diff mbox series

[5.10,159/530] arm64: dts: qcom: sm8250: fix number of pins in gpio-ranges

Message ID 20210512144825.069484481@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman May 12, 2021, 2:44 p.m. UTC
From: Shawn Guo <shawn.guo@linaro.org>


[ Upstream commit e526cb03e2aed42866a0919485a3d8ac130972cf ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Link: https://lore.kernel.org/r/20210303033106.549-4-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-- 
2.30.2
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index f96c8a4fc3cc..d4547a192748 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1555,7 +1555,7 @@ 
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 180>;
+			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
 			qup_i2c0_default: qup-i2c0-default {