diff mbox series

[v11,06/13] clk: actions: Add common clock driver

Message ID 1587304717-13322-7-git-send-email-amittomer25@gmail.com
State Superseded
Headers show
Series Actions S700 SoC support | expand

Commit Message

Amit Tomer April 19, 2020, 1:58 p.m. UTC
This patch converts S900 clock driver to something common that can
be used for other SoCs, for instance S700(few of clk registers are same).

Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
---
Changes since v10:
        * No change.
Changes since v9:
        * Checked the relevant SoC model.
Changes since v8:
        * Fixed the bubblegum-96 boot issue by introducing
          dev_get_driver_data API to read driver data.
Changes since v7:
        * No changes.
Changes since v6:
        * Fixed the bug that breaks S900(missing break in switch statement).
Changes since v5:
        * No changes.
Changes since v4:
        * This patch is re-ordered, moved from 08/11 to 04/11.
Changes since v3:
        * Replaced dtsi with dts in subject line along with arm:dts:
          to the prefix.
        * Added reviewed-by tag.
Changes since v2:
        * Newly added patch, not there in v2/v1.
---
 arch/arm/Kconfig                          |   2 +
 arch/arm/include/asm/arch-owl/clk_s900.h  |  57 -----------
 arch/arm/include/asm/arch-owl/regs_s700.h |  56 +++++++++++
 configs/bubblegum_96_defconfig            |   3 -
 drivers/clk/owl/Kconfig                   |   8 +-
 drivers/clk/owl/Makefile                  |   2 +-
 drivers/clk/owl/clk_owl.c                 | 155 ++++++++++++++++++++++++++++++
 drivers/clk/owl/clk_owl.h                 |  64 ++++++++++++
 drivers/clk/owl/clk_s900.c                | 137 --------------------------
 9 files changed, 280 insertions(+), 204 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c

Comments

Tom Rini April 26, 2020, 11:28 a.m. UTC | #1
On Sun, Apr 19, 2020 at 07:28:30PM +0530, Amit Singh Tomar wrote:

> This patch converts S900 clock driver to something common that can
> be used for other SoCs, for instance S700(few of clk registers are same).
> 
> Reviewed-by: Andre Przywara <andre.przywara at arm.com>
> Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d04442d..84499b3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -876,6 +876,8 @@  config ARCH_OWL
 	select DM
 	select DM_SERIAL
 	select OWL_SERIAL
+	select CLK
+	select CLK_OWL
 	select OF_CONTROL
 	imply CMD_DM
 
diff --git a/arch/arm/include/asm/arch-owl/clk_s900.h b/arch/arm/include/asm/arch-owl/clk_s900.h
deleted file mode 100644
index 88e88f7..0000000
--- a/arch/arm/include/asm/arch-owl/clk_s900.h
+++ /dev/null
@@ -1,57 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Actions Semi S900 Clock Definitions
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
- *
- */
-
-#ifndef _OWL_CLK_S900_H_
-#define _OWL_CLK_S900_H_
-
-#include <clk-uclass.h>
-
-struct owl_clk_priv {
-	phys_addr_t base;
-};
-
-/* BUSCLK register definitions */
-#define CMU_PDBGDIV_8		7
-#define CMU_PDBGDIV_SHIFT	26
-#define CMU_PDBGDIV_DIV		(CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
-#define CMU_PERDIV_8		7
-#define CMU_PERDIV_SHIFT	20
-#define CMU_PERDIV_DIV		(CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
-#define CMU_NOCDIV_2		1
-#define CMU_NOCDIV_SHIFT	19
-#define CMU_NOCDIV_DIV		(CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
-#define CMU_DMMCLK_SRC_APLL	2
-#define CMU_DMMCLK_SRC_SHIFT	10
-#define CMU_DMMCLK_SRC		(CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
-#define CMU_APBCLK_DIV		BIT(8)
-#define CMU_NOCCLK_SRC		BIT(7)
-#define CMU_AHBCLK_DIV		BIT(4)
-#define CMU_CORECLK_MASK	3
-#define CMU_CORECLK_CPLL	BIT(1)
-#define CMU_CORECLK_HOSC	BIT(0)
-
-/* COREPLL register definitions */
-#define CMU_COREPLL_EN		BIT(9)
-#define CMU_COREPLL_HOSC_EN	BIT(8)
-#define CMU_COREPLL_OUT		(1104 / 24)
-
-/* DEVPLL register definitions */
-#define CMU_DEVPLL_CLK		BIT(12)
-#define CMU_DEVPLL_EN		BIT(8)
-#define CMU_DEVPLL_OUT		(660 / 6)
-
-/* UARTCLK register definitions */
-#define CMU_UARTCLK_SRC_DEVPLL	BIT(16)
-
-/* DEVCLKEN1 register definitions */
-#define CMU_DEVCLKEN1_UART5	BIT(21)
-
-#define PLL_STABILITY_WAIT_US	50
-
-#endif
diff --git a/arch/arm/include/asm/arch-owl/regs_s700.h b/arch/arm/include/asm/arch-owl/regs_s700.h
new file mode 100644
index 0000000..2f21c15
--- /dev/null
+++ b/arch/arm/include/asm/arch-owl/regs_s700.h
@@ -0,0 +1,56 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S700 Register Definitions
+ *
+ */
+
+#ifndef _OWL_REGS_S700_H_
+#define _OWL_REGS_S700_H_
+
+#define CMU_COREPLL		0x0000
+#define CMU_DEVPLL		0x0004
+#define CMU_DDRPLL		0x0008
+#define CMU_NANDPLL		0x000C
+#define CMU_DISPLAYPLL		0x0010
+#define CMU_AUDIOPLL		0x0014
+#define CMU_TVOUTPLL		0x0018
+#define CMU_BUSCLK		0x001C
+#define CMU_SENSORCLK		0x0020
+#define CMU_LCDCLK		0x0024
+#define CMU_DSIPLLCLK		0x0028
+#define CMU_CSICLK		0x002C
+#define CMU_DECLK		0x0030
+#define CMU_SICLK		0x0034
+#define CMU_BUSCLK1		0x0038
+#define CMU_HDECLK		0x003C
+#define CMU_VDECLK		0x0040
+#define CMU_VCECLK		0x0044
+#define CMU_NANDCCLK		0x004C
+#define CMU_SD0CLK		0x0050
+#define CMU_SD1CLK		0x0054
+#define CMU_SD2CLK		0x0058
+#define CMU_UART0CLK		0x005C
+#define CMU_UART1CLK		0x0060
+#define CMU_UART2CLK		0x0064
+#define CMU_UART3CLK		0x0068
+#define CMU_UART4CLK		0x006C
+#define CMU_UART5CLK		0x0070
+#define CMU_UART6CLK		0x0074
+#define CMU_PWM0CLK		0x0078
+#define CMU_PWM1CLK		0x007C
+#define CMU_PWM2CLK		0x0080
+#define CMU_PWM3CLK		0x0084
+#define CMU_PWM4CLK		0x0088
+#define CMU_PWM5CLK		0x008C
+#define CMU_GPU3DCLK		0x0090
+#define CMU_CORECTL		0x009C
+#define CMU_DEVCLKEN0		0x00A0
+#define CMU_DEVCLKEN1		0x00A4
+#define CMU_DEVRST0		0x00A8
+#define CMU_DEVRST1		0x00AC
+#define CMU_USBPLL		0x00B0
+#define CMU_ETHERNETPLL		0x00B4
+#define CMU_CVBSPLL		0x00B8
+#define CMU_SSTSCLK		0x00C0
+
+#endif
diff --git a/configs/bubblegum_96_defconfig b/configs/bubblegum_96_defconfig
index 8c94def..e76e9a2 100644
--- a/configs/bubblegum_96_defconfig
+++ b/configs/bubblegum_96_defconfig
@@ -17,6 +17,3 @@  CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
 CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_CLK=y
-CONFIG_CLK_OWL=y
-CONFIG_CLK_S900=y
diff --git a/drivers/clk/owl/Kconfig b/drivers/clk/owl/Kconfig
index 661f198..c6afef9 100644
--- a/drivers/clk/owl/Kconfig
+++ b/drivers/clk/owl/Kconfig
@@ -3,10 +3,6 @@  config CLK_OWL
         depends on CLK && ARCH_OWL
         help
           Enable support for clock managemet unit present in Actions Semi
-	  OWL SoCs.
+	  Owl series S900/S700 SoCs.
+
 
-config CLK_S900
-        bool "Actions Semi S900 clock driver"
-        depends on CLK_OWL && ARM64
-        help
-          Enable support for the clocks in Actions Semi S900 SoC.
diff --git a/drivers/clk/owl/Makefile b/drivers/clk/owl/Makefile
index 63ab573..5218b6b 100644
--- a/drivers/clk/owl/Makefile
+++ b/drivers/clk/owl/Makefile
@@ -1,3 +1,3 @@ 
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_CLK_S900) += clk_s900.o
+obj-$(CONFIG_CLK_OWL) += clk_owl.o
diff --git a/drivers/clk/owl/clk_owl.c b/drivers/clk/owl/clk_owl.c
new file mode 100644
index 0000000..5607b2b
--- /dev/null
+++ b/drivers/clk/owl/clk_owl.c
@@ -0,0 +1,155 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common clock driver for Actions Semi SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include "clk_owl.h"
+#include <asm/io.h>
+#if defined(CONFIG_MACH_S900)
+#include <asm/arch-owl/regs_s900.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#elif defined(CONFIG_MACH_S700)
+#include <asm/arch-owl/regs_s700.h>
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#endif
+
+void owl_clk_init(struct owl_clk_priv *priv)
+{
+	u32 bus_clk = 0, core_pll, dev_pll;
+
+#if defined(CONFIG_MACH_S900)
+	/* Enable ASSIST_PLL */
+	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
+	udelay(PLL_STABILITY_WAIT_US);
+#endif
+
+	/* Source HOSC to DEV_CLK */
+	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	/* Configure BUS_CLK */
+	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
+			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
+			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
+	writel(bus_clk, priv->base + CMU_BUSCLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure CORE_PLL */
+	core_pll = readl(priv->base + CMU_COREPLL);
+	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
+	writel(core_pll, priv->base + CMU_COREPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure DEV_PLL */
+	dev_pll = readl(priv->base + CMU_DEVPLL);
+	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
+	writel(dev_pll, priv->base + CMU_DEVPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Source CORE_PLL for CORE_CLK */
+	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
+			CMU_CORECLK_CPLL);
+
+	/* Source DEV_PLL for DEV_CLK */
+	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+}
+
+int owl_clk_enable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+	enum owl_soc model = dev_get_driver_data(clk->dev);
+
+	switch (clk->id) {
+	case CLK_UART5:
+		if (model != S900)
+			return -EINVAL;
+		/* Source HOSC for UART5 interface */
+		clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART5 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+		break;
+	case CLK_UART3:
+		if (model != S700)
+			return -EINVAL;
+		/* Source HOSC for UART3 interface */
+		clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART3 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int owl_clk_disable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+	enum owl_soc model = dev_get_driver_data(clk->dev);
+
+	switch (clk->id) {
+	case CLK_UART5:
+		if (model != S900)
+			return -EINVAL;
+		/* Disable UART5 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+		break;
+	case CLK_UART3:
+		if (model != S700)
+			return -EINVAL;
+		/* Disable UART3 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int owl_clk_probe(struct udevice *dev)
+{
+	struct owl_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	/* setup necessary clocks */
+	owl_clk_init(priv);
+
+	return 0;
+}
+
+static const struct clk_ops owl_clk_ops = {
+	.enable = owl_clk_enable,
+	.disable = owl_clk_disable,
+};
+
+static const struct udevice_id owl_clk_ids[] = {
+#if defined(CONFIG_MACH_S900)
+	{ .compatible = "actions,s900-cmu", .data = S900 },
+#elif defined(CONFIG_MACH_S700)
+	{ .compatible = "actions,s700-cmu", .data = S700 },
+#endif
+	{ }
+};
+
+U_BOOT_DRIVER(clk_owl) = {
+	.name		= "clk_owl",
+	.id		= UCLASS_CLK,
+	.of_match	= owl_clk_ids,
+	.ops		= &owl_clk_ops,
+	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
+	.probe		= owl_clk_probe,
+};
diff --git a/drivers/clk/owl/clk_owl.h b/drivers/clk/owl/clk_owl.h
new file mode 100644
index 0000000..b8d3362
--- /dev/null
+++ b/drivers/clk/owl/clk_owl.h
@@ -0,0 +1,64 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi SoCs Clock Definitions
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
+ *
+ */
+
+#ifndef _OWL_CLK_H_
+#define _OWL_CLK_H_
+
+#include <clk-uclass.h>
+
+enum owl_soc {
+	S700,
+	S900,
+};
+
+struct owl_clk_priv {
+	phys_addr_t base;
+};
+
+/* BUSCLK register definitions */
+#define CMU_PDBGDIV_8		7
+#define CMU_PDBGDIV_SHIFT	26
+#define CMU_PDBGDIV_DIV		(CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
+#define CMU_PERDIV_8		7
+#define CMU_PERDIV_SHIFT	20
+#define CMU_PERDIV_DIV		(CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
+#define CMU_NOCDIV_2		1
+#define CMU_NOCDIV_SHIFT	19
+#define CMU_NOCDIV_DIV		(CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
+#define CMU_DMMCLK_SRC_APLL	2
+#define CMU_DMMCLK_SRC_SHIFT	10
+#define CMU_DMMCLK_SRC		(CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
+#define CMU_APBCLK_DIV		BIT(8)
+#define CMU_NOCCLK_SRC		BIT(7)
+#define CMU_AHBCLK_DIV		BIT(4)
+#define CMU_CORECLK_MASK	3
+#define CMU_CORECLK_CPLL	BIT(1)
+#define CMU_CORECLK_HOSC	BIT(0)
+
+/* COREPLL register definitions */
+#define CMU_COREPLL_EN		BIT(9)
+#define CMU_COREPLL_HOSC_EN	BIT(8)
+#define CMU_COREPLL_OUT		(1104 / 24)
+
+/* DEVPLL register definitions */
+#define CMU_DEVPLL_CLK		BIT(12)
+#define CMU_DEVPLL_EN		BIT(8)
+#define CMU_DEVPLL_OUT		(660 / 6)
+
+/* UARTCLK register definitions */
+#define CMU_UARTCLK_SRC_DEVPLL	BIT(16)
+
+#define PLL_STABILITY_WAIT_US	50
+
+#define CMU_DEVCLKEN1_UART5	BIT(21)
+#define CMU_DEVCLKEN1_UART3	BIT(11)
+
+#define CMU_DEVCLKEN1_ETH_S700	BIT(23)
+
+#endif
diff --git a/drivers/clk/owl/clk_s900.c b/drivers/clk/owl/clk_s900.c
deleted file mode 100644
index d60f199..0000000
--- a/drivers/clk/owl/clk_s900.c
+++ /dev/null
@@ -1,137 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 clock driver
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/arch-owl/clk_s900.h>
-#include <asm/arch-owl/regs_s900.h>
-#include <asm/io.h>
-
-#include <dt-bindings/clock/actions,s900-cmu.h>
-
-void owl_clk_init(struct owl_clk_priv *priv)
-{
-	u32 bus_clk = 0, core_pll, dev_pll;
-
-	/* Enable ASSIST_PLL */
-	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source HOSC to DEV_CLK */
-	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	/* Configure BUS_CLK */
-	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
-			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
-			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
-	writel(bus_clk, priv->base + CMU_BUSCLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure CORE_PLL */
-	core_pll = readl(priv->base + CMU_COREPLL);
-	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
-	writel(core_pll, priv->base + CMU_COREPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure DEV_PLL */
-	dev_pll = readl(priv->base + CMU_DEVPLL);
-	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
-	writel(dev_pll, priv->base + CMU_DEVPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source CORE_PLL for CORE_CLK */
-	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
-			CMU_CORECLK_CPLL);
-
-	/* Source DEV_PLL for DEV_CLK */
-	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-}
-
-void owl_uart_clk_enable(struct owl_clk_priv *priv)
-{
-	/* Source HOSC for UART5 interface */
-	clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
-
-	/* Enable UART5 interface clock */
-	setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-void owl_uart_clk_disable(struct owl_clk_priv *priv)
-{
-	/* Disable UART5 interface clock */
-	clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-int owl_clk_enable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLK_UART5:
-		owl_uart_clk_enable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-int owl_clk_disable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLK_UART5:
-		owl_uart_clk_disable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-static int owl_clk_probe(struct udevice *dev)
-{
-	struct owl_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	/* setup necessary clocks */
-	owl_clk_init(priv);
-
-	return 0;
-}
-
-static struct clk_ops owl_clk_ops = {
-	.enable = owl_clk_enable,
-	.disable = owl_clk_disable,
-};
-
-static const struct udevice_id owl_clk_ids[] = {
-	{ .compatible = "actions,s900-cmu" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_owl) = {
-	.name		= "clk_s900",
-	.id		= UCLASS_CLK,
-	.of_match	= owl_clk_ids,
-	.ops		= &owl_clk_ops,
-	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
-	.probe		= owl_clk_probe,
-};