diff mbox series

[5.4,083/108] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

Message ID 20210726153834.334042332@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman July 26, 2021, 3:39 p.m. UTC 
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.

This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.

    renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22

To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().

Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/renesas_usbhs/fifo.c |    7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -101,6 +101,8 @@  static struct dma_chan *usbhsf_dma_chan_
 #define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
 #define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
 static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -123,6 +125,11 @@  struct usbhs_pkt *usbhs_pkt_pop(struct u
 		if (chan) {
 			dmaengine_terminate_all(chan);
 			usbhsf_dma_unmap(pkt);
+		} else {
+			if (usbhs_pipe_is_dir_in(pipe))
+				usbhsf_rx_irq_ctrl(pipe, 0);
+			else
+				usbhsf_tx_irq_ctrl(pipe, 0);
 		}
 
 		usbhs_pipe_clear_without_sequence(pipe, 0, 0);