From patchwork Mon Dec 28 12:42:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Greg Kroah-Hartman X-Patchwork-Id: 354964 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9BBD5C433E9 for ; Mon, 28 Dec 2020 14:06:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7285E207AB for ; Mon, 28 Dec 2020 14:06:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2437608AbgL1OFW (ORCPT ); Mon, 28 Dec 2020 09:05:22 -0500 Received: from mail.kernel.org ([198.145.29.99]:39626 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2437603AbgL1OFU (ORCPT ); Mon, 28 Dec 2020 09:05:20 -0500 Received: by mail.kernel.org (Postfix) with ESMTPSA id D37A9206D4; Mon, 28 Dec 2020 14:04:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linuxfoundation.org; s=korg; t=1609164279; bh=8kdiTmAs+/MqIjQzw6RgGMxwUpnXUF5q/Lslf2MH8JE=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=DXCLR/SvYZXnyL4uZxZlbdADkHf6GMj2BFDwbpH9BiViekbmgSfXi4LuCd5ylLNwv CJJGnn+WypMw5C5Kv4iMqR+Afkau2Mbph+L9InZ88rfM4a73rFGwbNgB34KgW8Yrfc Owq334vlTkKS9QT7Oa2cjwBXc8YtFDMBwpHfssxc= From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Hugues Fruchet , Jacopo Mondi , Lad Prabhakar , Sakari Ailus , Mauro Carvalho Chehab , Sasha Levin Subject: [PATCH 5.10 125/717] media: ov5640: fix support of BT656 bus mode Date: Mon, 28 Dec 2020 13:42:03 +0100 Message-Id: <20201228125026.937508218@linuxfoundation.org> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20201228125020.963311703@linuxfoundation.org> References: <20201228125020.963311703@linuxfoundation.org> User-Agent: quilt/0.66 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: stable@vger.kernel.org From: Hugues Fruchet [ Upstream commit 68579b32e786f9680e7c6b6c7d17e26943bb02b3 ] Fix PCLK polarity not being taken into account. Add comments about BT656 register control. Remove useless ov5640_set_stream_bt656() function. Refine comments about MIPI IO register control. Fixes: 4039b03720f7 ("media: i2c: ov5640: Add support for BT656 mode") Signed-off-by: Hugues Fruchet Reviewed-by: Jacopo Mondi Tested-by: Lad Prabhakar Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/i2c/ov5640.c | 82 +++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 37 deletions(-) diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 8d0254d0e5ea7..8f0812e859012 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -1216,20 +1216,6 @@ static int ov5640_set_autogain(struct ov5640_dev *sensor, bool on) BIT(1), on ? 0 : BIT(1)); } -static int ov5640_set_stream_bt656(struct ov5640_dev *sensor, bool on) -{ - int ret; - - ret = ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, - on ? 0x1 : 0x00); - if (ret) - return ret; - - return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ? - OV5640_REG_SYS_CTRL0_SW_PWUP : - OV5640_REG_SYS_CTRL0_SW_PWDN); -} - static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on) { return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ? @@ -1994,13 +1980,13 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on) { unsigned int flags = sensor->ep.bus.parallel.flags; - u8 pclk_pol = 0; - u8 hsync_pol = 0; - u8 vsync_pol = 0; + bool bt656 = sensor->ep.bus_type == V4L2_MBUS_BT656; + u8 polarities = 0; int ret; if (!on) { /* Reset settings to their default values. */ + ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, 0x00); ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, 0x20); ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x00); @@ -2024,7 +2010,35 @@ static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on) * - VSYNC: active high * - HREF: active low * - PCLK: active low + * + * VSYNC & HREF are not configured if BT656 bus mode is selected */ + + /* + * BT656 embedded synchronization configuration + * + * CCIR656 CTRL00 + * - [7]: SYNC code selection (0: auto generate sync code, + * 1: sync code from regs 0x4732-0x4735) + * - [6]: f value in CCIR656 SYNC code when fixed f value + * - [5]: Fixed f value + * - [4:3]: Blank toggle data options (00: data=1'h040/1'h200, + * 01: data from regs 0x4736-0x4738, 10: always keep 0) + * - [1]: Clip data disable + * - [0]: CCIR656 mode enable + * + * Default CCIR656 SAV/EAV mode with default codes + * SAV=0xff000080 & EAV=0xff00009d is enabled here with settings: + * - CCIR656 mode enable + * - auto generation of sync codes + * - blank toggle data 1'h040/1'h200 + * - clip reserved data (0x00 & 0xff changed to 0x01 & 0xfe) + */ + ret = ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, + bt656 ? 0x01 : 0x00); + if (ret) + return ret; + /* * configure parallel port control lines polarity * @@ -2035,29 +2049,26 @@ static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on) * datasheet and hardware, 0 is active high * and 1 is active low...) */ - if (sensor->ep.bus_type == V4L2_MBUS_PARALLEL) { - if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) - pclk_pol = 1; + if (!bt656) { if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) - hsync_pol = 1; + polarities |= BIT(1); if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) - vsync_pol = 1; - - ret = ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, - (pclk_pol << 5) | (hsync_pol << 1) | - vsync_pol); - - if (ret) - return ret; + polarities |= BIT(0); } + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + polarities |= BIT(5); + + ret = ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, polarities); + if (ret) + return ret; /* - * powerdown MIPI TX/RX PHY & disable MIPI + * powerdown MIPI TX/RX PHY & enable DVP * * MIPI CONTROL 00 - * 4: PWDN PHY TX - * 3: PWDN PHY RX - * 2: MIPI enable + * [4] = 1 : Power down MIPI HS Tx + * [3] = 1 : Power down MIPI LS Rx + * [2] = 0 : DVP enable (MIPI disable) */ ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x18); if (ret) @@ -2074,8 +2085,7 @@ static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on) * - [3:0]: D[9:6] output enable */ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, - sensor->ep.bus_type == V4L2_MBUS_PARALLEL ? - 0x7f : 0x1f); + bt656 ? 0x1f : 0x7f); if (ret) return ret; @@ -2925,8 +2935,6 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable) if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) ret = ov5640_set_stream_mipi(sensor, enable); - else if (sensor->ep.bus_type == V4L2_MBUS_BT656) - ret = ov5640_set_stream_bt656(sensor, enable); else ret = ov5640_set_stream_dvp(sensor, enable);