Show patches with: Submitter = Rajeshwari Shinde       |   622 patches
« 1 2 ... 4 5 6 7 »
Patch Series S/W/F Date Submitter Delegate State
[02/10,V5] SMDK5250: SPL: Define parametric board initializer --- 2012-07-02 Rajeshwari Shinde Superseded
[01/10,V5] ARCH: SPL: Add parametric board initializer --- 2012-07-02 Rajeshwari Shinde Superseded
[10/10,V4] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[09/10,V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[08/10,V4] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[07/10,V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[06/10,V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[04/10,V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[03/10,V4] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-29 Rajeshwari Shinde Superseded
[02/10,V4] SMDK5250: SPL: Define parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[01/10,V4] ARCH: SPL: Add parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[10/10,V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[09/10,V3] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[08/10,V3] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[07/10,V3] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[06/10,V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[04/10,V3] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[03/10,V3] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-29 Rajeshwari Shinde Superseded
[02/10,V3] SMDK5250: SPL: Define parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[01/10,V3] ARCH: SPL: Add parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
[9/9,V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde Superseded
[8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9,V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[3/9,V2] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-20 Rajeshwari Shinde Superseded
[2/9,V2] SMDK5250: SPL: Define parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[1/9,V2] ARCH: SPL: Add parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde Superseded
[8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[3/9] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-20 Rajeshwari Shinde Superseded
[2/9] SMDK5250: SPL: Define parametric board initializer --- 2012-06-20 Rajeshwari Shinde Superseded
[1/9] ARCH: SPL: Add parametric board initializer --- 2012-06-20 Rajeshwari Shinde New
[8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V4] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V4] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[4/8,V4] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-19 Rajeshwari Shinde Superseded
[3/8,V4] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-19 Rajeshwari Shinde Superseded
[2/8,V4] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V4] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V3] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V3] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[4/8,V3] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-19 Rajeshwari Shinde Superseded
[3/8,V3] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-19 Rajeshwari Shinde Superseded
[2/8,V3] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V3] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[V2] MMC: DWMMC: Add DWMMC driver --- 2012-06-11 Rajeshwari Shinde New
[8/8,V2] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-07 Rajeshwari Shinde New
[7/8,V2] I2C: Add support for Multi channel --- 2012-06-07 Rajeshwari Shinde New
[6/8,V2] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-07 Rajeshwari Shinde New
[5/8,V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-07 Rajeshwari Shinde New
[4/8,V2] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-07 Rajeshwari Shinde Superseded
[3/8,V2] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-07 Rajeshwari Shinde Superseded
[2/8,V2] EXYNOS: Add I2C base address. --- 2012-06-07 Rajeshwari Shinde New
[1/8,V2] EXYNOS: CLK: Add i2c clock --- 2012-06-07 Rajeshwari Shinde New
[2/2,V6] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-07 Rajeshwari Shinde Accepted
[1/2,V6] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-07 Rajeshwari Shinde Accepted
[2/2,V5] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-05 Rajeshwari Shinde Superseded
[1/2,V5] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-05 Rajeshwari Shinde New
[2/2,V4] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V4] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[2/2,V3] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V3] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[4/4] EXYNOS5: Enable support for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[3/4] EXYNOS: Add base address for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4 --- 2012-05-25 Rajeshwari Shinde New
[1/4] EXYNOS: MSHCI: Add clock for EXYNOS5 --- 2012-05-25 Rajeshwari Shinde New
MMC: MSHCI: Add MSHCI driver --- 2012-05-25 Rajeshwari Shinde New
[2/2,V2] PMIC: SMDK5250: Enable MAX77686 pmic chip --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] PMIC: MAX77686: Add support for MAX77686 --- 2012-05-23 Rajeshwari Shinde Superseded
[2/2,V2] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-05-23 Rajeshwari Shinde New
PMIC: MAX77686: Add support for MAX77686 --- 2012-05-21 Rajeshwari Shinde New
USB: EXYNOS: Incorporate EHCI review comments --- 2012-05-21 Rajeshwari Shinde Accepted
[8/8] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-05-18 Rajeshwari Shinde New
[7/8] I2C: Add support for Multi channel --- 2012-05-18 Rajeshwari Shinde New
[6/8] I2C: Modify the I2C driver for EXYNOS5 --- 2012-05-18 Rajeshwari Shinde New
[5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-05-18 Rajeshwari Shinde New
[4/8] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-05-18 Rajeshwari Shinde Superseded
[3/8] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-05-18 Rajeshwari Shinde New
[2/8] EXYNOS: Add I2C base address. --- 2012-05-18 Rajeshwari Shinde New
[1/8] EXYNOS: CLK: Add i2c clock --- 2012-05-18 Rajeshwari Shinde New
[6/6,V4] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250 --- 2012-05-14 Rajeshwari Shinde Accepted
[5/6,V4] EXYNOS5: USB: Fix incorrect USB base addresses --- 2012-05-14 Rajeshwari Shinde Accepted
[4/6,V4] EXYNOS: Add power Enable/Disable for USB-EHCI --- 2012-05-14 Rajeshwari Shinde Accepted
[3/6,V4] USB: EXYNOS: Set USB 2.0 HOST Link mode --- 2012-05-14 Rajeshwari Shinde Accepted
[2/6,V4] EXYNOS5: Add structure for PMU registers --- 2012-05-14 Rajeshwari Shinde Accepted
[1/6,V4] EXYNOS5: Fix system register structure --- 2012-05-14 Rajeshwari Shinde Accepted
[6/6,V3] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250 --- 2012-05-08 Rajeshwari Shinde Superseded
[5/6,V3] EXYNOS5: USB: Fix incorrect USB base addresses --- 2012-05-08 Rajeshwari Shinde Superseded
« 1 2 ... 4 5 6 7 »