diff mbox series

[4.14,128/191] arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts

Message ID 20201027134915.859844840@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Oct. 27, 2020, 1:49 p.m. UTC 
From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 027cca9eb5b450c3f6bb916ba999144c2ec23cb7 ]

The mdss node sets #interrupt-cells = <1>, so its interrupts
should be referenced using a single cell (in this case: only the
interrupt number).

However, right now the mdp/dsi node both have two interrupt cells
set, e.g. interrupts = <4 0>. The 0 is probably meant to say
IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is
actually interpreted as a second interrupt line.

Remove the IRQ flags from both interrupts to fix this.

Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-5-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 3cc449425a038..02b7a44f790b5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -818,7 +818,7 @@  mdp: mdp@1a01000 {
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -850,7 +850,7 @@  dsi0: dsi@1a98000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;