diff mbox series

[5.10,274/289] ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section

Message ID 20210517140314.363696055@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman May 17, 2021, 2:03 p.m. UTC 
From: Ard Biesheuvel <ardb@kernel.org>

commit 10fce53c0ef8f6e79115c3d9e0d7ea1338c3fa37 upstream

The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order
bits of R2, and decides that no ATAGS/DTB were provided if the resulting
value is 0x0.

This means that on systems where DRAM starts at 0x0 (such as Raspberry
Pi), no explicit mapping of the DT will be created if R2 points into the
first 1 MB section of memory. This was not a problem before, because the
decompressed kernel is loaded at the base of DRAM and mapped using
sections as well, and so as long as the DT is referenced via a virtual
address that uses the same translation (the linear map, in this case),
things work fine.

However, commit 7a1be318f579 ("9012/1: move device tree mapping out of
linear region") changes this, and now the DT is referenced via a virtual
address that is disjoint from the linear mapping of DRAM, and so we need
the early code to create the DT mapping unconditionally.

So let's create the early DT mapping for any value of R2 != 0x0.

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/head.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -274,10 +274,10 @@  __create_page_tables:
 	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
-	movs	r0, r0, lsl #SECTION_SHIFT
+	cmp	r2, #0
 	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
 	addne	r3, r3, r4
-	orrne	r6, r7, r0
+	orrne	r6, r7, r0, lsl #SECTION_SHIFT
 	strne	r6, [r3], #1 << PMD_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]