@@ -4616,6 +4616,7 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
dc_plane_state->global_alpha_value = plane_info.global_alpha_value;
dc_plane_state->dcc = plane_info.dcc;
dc_plane_state->layer_index = plane_info.layer_index; // Always returns 0
+ dc_plane_state->flip_int_enabled = true;
/*
* Always set input transfer function, since plane state is refreshed
@@ -889,6 +889,7 @@ struct dc_plane_state {
int layer_index;
union surface_update_flags update_flags;
+ bool flip_int_enabled;
/* private to DC core */
struct dc_plane_status status;
struct dc_context *ctx;
@@ -1257,6 +1257,16 @@ void hubp1_soft_reset(struct hubp *hubp, bool reset)
REG_UPDATE(DCHUBP_CNTL, HUBP_DISABLE, reset ? 1 : 0);
}
+void hubp1_set_flip_int(struct hubp *hubp)
+{
+ struct dcn10_hubp *hubp1 = TO_DCN10_HUBP(hubp);
+
+ REG_UPDATE(DCSURF_SURFACE_FLIP_INTERRUPT,
+ SURFACE_FLIP_INT_MASK, 1);
+
+ return;
+}
+
void hubp1_init(struct hubp *hubp)
{
//do nothing
@@ -1290,6 +1300,7 @@ static const struct hubp_funcs dcn10_hubp_funcs = {
.dmdata_load = NULL,
.hubp_soft_reset = hubp1_soft_reset,
.hubp_in_blank = hubp1_in_blank,
+ .hubp_set_flip_int = hubp1_set_flip_int,
};
/*****************************************/
@@ -74,6 +74,7 @@
SRI(DCSURF_SURFACE_EARLIEST_INUSE_C, HUBPREQ, id),\
SRI(DCSURF_SURFACE_EARLIEST_INUSE_HIGH_C, HUBPREQ, id),\
SRI(DCSURF_SURFACE_CONTROL, HUBPREQ, id),\
+ SRI(DCSURF_SURFACE_FLIP_INTERRUPT, HUBPREQ, id),\
SRI(HUBPRET_CONTROL, HUBPRET, id),\
SRI(DCN_EXPANSION_MODE, HUBPREQ, id),\
SRI(DCHUBP_REQ_SIZE_CONFIG, HUBP, id),\
@@ -183,6 +184,7 @@
uint32_t DCSURF_SURFACE_EARLIEST_INUSE_C; \
uint32_t DCSURF_SURFACE_EARLIEST_INUSE_HIGH_C; \
uint32_t DCSURF_SURFACE_CONTROL; \
+ uint32_t DCSURF_SURFACE_FLIP_INTERRUPT; \
uint32_t HUBPRET_CONTROL; \
uint32_t DCN_EXPANSION_MODE; \
uint32_t DCHUBP_REQ_SIZE_CONFIG; \
@@ -332,6 +334,7 @@
HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_META_SURFACE_TMZ_C, mask_sh),\
HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_EN, mask_sh),\
HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_IND_64B_BLK, mask_sh),\
+ HUBP_SF(HUBPREQ0_DCSURF_SURFACE_FLIP_INTERRUPT, SURFACE_FLIP_INT_MASK, mask_sh),\
HUBP_SF(HUBPRET0_HUBPRET_CONTROL, DET_BUF_PLANE1_BASE_ADDRESS, mask_sh),\
HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CB_B, mask_sh),\
HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CR_R, mask_sh),\
@@ -531,6 +534,7 @@
type PRIMARY_SURFACE_DCC_IND_64B_BLK;\
type SECONDARY_SURFACE_DCC_EN;\
type SECONDARY_SURFACE_DCC_IND_64B_BLK;\
+ type SURFACE_FLIP_INT_MASK;\
type DET_BUF_PLANE1_BASE_ADDRESS;\
type CROSSBAR_SRC_CB_B;\
type CROSSBAR_SRC_CR_R;\
@@ -777,4 +781,6 @@ void hubp1_read_state_common(struct hubp *hubp);
bool hubp1_in_blank(struct hubp *hubp);
void hubp1_soft_reset(struct hubp *hubp, bool reset);
+void hubp1_set_flip_int(struct hubp *hubp);
+
#endif
@@ -2195,6 +2195,13 @@ static void dcn10_enable_plane(
if (dc->debug.sanity_checks) {
hws->funcs.verify_allow_pstate_change_high(dc);
}
+
+ if (!pipe_ctx->top_pipe
+ && pipe_ctx->plane_state
+ && pipe_ctx->plane_state->flip_int_enabled
+ && pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int)
+ pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int(pipe_ctx->plane_res.hubp);
+
}
void dcn10_program_gamut_remap(struct pipe_ctx *pipe_ctx)
@@ -1597,6 +1597,7 @@ static struct hubp_funcs dcn20_hubp_funcs = {
.validate_dml_output = hubp2_validate_dml_output,
.hubp_in_blank = hubp1_in_blank,
.hubp_soft_reset = hubp1_soft_reset,
+ .hubp_set_flip_int = hubp1_set_flip_int,
};
@@ -1146,6 +1146,12 @@ void dcn20_enable_plane(
pipe_ctx->plane_res.hubp->funcs->hubp_set_vm_system_aperture_settings(pipe_ctx->plane_res.hubp, &apt);
}
+ if (!pipe_ctx->top_pipe
+ && pipe_ctx->plane_state
+ && pipe_ctx->plane_state->flip_int_enabled
+ && pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int)
+ pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int(pipe_ctx->plane_res.hubp);
+
// if (dc->debug.sanity_checks) {
// dcn10_verify_allow_pstate_change_high(dc);
// }
@@ -838,6 +838,7 @@ static struct hubp_funcs dcn21_hubp_funcs = {
.hubp_set_flip_control_surface_gsl = hubp2_set_flip_control_surface_gsl,
.hubp_init = hubp21_init,
.validate_dml_output = hubp21_validate_dml_output,
+ .hubp_set_flip_int = hubp1_set_flip_int,
};
bool hubp21_construct(
@@ -511,6 +511,7 @@ static struct hubp_funcs dcn30_hubp_funcs = {
.hubp_init = hubp3_init,
.hubp_in_blank = hubp1_in_blank,
.hubp_soft_reset = hubp1_soft_reset,
+ .hubp_set_flip_int = hubp1_set_flip_int,
};
bool hubp3_construct(
@@ -191,6 +191,8 @@ struct hubp_funcs {
bool (*hubp_in_blank)(struct hubp *hubp);
void (*hubp_soft_reset)(struct hubp *hubp, bool reset);
+ void (*hubp_set_flip_int)(struct hubp *hubp);
+
};
#endif