From patchwork Tue Jun 16 19:20:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Igor Opaniuk X-Patchwork-Id: 242512 List-Id: U-Boot discussion From: igor.opaniuk at gmail.com (Igor Opaniuk) Date: Tue, 16 Jun 2020 22:20:11 +0300 Subject: [PATCH v1 13/13] colibri_imx6: boot env configuration updates In-Reply-To: <1592335211-5998-1-git-send-email-igor.opaniuk@gmail.com> References: <1592335211-5998-1-git-send-email-igor.opaniuk@gmail.com> Message-ID: <1592335211-5998-14-git-send-email-igor.opaniuk@gmail.com> From: Igor Opaniuk 1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk --- include/configs/colibri_imx6.h | 29 +---------------------------- 1 file changed, 1 insertion(+), 28 deletions(-) diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 6beef25..7271f29 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -83,6 +83,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include @@ -92,14 +93,6 @@ #define BOOTENV #endif /* CONFIG_SPL_BUILD */ -#define DFU_ALT_EMMC_INFO \ - "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "zImage fat 0 1;" \ - "imx6dl-colibri-eval-v3.dtb fat 0 1;" \ - "imx6dl-colibri-cam-eval-v3.dtb fat 0 1" - #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ "uboot_blk=8a\0" \ @@ -111,24 +104,6 @@ "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" -#define EMMC_BOOTCMD \ - "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\ - "rw,noatime rootfstype=ext4 " \ - "rootwait\0" \ - "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ - "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ - "${vidargs}; echo Booting from internal eMMC chip...; " \ - "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \ - "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootz ${kernel_addr_r} ${dtbparam}\0" \ - "emmcbootpart=1\0" \ - "emmcdev=0\0" \ - "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ - "${fdt_addr_r} ${fdt_file} && " \ - "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \ - "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ - "emmcrootpart=2\0" - #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x12100000\0" \ @@ -156,8 +131,6 @@ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ - "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ - EMMC_BOOTCMD \ "fdt_file=" FDT_FILE "\0" \ "fdt_fixup=;\0" \ MEM_LAYOUT_ENV_SETTINGS \