From patchwork Sun May 17 08:32:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 245905 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Sun, 17 May 2020 14:02:54 +0530 Subject: [PATCH v1 0/3] add elog support for broadcom NS3 soc Message-ID: <20200517083257.22191-1-rayagonda.kokatanur@broadcom.com> This is fifth patch set series prepared on top of fourth patch set ("add optee support for broadcom NS3 soc"). This patch adds support for error logging and corresponding command. Sheetal Tigadoli (1): common: ns3: add error logging support Vladimir Olovyannikov (2): board: ns3: kconfig: extend board kconfig with specific commands cmd: bcm: add broadcom error log setup command board/broadcom/bcmns3/Kconfig | 5 + cmd/Kconfig | 2 + cmd/Makefile | 2 + cmd/bcm/Kconfig | 12 + cmd/bcm/Makefile | 4 + cmd/bcm/elog.h | 64 +++++ cmd/bcm/logsetup.c | 432 ++++++++++++++++++++++++++++++++++ common/Kconfig | 8 + common/Makefile | 1 + common/bcm_elog.c | 49 ++++ common/console.c | 22 ++ configs/bcm_ns3_defconfig | 1 + include/bcm_elog.h | 37 +++ 13 files changed, 639 insertions(+) create mode 100644 cmd/bcm/Kconfig create mode 100644 cmd/bcm/Makefile create mode 100644 cmd/bcm/elog.h create mode 100644 cmd/bcm/logsetup.c create mode 100644 common/bcm_elog.c create mode 100644 include/bcm_elog.h