From patchwork Sun May 24 10:24:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 246376 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Sun, 24 May 2020 15:54:16 +0530 Subject: [PATCH v2 0/3] add optee support for broadcom NS3 soc Message-ID: <20200524102419.5568-1-rayagonda.kokatanur@broadcom.com> This is fourth patch set series prepared on top of third patch set ("add FIT image support for broadcom NS3 soc"). This patch adds optee support. Changes from v1: -Address review comments from Thomas Fitzsimmons, Expand the bnxt full form. -Address review comments from Simon Glass, Move c file from board/broadcom/bcmns3/chimp_optee.c to drivers/tee/broadcom, Move header file from include/brcm/chimp.h to include/broadcom/chimp.h Vikas Gupta (3): board: ns3: add optee based bnxt fw load driver configs: ns3: enable tee and optee driver arm: dts: ns3: add optee node arch/arm/dts/ns3.dtsi | 7 ++ configs/bcm_ns3_defconfig | 5 +- drivers/tee/Kconfig | 1 + drivers/tee/Makefile | 1 + drivers/tee/broadcom/Kconfig | 7 ++ drivers/tee/broadcom/Makefile | 3 + drivers/tee/broadcom/chimp_optee.c | 154 +++++++++++++++++++++++++++++ include/broadcom/chimp.h | 40 ++++++++ 8 files changed, 217 insertions(+), 1 deletion(-) create mode 100644 drivers/tee/broadcom/Kconfig create mode 100644 drivers/tee/broadcom/Makefile create mode 100644 drivers/tee/broadcom/chimp_optee.c create mode 100644 include/broadcom/chimp.h