Show patches with: State = Action Required       |   6295 patches
« 1 2 ... 60 61 62 63 »
Patch Series S/W/F Date Submitter Delegate State
[2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4 --- 2012-05-25 Rajeshwari Shinde New
[1/4] EXYNOS: MSHCI: Add clock for EXYNOS5 --- 2012-05-25 Rajeshwari Shinde New
MMC: MSHCI: Add MSHCI driver --- 2012-05-25 Rajeshwari Shinde New
[2/2,V2] PMIC: SMDK5250: Enable MAX77686 pmic chip --- 2012-05-23 Rajeshwari Shinde New
[2/2,V2] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-05-23 Rajeshwari Shinde New
PMIC: MAX77686: Add support for MAX77686 --- 2012-05-21 Rajeshwari Shinde New
[8/8] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-05-18 Rajeshwari Shinde New
[7/8] I2C: Add support for Multi channel --- 2012-05-18 Rajeshwari Shinde New
[6/8] I2C: Modify the I2C driver for EXYNOS5 --- 2012-05-18 Rajeshwari Shinde New
[5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-05-18 Rajeshwari Shinde New
[3/8] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-05-18 Rajeshwari Shinde New
[2/8] EXYNOS: Add I2C base address. --- 2012-05-18 Rajeshwari Shinde New
[1/8] EXYNOS: CLK: Add i2c clock --- 2012-05-18 Rajeshwari Shinde New
[4/6,V3] EXYNOS: Add power Enable/Disable for USB-EHCI --- 2012-05-08 Rajeshwari Shinde New
[4/6,V2] Exynos5: Add power Enable/Disable for USB-EHCI --- 2012-05-04 Rajeshwari Shinde New
[3/6,V2] EXYNOS5 : USB: Set USB 2.0 HOST Link mode --- 2012-05-04 Rajeshwari Shinde New
[V3] USB: EXYNOS: Add ehci support --- 2012-05-04 Rajeshwari Shinde New
[2/2] exynos: smdk5250: Enable the pinmux setup --- 2012-05-04 Rajeshwari Shinde New
[1/2] exynos5: pinmux: Added default pinumx settings --- 2012-05-04 Rajeshwari Shinde New
[5/5] exynos5: usb: Enable USB 2.0 on smdk5250 --- 2012-05-02 Rajeshwari Shinde New
[4/5] exynos5: usb: Fix incorrect USB base addresses --- 2012-05-02 Rajeshwari Shinde New
[3/5] exynos5: Add power Enable/Disable for USB-EHCI --- 2012-05-02 Rajeshwari Shinde New
[1/5] exynos5: Add system register structure --- 2012-05-02 Rajeshwari Shinde New
USB: S5P: Add ehci support --- 2012-05-01 Rajeshwari Shinde New
USB: S5P: Add ehci support --- 2012-04-30 Rajeshwari Shinde New
USB: S5P: Add ehci support --- 2012-04-30 Rajeshwari Shinde New
[1/1] arm: vexpress: Fixed get_ticks/get_tbclk build failures --- 2012-03-06 matt.waddel@linaro.org New
[3/3] i.mx6q: arm2: Add the enet function support --- 2011-12-13 Jason Hui New
[V2,1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board --- 2011-12-13 Jason Hui New
i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board --- 2011-12-05 Jason Hui New
[V3,1/5] i.mx: introduce the armv7/imx-common folder --- 2011-11-25 Jason Hui New
[V2,6/6] i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board --- 2011-11-18 Jason Hui New
[V2,4/6] i.mx: serial_mxc: add the i.mx6q support --- 2011-11-18 Jason Hui New
[V2,2/6] i.mx: add the initial support for freescale i.MX6Q processor --- 2011-11-18 Jason Hui New
[V2,1/6] i.mx: introduce the armv7/imx-common folder --- 2011-11-18 Jason Hui New
[6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board --- 2011-11-12 Jason Hui New
[5/6] i.mx: fsl_esdhc: add the i.mx6q support --- 2011-11-12 Jason Hui New
[4/6] i.mx: serial_mxc: add the i.mx6q support --- 2011-11-12 Jason Hui New
[2/6] i.mx: Add the initial support for freescale i.MX6Q processor --- 2011-11-12 Jason Hui New
[1/6] i.mx: i.mx5: Move some files to imx-common folder --- 2011-11-12 Jason Hui New
[2/2] Build u-boot.kwb by default when board uses it --- 2011-11-10 loic.minier@linaro.org New
[1/2] Build u-boot.imx by default when board uses it --- 2011-11-10 loic.minier@linaro.org New
mx53: use CONFIG_SYS_L2CACHE_OFF in config file --- 2011-07-26 Jason Hui New
mx53: use CONFIG_SYS_L2CACHE_OFF in config file --- 2011-07-26 Jason Hui New
[V7,3/3] MX53: support for freescale MX53LOCO board --- 2011-05-11 Jason Hui New
[V7,2/3] PMIC: Add dialog pmic support --- 2011-05-11 Jason Hui New
[V7,1/3] MX5: clock: Add clock config interface --- 2011-05-11 Jason Hui New
[1/2] Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition --- 2011-04-28 Shawn Guo New
[V6,3/3] MX53: support for freescale MX53LOCO board --- 2011-04-22 Jason Hui New
[V6,2/3] PMIC: Add dialog pmic support --- 2011-04-22 Jason Hui New
[V6,1/3] MX5: clock: Add clock config interface --- 2011-04-22 Jason Hui New
[V5,2/2] MX53: support for freescale MX53LOCO board --- 2011-04-20 Jason Hui New
[1/1] mx5: drop boot cause code from board support code --- 2011-04-20 Jason Hui New
[PATCHv4,4/4] armv7: Add support for ST-Ericsson U8500 href platform --- 2011-04-19 John Rigby New
[PATCHv2,2/2] mmc: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon --- 2011-04-18 John Rigby New
[PATCHv2,1/2] MMC: make b_max unconditional --- 2011-04-18 John Rigby New
[PATCHv2] MMC: disable multiblock rw on old rev OMAP3 silicon --- 2011-04-14 John Rigby New
[2/2] MX53: loco: Add power init support --- 2011-04-13 Jason Hui New
[1/2] PMIC: Add dialog pmic support --- 2011-04-13 Jason Hui New
[1/1] MX5: clock: Add clock config interface --- 2011-04-13 Jason Hui New
[V1,1/1] MX5: Keep L2 cache enabled before jump to kernel --- 2011-04-13 Jason Hui New
[PATCHv3,4/4] armv7: Add support for ST-Ericsson U8500 href platform --- 2011-04-12 John Rigby New
[PATCHv3,2/4] armv7: Add ST-Ericsson u8500 arch --- 2011-04-12 John Rigby New
[PATCHv3,1/4] Serial: p1011: new vendor init options --- 2011-04-12 John Rigby New
[v2] MX5: Enable flat-device-tree support on mx53 loco board --- 2011-03-29 Jason Hui New
MX5: Enable flat-device-tree support on mx53 loco board --- 2011-03-29 Jason Hui New
[3/4] I2C: add driver of st-ericsson u8500 i2c --- 2011-03-22 John Rigby New
[2/4] armv7: Add ST-Ericsson u8500 arch --- 2011-03-22 John Rigby New
[1/4] p101x: extra init for u8500 --- 2011-03-22 John Rigby New
mx53loco: set mmc env to MMC slot1 --- 2011-03-22 Jason Hui New
[Vx,1/1] mx53loco: set mmc env to MMC slot1 --- 2011-03-22 Jason Hui New
[22/22] omap4: add spl support for OMAP4 Panda --- 2011-02-28 Aneesh V New
[21/22] omap: spl: add FAT support over MMC --- 2011-02-28 Aneesh V New
[20/22] omap: add MMC support to SPL --- 2011-02-28 Aneesh V New
[19/22] armv7: embed u-boot size within u-boot for use from SPL --- 2011-02-28 Aneesh V New
[18/22] omap4: automatic sdram detection --- 2011-02-28 Aneesh V New
[17/22] omap4: calculate EMIF register values --- 2011-02-28 Aneesh V New
[16/22] omap4: add sdram init support --- 2011-02-28 Aneesh V New
[15/22] omap4: add clock support --- 2011-02-28 Aneesh V New
[14/22] omap4: correct mux data for sdp4430 --- 2011-02-28 Aneesh V New
[13/22] omap4: separate mux settings into essential and non essential parts --- 2011-02-28 Aneesh V New
[12/22] omap4: utility function to identify the context of hw init --- 2011-02-28 Aneesh V New
[11/22] omap4: add serial console support to SPL --- 2011-02-28 Aneesh V New
[10/22] omap4: add spl support for OMAP4 SDP --- 2011-02-28 Aneesh V New
[09/22] omap: add spl support --- 2011-02-28 Aneesh V New
[08/22] armv7: start.S: add SPL support --- 2011-02-28 Aneesh V New
[07/22] Add generic spl infrastructure --- 2011-02-28 Aneesh V New
[06/22] arm: new labels in the linker script file --- 2011-02-28 Aneesh V New
[05/22] omap4: save parameters passed by ROM code to SPL --- 2011-02-28 Aneesh V New
[04/22] armv7: start.S: provide a hook for saving boot params --- 2011-02-28 Aneesh V New
[03/22] omap4: add OMAP4430 revision check --- 2011-02-28 Aneesh V New
[02/22] omap: add miscellaneous utility macros for bit-field operations --- 2011-02-28 Aneesh V New
[01/22] mkimage: Add OMAP boot image support --- 2011-02-28 Aneesh V New
[V2,1/1] MX53: support for freescale MX53LOCO board --- 2011-02-23 Jason Liu New
« 1 2 ... 60 61 62 63 »