195410.596418806@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH June 23, 2020, 7:51 p.m. UTC 
From: Luo Jiaxing <luojiaxing@huawei.com>

[ Upstream commit e16b9ed61e078d836a0f24a82080cf29d7539c7e ]

We found out that after phy up, the hardware reports another oob interrupt
but did not follow a phy up interrupt:

oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout

We run link reset when wait phy up timeout, and it send a normal disk into
reset processing. So we made some circumvention action in the code, so that
this abnormal oob interrupt will not start the timer to wait for phy up.

Link: https://lore.kernel.org/r/1589552025-165012-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9a6deb21fe4df..11caa4b0d7977 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -898,8 +898,11 @@  void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no)
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct device *dev = hisi_hba->dev;
 
+	dev_dbg(dev, "phy%d OOB ready\n", phy_no);
+	if (phy->phy_attached)
+		return;
+
 	if (!timer_pending(&phy->timer)) {
-		dev_dbg(dev, "phy%d OOB ready\n", phy_no);
 		phy->timer.expires = jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT * HZ;
 		add_timer(&phy->timer);
 	}