diff mbox series

[5.12,047/384] mmc: core: Do a power cycle when the CMD11 fails

Message ID 20210510102016.428509404@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman May 10, 2021, 10:17 a.m. UTC 
From: DooHyun Hwang <dh0421.hwang@samsung.com>

commit 147186f531ae49c18b7a9091a2c40e83b3d95649 upstream.

A CMD11 is sent to the SD/SDIO card to start the voltage switch procedure
into 1.8V I/O. According to the SD spec a power cycle is needed of the
card, if it turns out that the CMD11 fails. Let's fix this, to allow a
retry of the initialization without the voltage switch, to succeed.

Note that, whether it makes sense to also retry with the voltage switch
after the power cycle is a bit more difficult to know. At this point, we
treat it like the CMD11 isn't supported and therefore we skip it when
retrying.

Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com>
Link: https://lore.kernel.org/r/20210210045936.7809-1-dh0421.hwang@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1207,7 +1207,7 @@  int mmc_set_uhs_voltage(struct mmc_host
 
 	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
-		return err;
+		goto power_cycle;
 
 	if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
 		return -EIO;