Show patches with: none      |   20173 patches
« 1 2 ... 198 199 200201 202 »
Patch Series S/W/F Date Submitter Delegate State
[05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[04/10,V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[03/10,V4] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-29 Rajeshwari Shinde Superseded
[02/10,V4] SMDK5250: SPL: Define parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[01/10,V4] ARCH: SPL: Add parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[10/10,V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[09/10,V3] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[08/10,V3] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[07/10,V3] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[06/10,V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[04/10,V3] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[03/10,V3] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-29 Rajeshwari Shinde Superseded
[02/10,V3] SMDK5250: SPL: Define parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[01/10,V3] ARCH: SPL: Add parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[9/9,V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde Superseded
[8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9,V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[3/9,V2] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-20 Rajeshwari Shinde Superseded
[2/9,V2] SMDK5250: SPL: Define parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[1/9,V2] ARCH: SPL: Add parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde Superseded
[8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[3/9] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-20 Rajeshwari Shinde Superseded
[2/9] SMDK5250: SPL: Define parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[1/9] ARCH: SPL: Add parametric board initializer --- 2012-06-20 Rajeshwari Shinde New
[8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V4] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V4] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[4/8,V4] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-19 Rajeshwari Shinde Superseded
[3/8,V4] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-19 Rajeshwari Shinde Superseded
[2/8,V4] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V4] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V3] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V3] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[4/8,V3] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-19 Rajeshwari Shinde Superseded
[3/8,V3] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-19 Rajeshwari Shinde Superseded
[2/8,V3] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V3] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[11/11] snowball: Adding board specific cache cleanup routine --- 2012-06-18 Mathieu Poirier New
[10/11] armv7: Adding cpu specific cache managmenent --- 2012-06-18 Mathieu Poirier New
[09/11] u8500: Separating mmc config parameters from driver --- 2012-06-18 Mathieu Poirier Accepted
[08/11] u8500: Enabling power to MMC device on AB8500 V2 --- 2012-06-18 Mathieu Poirier Accepted
[07/11] u8500: Moving processor-specific functions to cpu area. --- 2012-06-18 Mathieu Poirier Accepted
[06/11] snowball: applying power to LAN and GBF controllers --- 2012-06-18 Mathieu Poirier Accepted
[05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access --- 2012-06-18 Mathieu Poirier Accepted
[04/11] snowball: Adding CPU clock initialisation --- 2012-06-18 Mathieu Poirier Accepted
[03/11] snowball: Adding architecture dependent initialisation --- 2012-06-18 Mathieu Poirier Accepted
[02/11] u8500: Moving prcmu to cpu directory --- 2012-06-18 Mathieu Poirier New
[01/11] snowball: Add support for ux500 based snowball board --- 2012-06-18 Mathieu Poirier Accepted
[11/11] snowball: Adding board specific cache cleanup routine --- 2012-06-18 Mathieu Poirier New
[10/11] armv7: Adding cpu specific cache managmenent --- 2012-06-18 Mathieu Poirier New
[09/11] u8500: Separating mmc config parameters from driver --- 2012-06-18 Mathieu Poirier Superseded
[08/11] u8500: Enabling power to MMC device on AB8500 V2 --- 2012-06-18 Mathieu Poirier Superseded
[07/11] u8500: Moving processor-specific functions to cpu area. --- 2012-06-18 Mathieu Poirier Superseded
[06/11] snowball: applying power to LAN and GBF controllers --- 2012-06-18 Mathieu Poirier Superseded
[05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access --- 2012-06-18 Mathieu Poirier Superseded
[04/11] snowball: Adding CPU clock initialisation --- 2012-06-18 Mathieu Poirier Superseded
[03/11] snowball: Adding architecture dependent initialisation --- 2012-06-18 Mathieu Poirier Superseded
[02/11] u8500: Moving prcmu to cpu directory --- 2012-06-18 Mathieu Poirier New
[01/11] snowball: Add support for ux500 based snowball board --- 2012-06-18 Mathieu Poirier Superseded
[V2] MMC: DWMMC: Add DWMMC driver --- 2012-06-11 Rajeshwari Shinde New
[8/8,V2] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-07 Rajeshwari Shinde New
[7/8,V2] I2C: Add support for Multi channel --- 2012-06-07 Rajeshwari Shinde New
[6/8,V2] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-07 Rajeshwari Shinde New
[5/8,V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-07 Rajeshwari Shinde New
[4/8,V2] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-07 Rajeshwari Shinde Superseded
[3/8,V2] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-07 Rajeshwari Shinde Superseded
[2/8,V2] EXYNOS: Add I2C base address. --- 2012-06-07 Rajeshwari Shinde New
[1/8,V2] EXYNOS: CLK: Add i2c clock --- 2012-06-07 Rajeshwari Shinde New
[2/2,V6] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-07 Rajeshwari Shinde Accepted
[1/2,V6] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-07 Rajeshwari Shinde Accepted
[2/2,V5] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-05 Rajeshwari Shinde Superseded
[1/2,V5] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-05 Rajeshwari Shinde New
[2/2,V4] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V4] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[2/2,V3] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V3] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[4/4] EXYNOS5: Enable support for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[3/4] EXYNOS: Add base address for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4 --- 2012-05-25 Rajeshwari Shinde New
[1/4] EXYNOS: MSHCI: Add clock for EXYNOS5 --- 2012-05-25 Rajeshwari Shinde New
MMC: MSHCI: Add MSHCI driver --- 2012-05-25 Rajeshwari Shinde New
[2/2,V2] PMIC: SMDK5250: Enable MAX77686 pmic chip --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] PMIC: MAX77686: Add support for MAX77686 --- 2012-05-23 Rajeshwari Shinde Superseded
[2/2,V2] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-05-23 Rajeshwari Shinde New
integrator: break out common config --- 2012-05-22 Linus Walleij Accepted
PMIC: MAX77686: Add support for MAX77686 --- 2012-05-21 Rajeshwari Shinde New
USB: EXYNOS: Incorporate EHCI review comments --- 2012-05-21 Rajeshwari Shinde Accepted
« 1 2 ... 198 199 200201 202 »