[5.15,075/102] USB: serial: option: add Fibocom L610 modem

From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>

From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>

commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.

The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:

31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d10 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 33
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

Message ID	20220516193626.149169864@linuxfoundation.org
State	Superseded
Headers	show Return-Path: <stable-owner@kernel.org> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, stable@vger.kernel.org, Sven Schwermer <sven.schwermer@disruptive-technologies.com>, Johan Hovold <johan@kernel.org> Subject: [PATCH 5.15 075/102] USB: serial: option: add Fibocom L610 modem Date: Mon, 16 May 2022 21:36:49 +0200 Message-Id: <20220516193626.149169864@linuxfoundation.org> In-Reply-To: <20220516193623.989270214@linuxfoundation.org> References: <20220516193623.989270214@linuxfoundation.org> User-Agent: quilt/0.66 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	None \| expand [5.15,002/102] iwlwifi: iwl-dbg: Use del_timer_sync() before freeing [5.15,003/102] hwmon: (tmp401) Add OF device ID table [5.15,004/102] mac80211: Reset MBSSID parameters upon connection [5.15,005/102] net: Fix features skip in for_each_netdev_feature() [5.15,006/102] net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted [5.15,007/102] net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups [5.15,008/102] net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0 [5.15,009/102] net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters [5.15,010/102] fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove [5.15,011/102] fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove [5.15,012/102] fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove [5.15,013/102] platform/surface: aggregator: Fix initialization order when compiling as builtin m... [5.15,014/102] ice: Fix race during aux device (un)plugging [5.15,015/102] ice: fix PTP stale Tx timestamps cleanup [5.15,016/102] ipv4: drop dst in multicast routing path [5.15,017/102] drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() [5.15,018/102] netlink: do not reset transport header in netlink_recvmsg() [5.15,019/102] net: chelsio: cxgb4: Avoid potential negative array offset [5.15,020/102] fbdev: efifb: Fix a use-after-free due early fb_info cleanup [5.15,021/102] sfc: Use swap() instead of open coding it [5.15,022/102] net: sfc: fix memory leak due to ptp channel [5.15,023/102] mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection [5.15,024/102] nfs: fix broken handling of the softreval mount option [5.15,025/102] ionic: fix missing pci_release_regions() on error in ionic_probe() [5.15,026/102] dim: initialize all struct fields [5.15,027/102] hwmon: (ltq-cputemp) restrict it to SOC_XWAY [5.15,028/102] procfs: prevent unprivileged processes accessing fdinfo dir [5.15,029/102] selftests: vm: Makefile: rename TARGETS to VMTARGETS [5.15,030/102] arm64: vdso: fix makefile dependency on vdso.so [5.15,031/102] virtio: fix virtio transitional ids [5.15,032/102] s390/ctcm: fix variable dereferenced before check [5.15,033/102] s390/ctcm: fix potential memory leak [5.15,034/102] s390/lcs: fix variable dereferenced before check [5.15,035/102] net/sched: act_pedit: really ensure the skb is writable [5.15,036/102] net: ethernet: mediatek: ppe: fix wrong size passed to memset() [5.15,037/102] net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral [5.15,038/102] drm/vc4: hdmi: Fix build error for implicit function declaration [5.15,039/102] net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down() [5.15,040/102] net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending [5.15,041/102] net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() [5.15,042/102] tls: Fix context leak on tls_device_down [5.15,043/102] drm/vmwgfx: Fix fencing on SVGAv3 [5.15,044/102] gfs2: Fix filesystem block deallocation for short writes [5.15,045/102] hwmon: (f71882fg) Fix negative temperature [5.15,046/102] RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core() [5.15,047/102] iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu [5.15,048/102] ASoC: max98090: Reject invalid values in custom control put() [5.15,049/102] ASoC: max98090: Generate notifications on changes for custom control [5.15,050/102] ASoC: ops: Validate input values in snd_soc_put_volsw_range() [5.15,051/102] s390: disable -Warray-bounds [5.15,052/102] ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback [5.15,053/102] net: emaclite: Dont advertise 1000BASE-T and do auto negotiation [5.15,054/102] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT [5.15,055/102] secure_seq: use the 64 bits of the siphash for port offset calculation [5.15,056/102] tcp: use different parts of the port_offset for index and offset [5.15,057/102] tcp: resalt the secret every 10 seconds [5.15,058/102] tcp: add small random increments to the source port [5.15,059/102] tcp: dynamically allocate the perturb table used by source ports [5.15,060/102] tcp: increase source port perturb table to 2^16 [5.15,061/102] tcp: drop the hash_32() part from the index calculation [5.15,062/102] interconnect: Restore sync state by ignoring ipa-virt in provider count [5.15,063/102] firmware_loader: use kernel credentials when reading firmware [5.15,064/102] KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context() [5.15,065/102] usb: xhci-mtk: fix fs isocs transfer error [5.15,066/102] x86/mm: Fix marking of unused sub-pmd ranges [5.15,067/102] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe() [5.15,068/102] tty: n_gsm: fix buffer over-read in gsm_dlci_data() [5.15,069/102] tty: n_gsm: fix mux activation issues in gsm_config() [5.15,070/102] usb: cdc-wdm: fix reading stuck on device close [5.15,071/102] usb: typec: tcpci: Dont skip cleanup in .remove() on error [5.15,072/102] usb: typec: tcpci_mt6360: Update for BMC PHY setting [5.15,073/102] USB: serial: pl2303: add device id for HP LM930 Display [5.15,074/102] USB: serial: qcserial: add support for Sierra Wireless EM7590 [5.15,075/102] USB: serial: option: add Fibocom L610 modem [5.15,076/102] USB: serial: option: add Fibocom MA510 modem [5.15,077/102] slimbus: qcom: Fix IRQ check in qcom_slim_probe [5.15,078/102] fsl_lpuart: Dont enable interrupts too early [5.15,079/102] serial: 8250_mtk: Fix UART_EFR register address [5.15,080/102] serial: 8250_mtk: Fix register address for XON/XOFF character [5.15,081/102] ceph: fix setting of xattrs on async created inodes [5.15,082/102] Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()" [5.15,083/102] mm/huge_memory: do not overkill when splitting huge_zero_page [5.15,084/102] drm/vmwgfx: Disable command buffers on svga3 without gbobjects [5.15,085/102] drm/nouveau/tegra: Stop using iommu_present() [5.15,086/102] i40e: i40e_main: fix a missing check on list iterator [5.15,087/102] net: atlantic: always deep reset on pm op, fixing up my null deref regression [5.15,088/102] net: phy: Fix race condition on link status change [5.15,089/102] writeback: Avoid skipping inode writeback [5.15,090/102] cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp() [5.15,091/102] arm[64]/memremap: dont abuse pfn_valid() to ensure presence of linear map [5.15,092/102] net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061 [5.15,093/102] net: phy: micrel: Pass .probe for KS8737 [5.15,094/102] SUNRPC: Ensure that the gssproxy client can start in a connected state [5.15,095/102] drm/vmwgfx: Initialize drm_mode_fb_cmd2 [5.15,096/102] Revert "drm/amd/pm: keep the BACO feature enabled for suspend" [5.15,097/102] dma-buf: call dma_buf_stats_setup after dmabuf is in valid list [5.15,098/102] mm/hwpoison: use pr_err() instead of dump_page() in get_any_page() [5.15,099/102] SUNRPC: Ensure we flush any closed sockets before xs_xprt_free() [5.15,100/102] ping: fix address binding wrt vrf [5.15,101/102] usb: gadget: uvc: rename function to be more consistent [5.15,102/102] usb: gadget: uvc: allow for application to cleanly shutdown

[5.15,075/102] USB: serial: option: add Fibocom L610 modem

Commit Message

Patch