diff mbox series

[5.8,175/177] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

Message ID 20200915140702.091967714@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Sept. 15, 2020, 2:14 p.m. UTC 
From: Utkarsh Patel <utkarsh.h.patel@intel.com>

commit 7c6bbdf086ac7f1374bcf1ef0994b15109ecaf48 upstream.

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bits 4 and 5 are reserved in Alternate modes.
SBU Orientation and HSL Orientation needs to be configured only during
initial cable detection in USB connect flow based on device property of
"sbu-orientation" and "hsl-orientation".
Configuring these reserved bits in the Alternate modes may result in delay
in display link training or some unexpected behaviour.
So do not configure them while issuing Alternate Mode requests.

Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200907142152.35678-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/typec/mux/intel_pmc_mux.c |    8 --------
 1 file changed, 8 deletions(-)
diff mbox series

Patch

--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -56,8 +56,6 @@  enum {
 
 #define PMC_USB_ALTMODE_ORI_SHIFT	1
 #define PMC_USB_ALTMODE_UFP_SHIFT	3
-#define PMC_USB_ALTMODE_ORI_AUX_SHIFT	4
-#define PMC_USB_ALTMODE_ORI_HSL_SHIFT	5
 
 /* DP specific Mode Data bits */
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
@@ -173,9 +171,6 @@  pmc_usb_mux_dp(struct pmc_usb_port *port
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
@@ -203,9 +198,6 @@  pmc_usb_mux_tbt(struct pmc_usb_port *por
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
 		req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;