From patchwork Tue Aug 14 05:45:24 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajeshwari Shinde X-Patchwork-Id: 10715 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id 3934923E02 for ; Tue, 14 Aug 2012 05:40:39 +0000 (UTC) Received: from mail-gh0-f180.google.com (mail-gh0-f180.google.com [209.85.160.180]) by fiordland.canonical.com (Postfix) with ESMTP id CB487A18960 for ; Tue, 14 Aug 2012 05:40:38 +0000 (UTC) Received: by ghbg10 with SMTP id g10so10893ghb.11 for ; Mon, 13 Aug 2012 22:40:38 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-forwarded-to:x-forwarded-for:delivered-to:received-spf:x-auditid :from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references :x-brightmail-tracker:x-tm-as-mml:x-gm-message-state; bh=Gy2f6DX2SXq2H3t3InN7NzCF0a9xuRDRVj39MuE8D5s=; b=LfpSjModHlHuV/9j/ievbwy6aevcA8J9dZwXIdTLdQC4iGi8yOW9Ug69Zn8S1yTwWV 4ahaNEpatfQw8l4M2xxOpUxUy/uP+CXogIqI9OeIIkdJo6bc6c3JWRyHswQCA+oOlmME 3UN661Y5mpknAeRzXtxNmcYudGWLpL3lLwdO/GNQGJ5pHFkTtt/6JSYOMqmuM/F4RT/0 qXxRkK9DJHqQScTKErzravez13E0rXsaFgHUchbXsuJ0+XpH/1oZUucTOK4AZ+hWBg7d n6/YeuObUrlGVCP1GHmvXlH+kvkh5PYvlCOGdHQ2rYQQa8rnrRCG2WTYtWqXmp2tZrmr mU6A== Received: by 10.50.6.229 with SMTP id e5mr9691287iga.9.1344922837856; Mon, 13 Aug 2012 22:40:37 -0700 (PDT) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.50.184.200 with SMTP id ew8csp214450igc; Mon, 13 Aug 2012 22:40:37 -0700 (PDT) Received: by 10.66.77.71 with SMTP id q7mr19928035paw.0.1344922836947; Mon, 13 Aug 2012 22:40:36 -0700 (PDT) Received: from mailout3.samsung.com (mailout3.samsung.com. [203.254.224.33]) by mx.google.com with ESMTP id op6si2450249pbc.144.2012.08.13.22.40.36; Mon, 13 Aug 2012 22:40:36 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of rajeshwari.s@samsung.com designates 203.254.224.33 as permitted sender) client-ip=203.254.224.33; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of rajeshwari.s@samsung.com designates 203.254.224.33 as permitted sender) smtp.mail=rajeshwari.s@samsung.com Received: from epcpsbgm2.samsung.com (mailout3.samsung.com [203.254.224.33]) by mailout3.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0M8Q00EETD2NOTA0@mailout3.samsung.com>; Tue, 14 Aug 2012 14:40:35 +0900 (KST) X-AuditID: cbfee61b-b7faf6d00000476a-05-5029e4d33ebd Received: from epmmp1.local.host ( [203.254.227.16]) by epcpsbgm2.samsung.com (EPCPMTA) with SMTP id FB.22.18282.3D4E9205; Tue, 14 Aug 2012 14:40:35 +0900 (KST) Received: from rajeshwari-linux.sisodomain.com ([107.108.215.115]) by mmp1.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0M8Q00064D2QKU20@mmp1.samsung.com>; Tue, 14 Aug 2012 14:40:35 +0900 (KST) From: Rajeshwari Shinde To: u-boot@lists.denx.de Cc: patches@linaro.org, alim.akhtar@samsung.com, sjg@chromium.org, mk7.kang@samsung.com, chander.kashyap@linaro.org Subject: [PATCH 1/9] SOUND: Add I2S driver Date: Tue, 14 Aug 2012 11:15:24 +0530 Message-id: <1344923132-31803-2-git-send-email-rajeshwari.s@samsung.com> X-Mailer: git-send-email 1.7.4.4 In-reply-to: <1344923132-31803-1-git-send-email-rajeshwari.s@samsung.com> References: <1344923132-31803-1-git-send-email-rajeshwari.s@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrJJMWRmVeSWpSXmKPExsVy+t9jAd3LTzQDDDqviFs8XH+TxWLK4S8s Dkwed67tYQtgjOKySUnNySxLLdK3S+DK6L68gLFgy37Gio9vL7A3MP6cztjFyMkhIWAice9Q C5QtJnHh3nq2LkYuDiGBRYwSt6a0MEE4E5kkrr+Zzw5SxSZgJLH15DSwDhEBCYlf/VeBbA4O ZoFSiSkT80DCwgJaEh8mfmEGsVkEVCV+LVzPBGLzCnhInPm8iAVimYLEsalfWUFsTgFPiVvX l4GNFAKqWf/uDOMERt4FjAyrGEVTC5ILipPSc430ihNzi0vz0vWS83M3MYID4Jn0DsZVDRaH GAU4GJV4eAsTNQOEWBPLiitzDzFKcDArifDe7wEK8aYkVlalFuXHF5XmpBYfYpTmYFES5zXx /uovJJCeWJKanZpakFoEk2Xi4JRqYMy3veyUEn1hTVrL5+OPZ+0JyebbwKi2uG0ll215VlTk vrAZN+23zzqdxvCc4615Rf6HurW22S8PBH9PXrfb0Wkti/C6tVpL579rZ6mzvdknc+qi/H8R huXchZNkT75foHIyoSq848W75jwxj0bbH7NOevP4z99iwepSv1Yl56lz/DbTc99uCyixFGck GmoxFxUnAgCAr5wR/AEAAA== X-TM-AS-MML: No X-Gm-Message-State: ALoCoQk6OTf22x1ADh5CFnfZOx8JeYaB9JBVZSyoZdzWEowx5R06L62mNEo0xXOHEB1CCQsHypDs This patch adds driver for I2S interface Signed-off-by: R. Chandrasekar Signed-off-by: Rajeshwari Shinde --- Makefile | 1 + drivers/sound/Makefile | 47 +++++++ drivers/sound/i2s.c | 358 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/sound/sound.c | 220 +++++++++++++++++++++++++++++ include/i2s.h | 127 +++++++++++++++++ include/sound.h | 62 +++++++++ 6 files changed, 815 insertions(+), 0 deletions(-) create mode 100644 drivers/sound/Makefile create mode 100644 drivers/sound/i2s.c create mode 100644 drivers/sound/sound.c create mode 100644 include/i2s.h create mode 100644 include/sound.h diff --git a/Makefile b/Makefile index 6e8b5a7..b914980 100644 --- a/Makefile +++ b/Makefile @@ -288,6 +288,7 @@ LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o endif LIBS += drivers/rtc/librtc.o LIBS += drivers/serial/libserial.o +LIBS += drivers/sound/libsound.o ifeq ($(CONFIG_GENERIC_LPC_TPM),y) LIBS += drivers/tpm/libtpm.o endif diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile new file mode 100644 index 0000000..60d6af7 --- /dev/null +++ b/drivers/sound/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (C) 2012 Samsung Electronics +# R. Chandrasekar +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libsound.o + +COBJS-$(CONFIG_SOUND) += sound.o +COBJS-$(CONFIG_I2S) += i2s.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +# diff --git a/drivers/sound/i2s.c b/drivers/sound/i2s.c new file mode 100644 index 0000000..9485980 --- /dev/null +++ b/drivers/sound/i2s.c @@ -0,0 +1,358 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) +#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) +#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) +#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) + +#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */ + +/* + * Sets the frame size for I2S LR clock + * + * @param i2s_reg i2s regiter address + * @param rfs Frame Size + */ +static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_RCLK_MASK; + + switch (rfs) { + case 768: + mod |= MOD_RCLK_768FS; + break; + case 512: + mod |= MOD_RCLK_512FS; + break; + case 384: + mod |= MOD_RCLK_384FS; + break; + default: + mod |= MOD_RCLK_256FS; + break; + } + + writel(mod, &i2s_reg->mod); +} + +/* + * Sets the i2s transfer control + * + * @param i2s_reg i2s regiter address + * @param on 1 enable tx , 0 disable tx transfer + */ +static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) +{ + unsigned int con = readl(&i2s_reg->con); + unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK; + + if (on) { + con |= CON_ACTIVE; + con &= ~CON_TXCH_PAUSE; + + } else { + + con |= CON_TXCH_PAUSE; + con &= ~CON_ACTIVE; + } + + writel(mod, &i2s_reg->mod); + writel(con, &i2s_reg->con); +} + +/* + * set the bit clock frame size (in multiples of LRCLK) + * + * @param i2s_reg i2s regiter address + * @param bfs bit Frame Size + */ +static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BCLK_MASK; + + switch (bfs) { + case 48: + mod |= MOD_BCLK_48FS; + break; + case 32: + mod |= MOD_BCLK_32FS; + break; + case 24: + mod |= MOD_BCLK_24FS; + break; + case 16: + mod |= MOD_BCLK_16FS; + break; + default: + return; + } + writel(mod, &i2s_reg->mod); +} + +/* + * flushes the i2stx fifo + * + * @param i2s_reg i2s regiter address + * @param flush Tx fifo flush command (0x00 - do not flush + * 0x80 - flush tx fifo) + */ +void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) +{ + /* Flush the FIFO */ + setbits_le32(&i2s_reg->fic, flush); + clrbits_le32(&i2s_reg->fic, flush); +} + +/* + * Set System Clock direction + * + * @param i2s_reg i2s regiter address + * @param dir Clock direction + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) +{ + unsigned int mod = readl(&i2s_reg->mod); + + if (dir == SND_SOC_CLOCK_IN) + mod |= MOD_CDCLKCON; + else + mod &= ~MOD_CDCLKCON; + + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets I2S Clcok format + * + * @param fmt i2s clock properties + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) +{ + unsigned int mod = readl(&i2s_reg->mod); + unsigned int tmp = 0; + unsigned int ret = 0; + + /* Format is priority */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + tmp |= MOD_SDF_IIS; + break; + default: + debug("%s: Invalid format priority [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); + return -1; + } + + /* + * INV flag is relative to the FORMAT flag - if set it simply + * flips the polarity specified by the Standard + */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + if (tmp & MOD_LR_RLOW) + tmp &= ~MOD_LR_RLOW; + else + tmp |= MOD_LR_RLOW; + break; + default: + debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_INV_MASK)); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + tmp |= MOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + /* Set default source clock in Master mode */ + ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT); + if (ret != 0) { + debug("%s:set i2s clock direction failed\n", __func__); + return -1; + } + break; + default: + debug("%s: Invalid master selection [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_MASTER_MASK)); + return -1; + } + + mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); + mod |= tmp; + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets the sample width in bits + * + * @param blc samplewidth (size of sample in bits) + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BLCP_MASK; + mod &= ~MOD_BLC_MASK; + + switch (blc) { + case 8: + mod |= MOD_BLCP_8BIT; + mod |= MOD_BLC_8BIT; + break; + case 16: + mod |= MOD_BLCP_16BIT; + mod |= MOD_BLC_16BIT; + break; + + case 24: + mod |= MOD_BLCP_24BIT; + mod |= MOD_BLC_24BIT; + break; + default: + debug("%s: Invalid sample size input [0x%x]\n", + __func__, blc); + return -1; + } + writel(mod, &i2s_reg->mod); + + return 0; +} + +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data, + unsigned long data_size) +{ + int i; + int start; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + if (data_size < FIFO_LENGTH) { + debug("%s : Invalid data size\n", __func__); + return -1; /* invalid pcm data size */ + } + + /* fill the tx buffer before stating the tx transmit */ + for (i = 0; i < FIFO_LENGTH; i++) + writel(*data++, &i2s_reg->txd); + + data_size -= FIFO_LENGTH; + i2s_txctrl(i2s_reg, I2S_TX_ON); + + while (data_size > 0) { + start = get_timer(0); + if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) { + writel(*data++, &i2s_reg->txd); + data_size--; + } else { + if (get_timer(start) > TIMEOUT_I2S_TX) { + i2s_txctrl(i2s_reg, I2S_TX_OFF); + debug("%s: I2S Transfer Timeout\n", __func__); + return -1; + } + } + } + i2s_txctrl(i2s_reg, I2S_TX_OFF); + + return 0; +} + +int i2s_tx_init(struct i2stx_info *pi2s_tx) +{ + int ret; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + /* Initialize GPIO for I2s */ + exynos_pinmux_config(PERIPH_ID_I2S1, 0); + + /* Set EPLL Clock */ + ret = clock_epll_set_rate(pi2s_tx->audio_pll_clk); + if (ret != 0) { + debug("%s: epll clock set rate falied\n", __func__); + return -1; + } + + /* Select Clk Source for Audio1 */ + clock_select_i2s_clk_source(); + + /* Set Prescaler to get MCLK */ + clock_set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, + (pi2s_tx->samplingrate * (pi2s_tx->rfs))); + + /* Configure I2s format */ + ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM)); + if (ret == 0) { + i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); + ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); + if (ret != 0) { + debug("%s:set sample rate failed\n", __func__); + return -1; + } + + i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs); + /* disable i2s transfer flag and flush the fifo */ + i2s_txctrl(i2s_reg, I2S_TX_OFF); + i2s_fifo(i2s_reg, FIC_TXFLUSH); + } else + debug("%s: failed\n", __func__); + + return ret; +} diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c new file mode 100644 index 0000000..84a7281 --- /dev/null +++ b/drivers/sound/sound.c @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include "wm8994.h" +#include + +/* defines */ +#define SOUND_400_HZ 400 +#define SOUND_BITS_IN_BYTE 8 + +/* pcm values for 400hz 48k sampling rate from 1 cycle */ +unsigned short sine_table_400[120] = { + 0, 1714, 3425, 5125, 6812, 8480, 10125, 11742, 13327, 14875, 16383, + 17846, 19259, 20620, 21925, 23169, 24350, 25464, 26509, 27480, 28377, + 29195, 29934, 30590, 31163, 31650, 32050, 32363, 32587, 32722, 32767, + 32722, 32587, 32363, 32050, 31650, 31163, 30590, 29934, 29195, 28377, + 27480, 26509, 25464, 24350, 23169, 21925, 20620, 19259, 17846, 16383, + 14875, 13327, 11742, 10125, 8480, 6812, 5125, 3425, 1714, 0, -1714, + -3425, -5125, -6812, -8480, -10125, -11742, -13327, -14875, -16383, + -17846, -19259, -20620, -21925, -23169, -24350, -25464, -26509, + -27480, -28377, -29195, -29934, -30590, -31163, -31650, -32050, + -32363, -32587, -32722, -32767, -32722, -32587, -32363, -32050, + -31650, -31163, -30590, -29934, -29195, -28377, -27480, -26509, + -25464, -24350, -23169, -21925, -20620, -19259, -17846, -16383, + -14875, -13327, -11742, -10125, -8480, -6812, -5125, -3425, -1714 +}; + +/* Globals */ +struct i2stx_info g_i2stx_pri; +struct sound_codec_info g_codec_info; + +/* + * get_sound_fdt_values gets fdt values for i2s parameters + * + * @param i2stx_info i2s transmitter transfer param structure + * @param blob FDT blob + */ +static void get_sound_i2s_values(struct i2stx_info *i2s) +{ + i2s->base_address = samsung_get_base_i2s(); + i2s->audio_pll_clk = I2S_PLL_CLK; + i2s->samplingrate = I2S_SAMPLING_RATE; + i2s->bitspersample = I2S_BITS_PER_SAMPLE; + i2s->channels = I2S_CHANNELS; + i2s->rfs = I2S_RFS; + i2s->bfs = I2S_BFS; +} + +/* + * Gets fdt values for wm8994 config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + + switch (AUDIO_COMPAT) { + case AUDIO_COMPAT_SPI: + debug("%s: Support not added for SPI interface\n", __func__); + return -1; + break; + case AUDIO_COMPAT_I2C: + pcodec_info->i2c_bus = AUDIO_I2C_BUS; + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); + break; + default: + debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT); + return -1; + } + + if (error == -1) { + debug("fail to get wm8994 codec node properties\n"); + return -1; + } + + return 0; +} + +/* + * Gets fdt values for codec config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_codec_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + const char *codectype; + + codectype = AUDIO_CODEC; + + if (!strcmp(codectype, "wm8994")) { + pcodec_info->codec_type = CODEC_WM_8994; + error = get_sound_wm8994_values(pcodec_info); + } else + error = -1; + + if (error == -1) { + debug("fail to get sound codec node properties\n"); + return -1; + } + + return 0; +} + +int sound_init(void) +{ + int ret; + struct i2stx_info *pi2s_tx = &g_i2stx_pri; + struct sound_codec_info *pcodec_info = &g_codec_info; + + /* Get the I2S Values */ + get_sound_i2s_values(pi2s_tx); + + /* Get the codec Values */ + if (get_sound_codec_values(pcodec_info) < 0) + return -1; + + ret = i2s_tx_init(pi2s_tx); + if (ret) { + debug("%s: Failed to init i2c transmit: ret=%d\n", __func__, + ret); + return ret; + } + + /* Check the codec type and initialise the same */ + if (pcodec_info->codec_type == CODEC_WM_8994) { + ret = wm8994_init(pcodec_info, WM8994_AIF2, + pi2s_tx->samplingrate, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->bitspersample, pi2s_tx->channels); + } else { + debug("%s: Unknown code type %d\n", __func__, + pcodec_info->codec_type); + return -1; + } + if (ret) { + debug("%s: Codec init failed\n", __func__); + return -1; + } + + return ret; +} + +/* + * Generates 400hz sine wave data for 1sec + * + * @param samplingrate samplinng rate of the sinewave need to be generated + * @param data data buffer pointer + */ +static void sound_prepare_sinewave_400hz_buffer(unsigned short *data) +{ + int freq = SOUND_400_HZ; + int i; + + while (freq--) { + i = ARRAY_SIZE(sine_table_400); + + for (i = 0; i < ARRAY_SIZE(sine_table_400); i++) { + *data++ = sine_table_400[i]; + *data++ = sine_table_400[i]; + } + } +} + +int sound_play(void) +{ + unsigned int *data; + unsigned long data_size; + unsigned int ret; + + /* Sine wave Buffer length computation */ + data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels; + data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE); + data = malloc(data_size); + + if (data == NULL) { + debug("%s: malloc failed\n", __func__); + return -1; + } + + sound_prepare_sinewave_400hz_buffer((unsigned short *)data); + + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, + (data_size / sizeof(int))); + free(data); + + return ret; +} diff --git a/include/i2s.h b/include/i2s.h new file mode 100644 index 0000000..f1b642e --- /dev/null +++ b/include/i2s.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_H__ +#define __I2S_H__ + +/* + * DAI hardware audio formats. + * + * Describes the physical PCM data formating and clocking. Add new formats + * to the end. + */ +#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */ +#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */ +#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */ +#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */ +#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */ +#define SND_SOC_DAIFMT_AC97 6 /* AC97 */ +#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */ + +/* left and right justified also known as MSB and LSB respectively */ +#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J +#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J + +/* + * DAI hardware signal inversions. + * + * Specifies whether the DAI can also support inverted clocks for the specified + * format. + */ +#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */ +#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */ +#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */ +#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */ + +/* + * DAI hardware clock masters. + * + * This is wrt the codec, the inverse is true for the interface + * i.e. if the codec is clk and FRM master then the interface is + * clk and frame slave. + */ +#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */ +#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */ +#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */ +#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */ + +#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f +#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0 +#define SND_SOC_DAIFMT_INV_MASK 0x0f00 +#define SND_SOC_DAIFMT_MASTER_MASK 0xf000 + +/* + * Master Clock Directions + */ +#define SND_SOC_CLOCK_IN 0 +#define SND_SOC_CLOCK_OUT 1 + +/* I2S Tx Control */ +#define I2S_TX_ON 1 +#define I2S_TX_OFF 0 + +#define FIFO_LENGTH 64 + +/* I2s Registers */ +struct i2s_reg { + unsigned int con; /* base + 0 , Control register */ + unsigned int mod; /* Mode register */ + unsigned int fic; /* FIFO control register */ + unsigned int psr; /* Reserved */ + unsigned int txd; /* Transmit data register */ + unsigned int rxd; /* Receive Data Register */ +}; + +/* This structure stores the i2s related information */ +struct i2stx_info { + unsigned int rfs; /* LR clock frame size */ + unsigned int bfs; /* Bit slock frame size */ + unsigned int audio_pll_clk; /* Audio pll frequency in Hz */ + unsigned int samplingrate; /* sampling rate */ + unsigned int bitspersample; /* bits per sample */ + unsigned int channels; /* audio channels */ + unsigned int base_address; /* I2S Register Base */ +}; + +/* + * Sends the given data through i2s tx + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * @param *data address of the data buffer + * @param data_size array size of the int buffer (total size / size of int) + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data, + unsigned long data_size); + +/* + * Initialise i2s transmiter + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_tx_init(struct i2stx_info *pi2s_tx); + +#endif /* __I2S_H__ */ diff --git a/include/sound.h b/include/sound.h new file mode 100644 index 0000000..1d29ded --- /dev/null +++ b/include/sound.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar < rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SOUND_H__ +#define __SOUND_H__ + +/* sound codec enum */ +enum en_sound_codec { + CODEC_WM_8994, + CODEC_WM_8995, + CODEC_MAX +}; + +/* sound codec enum */ +enum sound_compat { + AUDIO_COMPAT_SPI, + AUDIO_COMPAT_I2C, +}; + +/* Codec information structure to store the info from device tree */ +struct sound_codec_info { + int i2c_bus; + int i2c_dev_addr; + enum en_sound_codec codec_type; +}; + +/* + * Initialises audio sub system + * + * @return int value 0 for success, -1 for error + */ +int sound_init(void); + +/* + * plays the pcm data buffer in pcm_data.h through i2s1 to make the + * sine wave sound + * + * @return int 0 for success, -1 for error + */ +int sound_play(void); + +#endif /* __SOUND__H__ */