@@ -142,6 +142,8 @@
#define MPT_MAX_CALLBACKS 32
+#define MPT_MAX_HBA_NUM_PHYS 32
+
#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
/* reserved for issuing internally framed scsi io cmds */
#define INTERNAL_SCSIIO_CMDS_COUNT 3
@@ -798,6 +800,7 @@ struct _sas_phy {
* @enclosure_handle: handle for this a member of an enclosure
* @device_info: bitwise defining capabilities of this sas_host/expander
* @responding: used in _scsih_expander_device_mark_responding
+ * @nr_phys_allocated: Allocated memory for this many count phys
* @phy: a list of phys that make up this sas_host/expander
* @sas_port_list: list of ports attached to this sas_host/expander
* @port: hba port entry containing node's port number info
@@ -813,6 +816,7 @@ struct _sas_node {
u16 enclosure_handle;
u64 enclosure_logical_id;
u8 responding;
+ u8 nr_phys_allocated;
struct hba_port *port;
struct _sas_phy *phy;
struct list_head sas_port_list;
@@ -6406,11 +6406,26 @@ _scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc)
int i, j, count = 0, lcount = 0;
int ret;
u64 sas_addr;
+ u8 num_phys;
drsprintk(ioc, ioc_info(ioc,
"updating ports for sas_host(0x%016llx)\n",
(unsigned long long)ioc->sas_hba.sas_address));
+ mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+ if (!num_phys) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ if (num_phys > ioc->sas_hba.nr_phys_allocated) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+ ioc->sas_hba.num_phys = num_phys;
+
port_table = kcalloc(ioc->sas_hba.num_phys,
sizeof(struct hba_port), GFP_KERNEL);
if (!port_table)
@@ -6611,6 +6626,30 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
ioc->sas_hba.phy[i].hba_vphy = 1;
}
+ /*
+ * Add new HBA phys to STL if these new phys got added as part
+ * of HBA Firmware upgrade/downgrade operation.
+ */
+ if (!ioc->sas_hba.phy[i].phy) {
+ if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply,
+ &phy_pg0, i))) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ continue;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ ioc_err(ioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ continue;
+ }
+ ioc->sas_hba.phy[i].phy_id = i;
+ mpt3sas_transport_add_host_phy(ioc,
+ &ioc->sas_hba.phy[i], phy_pg0,
+ ioc->sas_hba.parent_dev);
+ continue;
+ }
ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
AttachedDevHandle);
@@ -6622,6 +6661,19 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
attached_handle, i, link_rate,
ioc->sas_hba.phy[i].port);
}
+ /*
+ * Clear the phy details if this phy got disabled as part of
+ * HBA Firmware upgrade/downgrade operation.
+ */
+ for (i = ioc->sas_hba.num_phys;
+ i < ioc->sas_hba.nr_phys_allocated; i++) {
+ if (ioc->sas_hba.phy[i].phy &&
+ ioc->sas_hba.phy[i].phy->negotiated_linkrate >=
+ SAS_LINK_RATE_1_5_GBPS)
+ mpt3sas_transport_update_links(ioc,
+ ioc->sas_hba.sas_address, 0, i,
+ MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED, NULL);
+ }
out:
kfree(sas_iounit_pg0);
}
@@ -6654,7 +6706,10 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
__FILE__, __LINE__, __func__);
return;
}
- ioc->sas_hba.phy = kcalloc(num_phys,
+
+ ioc->sas_hba.nr_phys_allocated = max_t(u8,
+ MPT_MAX_HBA_NUM_PHYS, num_phys);
+ ioc->sas_hba.phy = kcalloc(ioc->sas_hba.nr_phys_allocated,
sizeof(struct _sas_phy), GFP_KERNEL);
if (!ioc->sas_hba.phy) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",