Show patches with: Submitter = Bryan O'Donoghue       |    State = Action Required       |   38 patches
Patch Series S/W/F Date Submitter Delegate State
[RESEND,v3,3/8] arm: imx7s-warp: Add DT file hooks Convert i.MX7 WaRP7 ports to DM --- 2019-01-18 Bryan O'Donoghue New
cmd: image_info: Add checking of default FIT config cmd: image_info: Add checking of default FIT config --- 2019-01-18 Bryan O'Donoghue New
[6/8] warp7: defconfig: Switch on DM GPIO for both warp7 ports Convert i.MX7 WaRP7 ports to DM --- 2019-01-03 Bryan O'Donoghue New
[4/4] warp7: configs: add bl33 defconfig Add WaRP7 ATF chainloaded setup --- 2018-09-05 Bryan O'Donoghue New
[3/4] warp7: include: configs: set skip low level init Add WaRP7 ATF chainloaded setup --- 2018-09-05 Bryan O'Donoghue New
[2/4] optee: adjust dependencies and default values for dram Add WaRP7 ATF chainloaded setup --- 2018-09-05 Bryan O'Donoghue New
[1/4] imx: mx7: avoid some initialization if low level is skipped Add WaRP7 ATF chainloaded setup --- 2018-09-05 Bryan O'Donoghue New
[v4,09/18] warp7: defconfig: Enable CONFIG_SECURE_BOOT warp7: Enable automated OPTEE/HAB boot flow --- 2018-04-24 Bryan O'Donoghue New
[v5,3/3] warp7: configs: enable CONFIG_CMD_FS_GENERIC WaRP7 unify secure and non-secure defconfigs --- 2018-04-24 Bryan O'Donoghue New
[v4,2/3] warp7: secure_defconfig: Remove secure_defconfig WaRP7 unify secure and non-secure defconfigs --- 2018-04-24 Bryan O'Donoghue New
[v2,2/2] warp7: secure_defconfig: Remove secure_defconfig WaRP7 unify secure and non-secure defconfigs --- 2018-03-31 Bryan O'Donoghue New
[18/18] warp7: Add support for automated secure boot.scr verification warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[17/18] warp7_secure: defconfig: Enable CMD_SETEXPR warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[16/18] warp7: hab: Set environment variable indicating IVT offset warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[15/18] warp7: Make load command an environment variable warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[07/18] warp7: Specify CONFIG_OPTEE_LOAD_ADDR warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[04/18] warp7: defconfig: Enable OPTEE for WaRP7 warp7: Enable automated OPTEE/HAB boot flow --- 2018-03-30 Bryan O'Donoghue New
[2/2] warp7: usb: Set u-boot serial# based on OTP value NXP WaARP7 set serial# from OTP fuses for USB iSerial --- 2018-03-13 Bryan O'Donoghue New
[1/2] warp7: usb: Introduce a get method for serial number NXP WaARP7 set serial# from OTP fuses for USB iSerial --- 2018-03-13 Bryan O'Donoghue New
[4/4] imx: hab: Provide hab_auth_img_or_fail command imx: hab: Add helper functions for scripted HAB auth --- 2018-03-09 Bryan O'Donoghue New
[3/4] imx: hab: Specify IVT padding size imx: hab: Add helper functions for scripted HAB auth --- 2018-03-09 Bryan O'Donoghue New
[2/4] imx: hab: Encase majority of header in __ASSEMBLY__ declaration imx: hab: Add helper functions for scripted HAB auth --- 2018-03-09 Bryan O'Donoghue New
[1/4] imx: hab: Add routine to set HAB IVT address imx: hab: Add helper functions for scripted HAB auth --- 2018-03-09 Bryan O'Donoghue New
[v4,11/12] bootm: optee: Add mechanism to validate a bootable TEE image Add new OPTEE bootm support to u-boot --- 2018-02-26 Bryan O'Donoghue New
[v4,08/12] doc: TEE: Add documentation describing TEE in u-boot Add new OPTEE bootm support to u-boot --- 2018-02-26 Bryan O'Donoghue New
[v4,07/12] tools: mkimage: add tee-bootable image type Add new OPTEE bootm support to u-boot --- 2018-02-26 Bryan O'Donoghue New
[v4,06/12] image: Update comment for IH_TYPE_TEE Add new OPTEE bootm support to u-boot --- 2018-02-26 Bryan O'Donoghue New
[RESEND,v3,2/2] imx: mx7: run sec_init for CAAM RNG Fix CAAM for TrustZone enable for warp7 --- 2018-01-26 Bryan O'Donoghue New
[v2,2/2] warp7 : run sec_init for CAAM RNG Fix CAAM for TrustZone enable for warp7 --- 2018-01-26 Bryan O'Donoghue New
[v2,8/9] optee: Improve error printout Add new OPTEE bootm support to u-boot --- 2018-01-19 Bryan O'Donoghue New
[v2,7/9] optee: Add optee_verify_bootm_image() Add new OPTEE bootm support to u-boot --- 2018-01-19 Bryan O'Donoghue New
[8/9] optee: Improve error printout Add new OPTEE bootm support to u-boot --- 2018-01-12 Bryan O'Donoghue New
[7/9] optee: Add optee_verify_bootm_image() Add new OPTEE bootm support to u-boot --- 2018-01-12 Bryan O'Donoghue New
[3/9] optee: Make OPTEE_TZDRAM_BASE a mandatory define Add new OPTEE bootm support to u-boot --- 2018-01-12 Bryan O'Donoghue New
[v4,08/25] arm: imx: hab: Fix authenticate image lockup on MX7 Fix and extend i.MX HAB layer --- 2018-01-02 Bryan O'Donoghue New
[20/23] arm: imx: hab: Make imx_hab_is_enabled global Fix and extend i.MX HAB layer --- 2017-12-27 Bryan O'Donoghue New
[19/23] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled Fix and extend i.MX HAB layer --- 2017-12-27 Bryan O'Donoghue New
[10/23] arm: imx: hab: Add IVT header verification Fix and extend i.MX HAB layer --- 2017-12-27 Bryan O'Donoghue New