@@ -901,6 +901,11 @@ config ARCH_MX5
select CPU_V7A
imply MXC_GPIO
+config ARCH_NEXELL
+ bool "Nexell S5P4418/S5P6818 SoC"
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select DM
+
config ARCH_OWL
bool "Actions Semi OWL SoCs"
select DM
@@ -1858,6 +1863,8 @@ source "arch/arm/cpu/armv8/Kconfig"
source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-nexell/Kconfig"
+
source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
@@ -65,6 +65,7 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MVEBU) += mvebu
+machine-$(CONFIG_ARCH_NEXELL) += nexell
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_OWL) += owl
new file mode 100644
@@ -0,0 +1,58 @@
+if ARCH_NEXELL
+
+config ARCH_S5P4418
+ bool "Nexell S5P4418 SoC"
+ select CPU_V7A
+ select OF_CONTROL
+ select OF_SEPARATE
+ select NX_GPIO
+ select PL011_SERIAL
+ select PL011_SERIAL_FLUSH_ON_INIT
+ help
+ Enable support for Nexell S5P4418 SoC.
+
+config ARCH_S5P6818
+ bool "Nexell S5P6818 SoC"
+ select ARM64
+ select ARMV8_MULTIENTRY
+ help
+ Enable support for Nexell S5P6818 SoC.
+
+menu "Nexell S5P4418/S5P6818"
+ depends on ARCH_NEXELL
+
+choice
+ prompt "Nexell S5P4418/S5P6818 board select"
+ optional
+
+config TARGET_NANOPI2
+ bool "FriendlyARM NanoPi2 / NanoPC-T2 Board"
+ select ARCH_S5P4418
+ help
+ Enable support for FriendlyARM NanoPi2 and NanoPC-T2 Boards.
+
+endchoice
+
+config SYS_BOARD
+ default "nanopi2"
+
+config SYS_VENDOR
+ default "friendlyarm"
+
+config SYS_SOC
+ default "nexell"
+
+config SYS_CONFIG_NAME
+ default "s5p4418_nanopi2"
+
+endmenu
+
+config SYS_PLLFIN
+ int
+
+config TIMER_SYS_TICK_CH
+ int
+
+source "board/friendlyarm/Kconfig"
+
+endif
new file mode 100644
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 Nexell
+# Hyunseok, Jung <hsjung at nexell.co.kr>
+
+obj-y += clock.o
+obj-y += timer.o
+obj-y += reset.o
+obj-y += nx_gpio.o
+obj-y += tieoff.o
+obj-$(CONFIG_ARCH_S5P4418) += reg-call.o
+obj-$(CONFIG_ARCH_S5P4418) += nx_sec_reg.o
+obj-$(CONFIG_CMD_BOOTL) += cmd_boot_linux.o
new file mode 100644
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung at nexell.co.kr>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+
+/*
+ * clock generator macros
+ */
+#define I_PLL0_BIT (0)
+#define I_PLL1_BIT (1)
+#define I_PLL2_BIT (2)
+#define I_PLL3_BIT (3)
+#define I_EXT1_BIT (4)
+#define I_EXT2_BIT (5)
+#define I_CLKn_BIT (7)
+#define I_EXT1_BIT_FORCE (8)
+#define I_EXT2_BIT_FORCE (9)
+
+#define I_CLOCK_NUM 6 /* PLL0, PLL1, PLL2, PLL3, EXT1, EXT2 */
+
+#define I_EXECEPT_CLK (0)
+#define I_CLOCK_MASK (((1 << I_CLOCK_NUM) - 1) & ~I_EXECEPT_CLK)
+
+#define I_PLL0 (1 << I_PLL0_BIT)
+#define I_PLL1 (1 << I_PLL1_BIT)
+#define I_PLL2 (1 << I_PLL2_BIT)
+#define I_PLL3 (1 << I_PLL3_BIT)
+#define I_EXTCLK1 (1 << I_EXT1_BIT)
+#define I_EXTCLK2 (1 << I_EXT2_BIT)
+#define I_EXTCLK1_FORCE (1 << I_EXT1_BIT_FORCE)
+#define I_EXTCLK2_FORCE (1 << I_EXT2_BIT_FORCE)
+
+#define I_PLL_0_1 (I_PLL0 | I_PLL1)
+#define I_PLL_0_2 (I_PLL_0_1 | I_PLL2)
+#define I_PLL_0_3 (I_PLL_0_2 | I_PLL3)
+#define I_CLKnOUT (0)
+
+#define I_PCLK (1 << 16)
+#define I_BCLK (1 << 17)
+#define I_GATE_PCLK (1 << 20)
+#define I_GATE_BCLK (1 << 21)
+#define I_PCLK_MASK (I_GATE_PCLK | I_PCLK)
+#define I_BCLK_MASK (I_GATE_BCLK | I_BCLK)
+
+struct clk_dev_peri {
+ const char *dev_name;
+ void __iomem *base;
+ int dev_id;
+ int periph_id;
+ int clk_step;
+ u32 in_mask;
+ u32 in_mask1;
+ int div_src_0;
+ int div_val_0;
+ int invert_0;
+ int div_src_1;
+ int div_val_1;
+ int invert_1;
+ int in_extclk_1;
+ int in_extclk_2;
+};
+
+struct clk_dev {
+ struct clk clk;
+ struct clk *link;
+ const char *name;
+ struct clk_dev_peri *peri;
+};
+
+struct clk_dev_map {
+ unsigned int con_enb;
+ unsigned int con_gen[4];
+};
+
+#define CLK_PERI_1S(name, devid, id, addr, mk)[id] = \
+ { .dev_name = name, .dev_id = devid, .periph_id = id, .clk_step = 1, \
+ .base = (void *)addr, .in_mask = mk, }
+
+#define CLK_PERI_2S(name, devid, id, addr, mk, mk2)[id] = \
+ { .dev_name = name, .dev_id = devid, .periph_id = id, .clk_step = 2, \
+ .base = (void *)addr, .in_mask = mk, .in_mask1 = mk2, }
+
+static const char * const clk_core[] = {
+ CORECLK_NAME_PLL0, CORECLK_NAME_PLL1, CORECLK_NAME_PLL2,
+ CORECLK_NAME_PLL3, CORECLK_NAME_FCLK, CORECLK_NAME_MCLK,
+ CORECLK_NAME_BCLK, CORECLK_NAME_PCLK, CORECLK_NAME_HCLK,
+};
+
+/*
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+static struct clk_dev_peri clk_periphs[]
+ __attribute__((section(".data"))) = {
+ CLK_PERI_1S(DEV_NAME_TIMER, 0, CLK_ID_TIMER_0,
+ PHY_BASEADDR_CLKGEN14, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_TIMER, 1, CLK_ID_TIMER_1,
+ PHY_BASEADDR_CLKGEN0, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_TIMER, 2, CLK_ID_TIMER_2,
+ PHY_BASEADDR_CLKGEN1, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_TIMER, 3, CLK_ID_TIMER_3,
+ PHY_BASEADDR_CLKGEN2, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 0, CLK_ID_UART_0,
+ PHY_BASEADDR_CLKGEN22, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 1, CLK_ID_UART_1,
+ PHY_BASEADDR_CLKGEN24, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 2, CLK_ID_UART_2,
+ PHY_BASEADDR_CLKGEN23, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 3, CLK_ID_UART_3,
+ PHY_BASEADDR_CLKGEN25, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 4, CLK_ID_UART_4,
+ PHY_BASEADDR_CLKGEN26, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_UART, 5, CLK_ID_UART_5,
+ PHY_BASEADDR_CLKGEN27, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_PWM, 0, CLK_ID_PWM_0,
+ PHY_BASEADDR_CLKGEN13, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_PWM, 1, CLK_ID_PWM_1,
+ PHY_BASEADDR_CLKGEN3, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_PWM, 2, CLK_ID_PWM_2,
+ PHY_BASEADDR_CLKGEN4, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_PWM, 3, CLK_ID_PWM_3,
+ PHY_BASEADDR_CLKGEN5, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_I2C, 0, CLK_ID_I2C_0,
+ PHY_BASEADDR_CLKGEN6, (I_GATE_PCLK)),
+ CLK_PERI_1S(DEV_NAME_I2C, 1, CLK_ID_I2C_1,
+ PHY_BASEADDR_CLKGEN7, (I_GATE_PCLK)),
+ CLK_PERI_1S(DEV_NAME_I2C, 2, CLK_ID_I2C_2,
+ PHY_BASEADDR_CLKGEN8, (I_GATE_PCLK)),
+ CLK_PERI_2S(DEV_NAME_GMAC, 0, CLK_ID_GMAC,
+ PHY_BASEADDR_CLKGEN10,
+ (I_PLL_0_3 | I_EXTCLK1 | I_EXTCLK1_FORCE),
+ (I_CLKnOUT)),
+ CLK_PERI_2S(DEV_NAME_I2S, 0, CLK_ID_I2S_0,
+ PHY_BASEADDR_CLKGEN15, (I_PLL_0_3 | I_EXTCLK1),
+ (I_CLKnOUT)),
+ CLK_PERI_2S(DEV_NAME_I2S, 1, CLK_ID_I2S_1,
+ PHY_BASEADDR_CLKGEN16, (I_PLL_0_3 | I_EXTCLK1),
+ (I_CLKnOUT)),
+ CLK_PERI_2S(DEV_NAME_I2S, 2, CLK_ID_I2S_2,
+ PHY_BASEADDR_CLKGEN17, (I_PLL_0_3 | I_EXTCLK1),
+ (I_CLKnOUT)),
+ CLK_PERI_1S(DEV_NAME_SDHC, 0, CLK_ID_SDHC_0,
+ PHY_BASEADDR_CLKGEN18, (I_PLL_0_2 | I_GATE_PCLK)),
+ CLK_PERI_1S(DEV_NAME_SDHC, 1, CLK_ID_SDHC_1,
+ PHY_BASEADDR_CLKGEN19, (I_PLL_0_2 | I_GATE_PCLK)),
+ CLK_PERI_1S(DEV_NAME_SDHC, 2, CLK_ID_SDHC_2,
+ PHY_BASEADDR_CLKGEN20, (I_PLL_0_2 | I_GATE_PCLK)),
+ CLK_PERI_1S(DEV_NAME_SPI, 0, CLK_ID_SPI_0,
+ PHY_BASEADDR_CLKGEN37, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_SPI, 1, CLK_ID_SPI_1,
+ PHY_BASEADDR_CLKGEN38, (I_PLL_0_2)),
+ CLK_PERI_1S(DEV_NAME_SPI, 2, CLK_ID_SPI_2,
+ PHY_BASEADDR_CLKGEN39, (I_PLL_0_2)),
+};
+
+#define CLK_PERI_NUM ((int)ARRAY_SIZE(clk_periphs))
+#define CLK_CORE_NUM ((int)ARRAY_SIZE(clk_core))
+#define CLK_DEVS_NUM (CLK_CORE_NUM + CLK_PERI_NUM)
+#define MAX_DIVIDER ((1 << 8) - 1) /* 256, align 2 */
+
+static struct clk_dev st_clk_devs[CLK_DEVS_NUM]
+ __attribute__((section(".data")));
+#define clk_dev_get(n) ((struct clk_dev *)&st_clk_devs[n])
+#define clk_container(p) (container_of(p, struct clk_dev, clk))
+
+/*
+ * Core frequencys
+ */
+struct _core_hz_ {
+ unsigned long pll[4]; /* PLL */
+ unsigned long cpu_fclk, cpu_bclk; /* cpu */
+ unsigned long mem_fclk, mem_dclk, mem_bclk, mem_pclk; /* ddr */
+ unsigned long bus_bclk, bus_pclk; /* bus */
+#if defined(CONFIG_ARCH_S5P6818)
+ unsigned long cci4_bclk, cci4_pclk; /* cci */
+#endif
+ /* ip */
+ unsigned long g3d_bclk;
+ unsigned long coda_bclk, coda_pclk;
+#if defined(CONFIG_ARCH_S5P6818)
+ unsigned long disp_bclk, disp_pclk;
+ unsigned long hdmi_pclk;
+#endif
+};
+
+/*
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+/* core clock */
+static struct _core_hz_ core_hz __attribute__((section(".data")));
+
+#define CORE_HZ_SIZE (sizeof(core_hz) / 4)
+
+/*
+ * CLKGEN HW
+ */
+static inline void clk_dev_bclk(void *base, int on)
+{
+ struct clk_dev_map *reg = base;
+ unsigned int val = readl(®->con_enb) & ~(0x3);
+
+ val |= (on ? 3 : 0) & 0x3; /* always BCLK */
+ writel(val, ®->con_enb);
+}
+
+static inline void clk_dev_pclk(void *base, int on)
+{
+ struct clk_dev_map *reg = base;
+ unsigned int val = 0;
+
+ if (!on)
+ return;
+
+ val = readl(®->con_enb) & ~(1 << 3);
+ val |= (1 << 3);
+ writel(val, ®->con_enb);
+}
+
+static inline void clk_dev_rate(void *base, int step, int src, int div)
+{
+ struct clk_dev_map *reg = base;
+ unsigned int val = 0;
+
+ val = readl(®->con_gen[step << 1]);
+ val &= ~(0x07 << 2);
+ val |= (src << 2); /* source */
+ val &= ~(0xFF << 5);
+ val |= (div - 1) << 5; /* divider */
+ writel(val, ®->con_gen[step << 1]);
+}
+
+static inline void clk_dev_inv(void *base, int step, int inv)
+{
+ struct clk_dev_map *reg = base;
+ unsigned int val = readl(®->con_gen[step << 1]) & ~(1 << 1);
+
+ val |= (inv << 1);
+ writel(val, ®->con_gen[step << 1]);
+}
+
+static inline void clk_dev_enb(void *base, int on)
+{
+ struct clk_dev_map *reg = base;
+ unsigned int val = readl(®->con_enb) & ~(1 << 2);
+
+ val |= ((on ? 1 : 0) << 2);
+ writel(val, ®->con_enb);
+}
+
+/*
+ * CORE FREQUENCY
+ *
+ * PLL0 [P,M,S] ------- | | ----- [DIV0] --- CPU-G0
+ * |M| ----- [DIV1] --- BCLK/PCLK
+ * PLL1 [P,M,S] ------- | | ----- [DIV2] --- DDR
+ * |U| ----- [DIV3] --- 3D
+ * PLL2 [P,M,S,K]-------| | ----- [DIV4] --- CODA
+ * |X| ----- [DIV5] --- DISPLAY
+ * PLL3 [P,M,S,K]-------| | ----- [DIV6] --- HDMI
+ * | | ----- [DIV7] --- CPU-G1
+ * | | ----- [DIV8] --- CCI-400(FASTBUS)
+ *
+ */
+
+struct nx_clkpwr_registerset {
+ u32 clkmodereg0; /* 0x000 : Clock Mode Register0 */
+ u32 __reserved0; /* 0x004 */
+ u32 pllsetreg[4]; /* 0x008 ~ 0x014 : PLL Setting Register */
+ u32 __reserved1[2]; /* 0x018 ~ 0x01C */
+ u32 dvoreg[9]; /* 0x020 ~ 0x040 : Divider Setting Register */
+ u32 __Reserved2; /* 0x044 */
+ u32 pllsetreg_sscg[6]; /* 0x048 ~ 0x05C */
+ u32 __reserved3[8]; /* 0x060 ~ 0x07C */
+ u8 __reserved4[0x200 - 0x80]; /* padding (0x80 ~ 0x1FF) */
+ u32 gpiowakeupriseenb; /* 0x200 : GPIO Rising Edge Detect En. Reg. */
+ u32 gpiowakeupfallenb; /* 0x204 : GPIO Falling Edge Detect En. Reg. */
+ u32 gpiorstenb; /* 0x208 : GPIO Reset Enable Register */
+ u32 gpiowakeupenb; /* 0x20C : GPIO Wakeup Source Enable */
+ u32 gpiointenb; /* 0x210 : Interrupt Enable Register */
+ u32 gpiointpend; /* 0x214 : Interrupt Pend Register */
+ u32 resetstatus; /* 0x218 : Reset Status Register */
+ u32 intenable; /* 0x21C : Interrupt Enable Register */
+ u32 intpend; /* 0x220 : Interrupt Pend Register */
+ u32 pwrcont; /* 0x224 : Power Control Register */
+ u32 pwrmode; /* 0x228 : Power Mode Register */
+ u32 __reserved5; /* 0x22C : Reserved Region */
+ u32 scratch[3]; /* 0x230 ~ 0x238 : Scratch Register */
+ u32 sysrstconfig; /* 0x23C : System Reset Configuration Reg. */
+ u8 __reserved6[0x2A0 - 0x240]; /* padding (0x240 ~ 0x29F) */
+ u32 cpupowerdownreq; /* 0x2A0 : CPU Power Down Request Register */
+ u32 cpupoweronreq; /* 0x2A4 : CPU Power On Request Register */
+ u32 cpuresetmode; /* 0x2A8 : CPU Reset Mode Register */
+ u32 cpuwarmresetreq; /* 0x2AC : CPU Warm Reset Request Register */
+ u32 __reserved7; /* 0x2B0 */
+ u32 cpustatus; /* 0x2B4 : CPU Status Register */
+ u8 __reserved8[0x400 - 0x2B8]; /* padding (0x2B8 ~ 0x33F) */
+};
+
+static struct nx_clkpwr_registerset * const clkpwr =
+ (struct nx_clkpwr_registerset *)PHY_BASEADDR_CLKPWR;
+
+#define getquotient(v, d) ((v) / (d))
+
+#define DIV_CPUG0 0
+#define DIV_BUS 1
+#define DIV_MEM 2
+#define DIV_G3D 3
+#define DIV_CODA 4
+#if defined(CONFIG_ARCH_S5P6818)
+#define DIV_DISP 5
+#define DIV_HDMI 6
+#define DIV_CPUG1 7
+#define DIV_CCI4 8
+#endif
+
+#define DVO0 3
+#define DVO1 9
+#define DVO2 15
+#define DVO3 21
+
+static unsigned int pll_rate(unsigned int plln, unsigned int xtal)
+{
+ unsigned int val, val1, nP, nM, nS, nK;
+ unsigned int temp = 0;
+
+ val = clkpwr->pllsetreg[plln];
+ val1 = clkpwr->pllsetreg_sscg[plln];
+ xtal /= 1000; /* Unit Khz */
+
+ nP = (val >> 18) & 0x03F;
+ nM = (val >> 8) & 0x3FF;
+ nS = (val >> 0) & 0x0FF;
+ nK = (val1 >> 16) & 0xFFFF;
+
+ if (plln > 1 && nK) {
+ temp = (unsigned int)(getquotient((getquotient((nK * 1000),
+ 65536) * xtal), nP) >> nS);
+ }
+
+ temp = (unsigned int)((getquotient((nM * xtal), nP) >> nS) * 1000)
+ + temp;
+ return temp;
+}
+
+static unsigned int pll_dvo(int dvo)
+{
+ unsigned int val;
+
+ val = (clkpwr->dvoreg[dvo] & 0x7);
+ return val;
+}
+
+static unsigned int pll_div(int dvo)
+{
+ unsigned int val = clkpwr->dvoreg[dvo];
+
+ return ((((val >> DVO3) & 0x3F) + 1) << 24) |
+ ((((val >> DVO2) & 0x3F) + 1) << 16) |
+ ((((val >> DVO1) & 0x3F) + 1) << 8) |
+ ((((val >> DVO0) & 0x3F) + 1) << 0);
+}
+
+#define PLLN_RATE(n) (pll_rate(n, CONFIG_SYS_PLLFIN)) /* 0~ 3 */
+#define CPU_FCLK_RATE(n) (pll_rate(pll_dvo(n), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(n) >> 0) & 0x3F))
+#define CPU_BCLK_RATE(n) (pll_rate(pll_dvo(n), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(n) >> 0) & 0x3F) / \
+ ((pll_div(n) >> 8) & 0x3F))
+
+#define MEM_FCLK_RATE() (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 8) & 0x3F))
+
+#define MEM_DCLK_RATE() (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_MEM) >> 0) & 0x3F))
+
+#define MEM_BCLK_RATE() (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 8) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 16) & 0x3F))
+#define MEM_PCLK_RATE() (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 8) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 16) & 0x3F) / \
+ ((pll_div(DIV_MEM) >> 24) & 0x3F))
+
+#define BUS_BCLK_RATE() (pll_rate(pll_dvo(DIV_BUS), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_BUS) >> 0) & 0x3F))
+#define BUS_PCLK_RATE() (pll_rate(pll_dvo(DIV_BUS), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_BUS) >> 0) & 0x3F) / \
+ ((pll_div(DIV_BUS) >> 8) & 0x3F))
+
+#define G3D_BCLK_RATE() (pll_rate(pll_dvo(DIV_G3D), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_G3D) >> 0) & 0x3F))
+
+#define MPG_BCLK_RATE() (pll_rate(pll_dvo(DIV_CODA), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_CODA) >> 0) & 0x3F))
+#define MPG_PCLK_RATE() (pll_rate(pll_dvo(DIV_CODA), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_CODA) >> 0) & 0x3F) / \
+ ((pll_div(DIV_CODA) >> 8) & 0x3F))
+
+#if defined(CONFIG_ARCH_S5P6818)
+#define DISP_BCLK_RATE() (pll_rate(pll_dvo(DIV_DISP), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_DISP) >> 0) & 0x3F))
+#define DISP_PCLK_RATE() (pll_rate(pll_dvo(DIV_DISP), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_DISP) >> 0) & 0x3F) / \
+ ((pll_div(DIV_DISP) >> 8) & 0x3F))
+
+#define HDMI_PCLK_RATE() (pll_rate(pll_dvo(DIV_HDMI), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_HDMI) >> 0) & 0x3F))
+
+#define CCI4_BCLK_RATE() (pll_rate(pll_dvo(DIV_CCI4), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_CCI4) >> 0) & 0x3F))
+#define CCI4_PCLK_RATE() (pll_rate(pll_dvo(DIV_CCI4), CONFIG_SYS_PLLFIN) / \
+ ((pll_div(DIV_CCI4) >> 0) & 0x3F) / \
+ ((pll_div(DIV_CCI4) >> 8) & 0x3F))
+#endif
+
+static void core_update_rate(int type)
+{
+ switch (type) {
+ case 0:
+ core_hz.pll[0] = PLLN_RATE(0); break;
+ case 1:
+ core_hz.pll[1] = PLLN_RATE(1); break;
+ case 2:
+ core_hz.pll[2] = PLLN_RATE(2); break;
+ case 3:
+ core_hz.pll[3] = PLLN_RATE(3); break;
+ case 4:
+ core_hz.cpu_fclk = CPU_FCLK_RATE(DIV_CPUG0); break;
+ case 5:
+ core_hz.mem_fclk = MEM_FCLK_RATE(); break;
+ case 6:
+ core_hz.bus_bclk = BUS_BCLK_RATE(); break;
+ case 7:
+ core_hz.bus_pclk = BUS_PCLK_RATE(); break;
+ case 8:
+ core_hz.cpu_bclk = CPU_BCLK_RATE(DIV_CPUG0); break;
+ case 9:
+ core_hz.mem_dclk = MEM_DCLK_RATE(); break;
+ case 10:
+ core_hz.mem_bclk = MEM_BCLK_RATE(); break;
+ case 11:
+ core_hz.mem_pclk = MEM_PCLK_RATE(); break;
+ case 12:
+ core_hz.g3d_bclk = G3D_BCLK_RATE(); break;
+ case 13:
+ core_hz.coda_bclk = MPG_BCLK_RATE(); break;
+ case 14:
+ core_hz.coda_pclk = MPG_PCLK_RATE(); break;
+#if defined(CONFIG_ARCH_S5P6818)
+ case 15:
+ core_hz.disp_bclk = DISP_BCLK_RATE(); break;
+ case 16:
+ core_hz.disp_pclk = DISP_PCLK_RATE(); break;
+ case 17:
+ core_hz.hdmi_pclk = HDMI_PCLK_RATE(); break;
+ case 18:
+ core_hz.cci4_bclk = CCI4_BCLK_RATE(); break;
+ case 19:
+ core_hz.cci4_pclk = CCI4_PCLK_RATE(); break;
+#endif
+ };
+}
+
+static unsigned long core_get_rate(int type)
+{
+ unsigned long rate = 0;
+
+ switch (type) {
+ case 0:
+ rate = core_hz.pll[0]; break;
+ case 1:
+ rate = core_hz.pll[1]; break;
+ case 2:
+ rate = core_hz.pll[2]; break;
+ case 3:
+ rate = core_hz.pll[3]; break;
+ case 4:
+ rate = core_hz.cpu_fclk; break;
+ case 5:
+ rate = core_hz.mem_fclk; break;
+ case 6:
+ rate = core_hz.bus_bclk; break;
+ case 7:
+ rate = core_hz.bus_pclk; break;
+ case 8:
+ rate = core_hz.cpu_bclk; break;
+ case 9:
+ rate = core_hz.mem_dclk; break;
+ case 10:
+ rate = core_hz.mem_bclk; break;
+ case 11:
+ rate = core_hz.mem_pclk; break;
+ case 12:
+ rate = core_hz.g3d_bclk; break;
+ case 13:
+ rate = core_hz.coda_bclk; break;
+ case 14:
+ rate = core_hz.coda_pclk; break;
+#if defined(CONFIG_ARCH_S5P6818)
+ case 15:
+ rate = core_hz.disp_bclk; break;
+ case 16:
+ rate = core_hz.disp_pclk; break;
+ case 17:
+ rate = core_hz.hdmi_pclk; break;
+ case 18:
+ rate = core_hz.cci4_bclk; break;
+ case 19:
+ rate = core_hz.cci4_pclk; break;
+#endif
+ default:
+ printf("unknown core clock type %d ...\n", type);
+ break;
+ };
+ return rate;
+}
+
+static long core_set_rate(struct clk *clk, long rate)
+{
+ return clk->rate;
+}
+
+static void core_rate_init(void)
+{
+ int i;
+
+ for (i = 0; i < CORE_HZ_SIZE; i++)
+ core_update_rate(i);
+}
+
+/*
+ * Clock Interfaces
+ */
+static inline long clk_divide(long rate, long request,
+ int align, int *divide)
+{
+ int div = (rate / request);
+ int max = MAX_DIVIDER & ~(align - 1);
+ int adv = (div & ~(align - 1)) + align;
+ long ret;
+
+ if (!div) {
+ if (divide)
+ *divide = 1;
+ return rate;
+ }
+
+ if (div != 1)
+ div &= ~(align - 1);
+
+ if (div != adv && abs(request - rate / div) > abs(request - rate / adv))
+ div = adv;
+
+ div = (div > max ? max : div);
+ if (divide)
+ *divide = div;
+
+ ret = rate / div;
+ return ret;
+}
+
+void clk_put(struct clk *clk)
+{
+}
+
+struct clk *clk_get(const char *id)
+{
+ struct clk_dev *cdev = clk_dev_get(0);
+ struct clk *clk = NULL;
+ const char *str = NULL, *c = NULL;
+ int i, devid;
+
+ if (id)
+ str = id;
+
+ for (i = 0; i < CLK_DEVS_NUM; i++, cdev++) {
+ if (!cdev->name)
+ continue;
+ if (!strncmp(cdev->name, str, strlen(cdev->name))) {
+ c = strrchr((const char *)str, (int)'.');
+ if (!c || !cdev->peri)
+ break;
+ devid = simple_strtoul(++c, NULL, 10);
+ if (cdev->peri->dev_id == devid)
+ break;
+ }
+ }
+ if (i < CLK_DEVS_NUM)
+ clk = &cdev->clk;
+ else
+ clk = &(clk_dev_get(7))->clk; /* pclk */
+
+ return clk ? clk : ERR_PTR(-ENOENT);
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk_dev *pll = NULL, *cdev = clk_container(clk);
+ struct clk_dev_peri *peri = cdev->peri;
+ unsigned long request = rate, rate_hz = 0;
+ unsigned int mask;
+ int step, div[2] = { 0, };
+ int i, n, clk2 = 0;
+ int start_src = 0, max_src = I_CLOCK_NUM;
+ short s1 = 0, s2 = 0, d1 = 0, d2 = 0;
+
+ if (!peri)
+ return core_set_rate(clk, rate);
+
+ step = peri->clk_step;
+ mask = peri->in_mask;
+ debug("clk: %s.%d request = %ld [input=0x%x]\n", peri->dev_name,
+ peri->dev_id, rate, mask);
+
+ if (!(I_CLOCK_MASK & mask)) {
+ if (I_PCLK_MASK & mask)
+ return core_get_rate(CORECLK_ID_PCLK);
+ else if (I_BCLK_MASK & mask)
+ return core_get_rate(CORECLK_ID_BCLK);
+ else
+ return clk->rate;
+ }
+
+next:
+ if (peri->in_mask & I_EXTCLK1_FORCE) {
+ start_src = 4; max_src = 5;
+ }
+ for (n = start_src ; max_src > n; n++) {
+ if (!(((mask & I_CLOCK_MASK) >> n) & 0x1))
+ continue;
+
+ if (n == I_EXT1_BIT) {
+ rate = peri->in_extclk_1;
+ } else if (n == I_EXT2_BIT) {
+ rate = peri->in_extclk_2;
+ } else {
+ pll = clk_dev_get(n);
+ rate = pll->clk.rate;
+ }
+
+ if (!rate)
+ continue;
+
+ for (i = 0; step > i ; i++)
+ rate = clk_divide(rate, request, 2, &div[i]);
+
+ if (rate_hz && (abs(rate - request) > abs(rate_hz - request)))
+ continue;
+
+ debug("clk: %s.%d, pll.%d[%lu] request[%ld] calc[%ld]\n",
+ peri->dev_name, peri->dev_id, n, pll->clk.rate,
+ request, rate);
+
+ if (clk2) {
+ s1 = -1, d1 = -1; /* not use */
+ s2 = n, d2 = div[0];
+ } else {
+ s1 = n, d1 = div[0];
+ s2 = I_CLKn_BIT, d2 = div[1];
+ }
+ rate_hz = rate;
+ }
+
+ /* search 2th clock from input */
+ if (!clk2 && abs(rate_hz - request) &&
+ peri->in_mask1 & ((1 << I_CLOCK_NUM) - 1)) {
+ clk2 = 1;
+ mask = peri->in_mask1;
+ step = 1;
+ goto next;
+ }
+ if (peri->in_mask & I_EXTCLK1_FORCE) {
+ if (s1 == 0) {
+ s1 = 4; s2 = 7;
+ d1 = 1; d2 = 1;
+ }
+ }
+
+ peri->div_src_0 = s1, peri->div_val_0 = d1;
+ peri->div_src_1 = s2, peri->div_val_1 = d2;
+ clk->rate = rate_hz;
+
+ debug("clk: %s.%d, step[%d] src[%d,%d] %ld", peri->dev_name,
+ peri->dev_id, peri->clk_step, peri->div_src_0, peri->div_src_1,
+ rate);
+ debug("/(div0: %d * div1: %d) = %ld, %ld diff (%ld)\n",
+ peri->div_val_0, peri->div_val_1, rate_hz, request,
+ abs(rate_hz - request));
+
+ return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ struct clk_dev *cdev = clk_container(clk);
+
+ if (cdev->link)
+ clk = cdev->link;
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk_dev *cdev = clk_container(clk);
+ struct clk_dev_peri *peri = cdev->peri;
+ int i;
+
+ if (!peri)
+ return core_set_rate(clk, rate);
+
+ clk_round_rate(clk, rate);
+
+ for (i = 0; peri->clk_step > i ; i++) {
+ int s = (i == 0 ? peri->div_src_0 : peri->div_src_1);
+ int d = (i == 0 ? peri->div_val_0 : peri->div_val_1);
+
+ if (-1 == s)
+ continue;
+
+ clk_dev_rate(peri->base, i, s, d);
+
+ debug("clk: %s.%d (%p) set_rate [%d] src[%d] div[%d]\n",
+ peri->dev_name, peri->dev_id, peri->base, i, s, d);
+ }
+
+ return clk->rate;
+}
+
+int clk_enable(struct clk *clk)
+{
+ struct clk_dev *cdev = clk_container(clk);
+ struct clk_dev_peri *peri = cdev->peri;
+ int i = 0, inv = 0;
+
+ if (!peri)
+ return 0;
+
+ debug("clk: %s.%d enable (BCLK=%s, PCLK=%s)\n", peri->dev_name,
+ peri->dev_id, I_GATE_BCLK & peri->in_mask ? "ON" : "PASS",
+ I_GATE_PCLK & peri->in_mask ? "ON" : "PASS");
+
+ if (!(I_CLOCK_MASK & peri->in_mask)) {
+ /* Gated BCLK/PCLK enable */
+ if (I_GATE_BCLK & peri->in_mask)
+ clk_dev_bclk(peri->base, 1);
+
+ if (I_GATE_PCLK & peri->in_mask)
+ clk_dev_pclk(peri->base, 1);
+
+ return 0;
+ }
+
+ /* invert */
+ inv = peri->invert_0;
+ for (; peri->clk_step > i; i++, inv = peri->invert_1)
+ clk_dev_inv(peri->base, i, inv);
+
+ /* Gated BCLK/PCLK enable */
+ if (I_GATE_BCLK & peri->in_mask)
+ clk_dev_bclk(peri->base, 1);
+
+ if (I_GATE_PCLK & peri->in_mask)
+ clk_dev_pclk(peri->base, 1);
+
+ /* restore clock rate */
+ for (i = 0; peri->clk_step > i ; i++) {
+ int s = (i == 0 ? peri->div_src_0 : peri->div_src_1);
+ int d = (i == 0 ? peri->div_val_0 : peri->div_val_1);
+
+ if (s == -1)
+ continue;
+ clk_dev_rate(peri->base, i, s, d);
+ }
+
+ clk_dev_enb(peri->base, 1);
+
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+ struct clk_dev *cdev = clk_container(clk);
+ struct clk_dev_peri *peri = cdev->peri;
+
+ if (!peri)
+ return;
+
+ debug("clk: %s.%d disable\n", peri->dev_name, peri->dev_id);
+
+ if (!(I_CLOCK_MASK & peri->in_mask)) {
+ /* Gated BCLK/PCLK disable */
+ if (I_GATE_BCLK & peri->in_mask)
+ clk_dev_bclk(peri->base, 0);
+
+ if (I_GATE_PCLK & peri->in_mask)
+ clk_dev_pclk(peri->base, 0);
+
+ return;
+ }
+
+ clk_dev_rate(peri->base, 0, 7, 256); /* for power save */
+ clk_dev_enb(peri->base, 0);
+
+ /* Gated BCLK/PCLK disable */
+ if (I_GATE_BCLK & peri->in_mask)
+ clk_dev_bclk(peri->base, 0);
+
+ if (I_GATE_PCLK & peri->in_mask)
+ clk_dev_pclk(peri->base, 0);
+}
+
+/*
+ * Core clocks APIs
+ */
+void __init clk_init(void)
+{
+ struct clk_dev *cdev = st_clk_devs;
+ struct clk_dev_peri *peri = clk_periphs;
+ struct clk *clk = NULL;
+ int i = 0;
+
+ memset(cdev, 0, sizeof(st_clk_devs));
+ core_rate_init();
+
+ for (i = 0; (CLK_CORE_NUM + CLK_PERI_NUM) > i; i++, cdev++) {
+ if (i < CLK_CORE_NUM) {
+ cdev->name = clk_core[i];
+ clk = &cdev->clk;
+ clk->rate = core_get_rate(i);
+ continue;
+ }
+
+ peri = &clk_periphs[i - CLK_CORE_NUM];
+ peri->base = (void *)peri->base;
+
+ cdev->peri = peri;
+ cdev->name = peri->dev_name;
+
+ if (!(I_CLOCK_MASK & peri->in_mask)) {
+ if (I_BCLK_MASK & peri->in_mask)
+ cdev->clk.rate = core_get_rate(CORECLK_ID_BCLK);
+ if (I_PCLK_MASK & peri->in_mask)
+ cdev->clk.rate = core_get_rate(CORECLK_ID_PCLK);
+ }
+
+ /* prevent uart clock disable for low step debug message */
+ #ifndef CONFIG_DEBUG_NX_UART
+ if (peri->dev_name) {
+ #ifdef CONFIG_BACKLIGHT_PWM
+ if (!strcmp(peri->dev_name, DEV_NAME_PWM))
+ continue;
+ #endif
+ }
+ #endif
+ }
+ debug("CPU : Clock Generator= %d EA, ", CLK_DEVS_NUM);
+}
new file mode 100644
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 nexell
+ * jhkim <jhkim at nexell.co.kr>
+ */
+
+#include <common.h>
+#include <bootm.h>
+#include <command.h>
+#include <environment.h>
+#include <errno.h>
+#include <image.h>
+#include <fdt_support.h>
+
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_CLI_FRAMEWORK)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bootm_headers_t linux_images;
+
+static void boot_go_set_os(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[],
+ bootm_headers_t *images)
+{
+ char * const img_addr = argv[0];
+
+ images->os.type = IH_TYPE_KERNEL;
+ images->os.comp = IH_COMP_NONE;
+ images->os.os = IH_OS_LINUX;
+ images->os.load = simple_strtoul(img_addr, NULL, 16);
+ images->ep = images->os.load;
+#if defined(CONFIG_ARM)
+ images->os.arch = IH_ARCH_ARM;
+#elif defined(CONFIG_ARM64)
+ images->os.arch = IH_ARCH_ARM64;
+#else
+ #error "Not support architecture ..."
+#endif
+ if (!IS_ENABLED(CONFIG_OF_LIBFDT) && !IS_ENABLED(CONFIG_SPL_BUILD)) {
+ /* set DTB address for linux kernel */
+ if (argc > 2) {
+ unsigned long ft_addr;
+
+ ft_addr = simple_strtol(argv[2], NULL, 16);
+ images->ft_addr = (char *)ft_addr;
+
+ /*
+ * if not defined IMAGE_ENABLE_OF_LIBFDT,
+ * must be set to fdt address
+ */
+ if (!IMAGE_ENABLE_OF_LIBFDT)
+ gd->bd->bi_boot_params = ft_addr;
+
+ debug("## set ft:%08lx and boot params:%08lx [control of:%s]"
+ "...\n", ft_addr, gd->bd->bi_boot_params,
+ IMAGE_ENABLE_OF_LIBFDT ? "on" : "off");
+ }
+ }
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
+static void boot_start_lmb(bootm_headers_t *images)
+{
+ ulong mem_start;
+ phys_size_t mem_size;
+
+ lmb_init(&images->lmb);
+
+ mem_start = getenv_bootm_low();
+ mem_size = getenv_bootm_size();
+
+ lmb_add(&images->lmb, (phys_addr_t)mem_start, mem_size);
+
+ arch_lmb_reserve(&images->lmb);
+ board_lmb_reserve(&images->lmb);
+}
+#else
+#define lmb_reserve(lmb, base, size)
+static inline void boot_start_lmb(bootm_headers_t *images) { }
+#endif
+
+int do_boot_linux(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ boot_os_fn *boot_fn;
+ bootm_headers_t *images = &linux_images;
+ int flags;
+ int ret;
+
+ boot_start_lmb(images);
+
+ flags = BOOTM_STATE_START;
+
+ argc--; argv++;
+ boot_go_set_os(cmdtp, flag, argc, argv, images);
+
+ if (IS_ENABLED(CONFIG_OF_LIBFDT)) {
+ /* find flattened device tree */
+ ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, images,
+ &images->ft_addr, &images->ft_len);
+ if (ret) {
+ puts("Could not find a valid device tree\n");
+ return 1;
+ }
+ set_working_fdt_addr((ulong)images->ft_addr);
+ }
+
+ if (!IS_ENABLED(CONFIG_OF_LIBFDT))
+ flags |= BOOTM_STATE_OS_GO;
+
+ boot_fn = do_bootm_linux;
+ ret = boot_fn(flags, argc, argv, images);
+
+ if (ret == BOOTM_ERR_UNIMPLEMENTED)
+ show_boot_progress(BOOTSTAGE_ID_DECOMP_UNIMPL);
+ else if (ret == BOOTM_ERR_RESET)
+ do_reset(cmdtp, flag, argc, argv);
+
+ return ret;
+}
+
+U_BOOT_CMD(bootl, CONFIG_SYS_MAXARGS, 1, do_boot_linux,
+ "boot linux image from memory",
+ "[addr [arg ...]]\n - boot linux image stored in memory\n"
+ "\tuse a '-' for the DTB address\n"
+);
+#endif
+
+#if defined(CONFIG_CMD_BOOTD) && !defined(CONFIG_CMD_BOOTM)
+int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ return run_command(env_get("bootcmd"), flag);
+}
+
+U_BOOT_CMD(boot, 1, 1, do_bootd,
+ "boot default, i.e., run 'bootcmd'",
+ ""
+);
+
+/* keep old command name "bootd" for backward compatibility */
+U_BOOT_CMD(bootd, 1, 1, do_bootd,
+ "boot default, i.e., run 'bootcmd'",
+ ""
+);
+#endif
new file mode 100644
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2016 Nexell
+# junghyun kim<jhkim at nexell.co.kr>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+SOCDIR=CPUDIR/$(VENDOR)
+MACHDIR=$(patsubst %,arch/arm/mach-%,$(machine-y))
+
+LDPPFLAGS += -DMACHDIR=$(MACHDIR) -DSOCDIR=$(SOCDIR)
new file mode 100644
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark at nexell.co.kr>
+ */
+
+/*
+ * FIXME : will be remove after support pinctrl
+ */
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include "asm/arch/nx_gpio.h"
+#define NUMBER_OF_GPIO_MODULE 5
+u32 __g_nx_gpio_valid_bit[NUMBER_OF_GPIO_MODULE] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF};
+
+static struct {
+ struct nx_gpio_register_set *pregister;
+} __g_module_variables[NUMBER_OF_GPIO_MODULE] = {
+ { (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOA },
+ { (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOB },
+ { (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOC },
+ { (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOD },
+ { (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOE },
+};
+
+enum { nx_gpio_max_bit = 32 };
+
+void nx_gpio_set_bit(u32 *value, u32 bit, int enable)
+{
+ register u32 newvalue;
+
+ newvalue = *value;
+ newvalue &= ~(1ul << bit);
+ newvalue |= (u32)enable << bit;
+ writel(newvalue, value);
+}
+
+int nx_gpio_get_bit(u32 value, u32 bit)
+{
+ return (int)((value >> bit) & (1ul));
+}
+
+void nx_gpio_set_bit2(u32 *value, u32 bit, u32 bit_value)
+{
+ register u32 newvalue = *value;
+
+ newvalue = (u32)(newvalue & ~(3ul << (bit * 2)));
+ newvalue = (u32)(newvalue | (bit_value << (bit * 2)));
+
+ writel(newvalue, value);
+}
+
+u32 nx_gpio_get_bit2(u32 value, u32 bit)
+{
+ return (u32)((u32)(value >> (bit * 2)) & 3ul);
+}
+
+int nx_gpio_initialize(void)
+{
+ static int binit;
+ u32 i;
+
+ binit = 0;
+
+ if (binit == 0) {
+ for (i = 0; i < NUMBER_OF_GPIO_MODULE; i++)
+ __g_module_variables[i].pregister = NULL;
+ binit = true;
+ }
+ for (i = 0; i < NUMBER_OF_GPIO_MODULE; i++) {
+ __g_nx_gpio_valid_bit[i] = 0xFFFFFFFF;
+ };
+ return true;
+}
+
+u32 nx_gpio_get_number_of_module(void)
+{
+ return NUMBER_OF_GPIO_MODULE;
+}
+
+u32 nx_gpio_get_size_of_register_set(void)
+{
+ return sizeof(struct nx_gpio_register_set);
+}
+
+void nx_gpio_set_base_address(u32 module_index, void *base_address)
+{
+ __g_module_variables[module_index].pregister =
+ (struct nx_gpio_register_set *)base_address;
+}
+
+void *nx_gpio_get_base_address(u32 module_index)
+{
+ return (void *)__g_module_variables[module_index].pregister;
+}
+
+int nx_gpio_open_module(u32 module_index)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ writel(0xFFFFFFFF, &pregister->gpiox_slew_disable_default);
+ writel(0xFFFFFFFF, &pregister->gpiox_drv1_disable_default);
+ writel(0xFFFFFFFF, &pregister->gpiox_drv0_disable_default);
+ writel(0xFFFFFFFF, &pregister->gpiox_pullsel_disable_default);
+ writel(0xFFFFFFFF, &pregister->gpiox_pullenb_disable_default);
+ return true;
+}
+
+int nx_gpio_close_module(u32 module_index) { return true; }
+
+int nx_gpio_check_busy(u32 module_index) { return false; }
+
+void nx_gpio_set_pad_function(u32 module_index, u32 bit_number,
+ u32 padfunc)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit2(&pregister->gpioxaltfn[bit_number / 16],
+ bit_number % 16, padfunc);
+}
+
+void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ writel(lsbvalue, &pregister->gpioxaltfn[0]);
+ writel(msbvalue, &pregister->gpioxaltfn[1]);
+}
+
+int nx_gpio_get_pad_function(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return (int)nx_gpio_get_bit2
+ (readl(&pregister->gpioxaltfn[bit_number / 16]),
+ bit_number % 16);
+}
+
+void nx_gpio_set_output_enable(u32 module_index, u32 bit_number,
+ int output_enb)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpioxoutenb, bit_number, output_enb);
+}
+
+int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return nx_gpio_get_bit(readl(&pregister->gpioxdetenb), bit_number);
+}
+
+u32 nx_gpio_get_detect_enable32(u32 module_index)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return readl(&pregister->gpioxdetenb);
+}
+
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+ int detect_enb)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpioxdetenb, bit_number, detect_enb);
+}
+
+void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ writel(enable_flag, &pregister->gpioxdetenb);
+}
+
+int nx_gpio_get_output_enable(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return nx_gpio_get_bit(readl(&pregister->gpioxoutenb), bit_number);
+}
+
+void nx_gpio_set_output_enable32(u32 module_index, int output_enb)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ if (output_enb)
+ writel(0xFFFFFFFF, &pregister->gpioxoutenb);
+ else
+ writel(0x0, &pregister->gpioxoutenb);
+}
+
+u32 nx_gpio_get_output_enable32(u32 module_index)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return readl(&pregister->gpioxoutenb);
+}
+
+void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpioxout, bit_number, value);
+}
+
+int nx_gpio_get_output_value(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return nx_gpio_get_bit(readl(&pregister->gpioxout), bit_number);
+}
+
+void nx_gpio_set_output_value32(u32 module_index, u32 value)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ writel(value, &pregister->gpioxout);
+}
+
+u32 nx_gpio_get_output_value32(u32 module_index)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return readl(&pregister->gpioxout);
+}
+
+int nx_gpio_get_input_value(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ return nx_gpio_get_bit(readl(&pregister->gpioxpad), bit_number);
+}
+
+void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable)
+{
+ nx_gpio_set_bit(&__g_module_variables[module_index]
+ .pregister->gpiox_pullsel_disable_default,
+ bit_number, true);
+ nx_gpio_set_bit
+ (&__g_module_variables[module_index].pregister->gpiox_pullsel,
+ bit_number, enable);
+}
+
+void nx_gpio_set_pull_select32(u32 module_index, u32 value)
+{
+ writel(value,
+ &__g_module_variables[module_index].pregister->gpiox_pullsel);
+}
+
+int nx_gpio_get_pull_select(u32 module_index, u32 bit_number)
+{
+ return nx_gpio_get_bit
+ (__g_module_variables[module_index].pregister->gpiox_pullsel,
+ bit_number);
+}
+
+u32 nx_gpio_get_pull_select32(u32 module_index)
+{
+ return __g_module_variables[module_index].pregister->gpiox_pullsel;
+}
+
+void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode)
+{
+ nx_gpio_set_bit(&__g_module_variables[module_index]
+ .pregister->gpiox_pullsel_disable_default,
+ bit_number, true);
+ nx_gpio_set_bit(&__g_module_variables[module_index]
+ .pregister->gpiox_pullenb_disable_default,
+ bit_number, true);
+ if (mode == nx_gpio_pull_off) {
+ nx_gpio_set_bit
+ (&__g_module_variables[module_index].pregister->gpiox_pullenb,
+ bit_number, false);
+ nx_gpio_set_bit
+ (&__g_module_variables[module_index].pregister->gpiox_pullsel,
+ bit_number, false);
+ } else {
+ nx_gpio_set_bit
+ (&__g_module_variables[module_index].pregister->gpiox_pullsel,
+ bit_number, (mode & 1 ? true : false));
+ nx_gpio_set_bit
+ (&__g_module_variables[module_index].pregister->gpiox_pullenb,
+ bit_number, true);
+ }
+}
+
+void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number,
+ int enable)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpiox_slew, bit_number,
+ (int)(!enable));
+}
+
+void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number,
+ u32 drvstrength)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpiox_drv1, bit_number,
+ (int)(((u32)drvstrength >> 0) & 0x1));
+ nx_gpio_set_bit(&pregister->gpiox_drv0, bit_number,
+ (int)(((u32)drvstrength >> 1) & 0x1));
+}
+
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+ u32 bit_number, int enable)
+{
+ register struct nx_gpio_register_set *pregister;
+
+ pregister = __g_module_variables[module_index].pregister;
+ nx_gpio_set_bit(&pregister->gpiox_drv1_disable_default, bit_number,
+ (int)(enable));
+ nx_gpio_set_bit(&pregister->gpiox_drv0_disable_default, bit_number,
+ (int)(enable));
+}
+
+u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number)
+{
+ register struct nx_gpio_register_set *pregister;
+ register u32 retvalue;
+
+ pregister = __g_module_variables[module_index].pregister;
+ retvalue =
+ nx_gpio_get_bit(readl(&pregister->gpiox_drv0), bit_number) << 1;
+ retvalue |=
+ nx_gpio_get_bit(readl(&pregister->gpiox_drv1), bit_number) << 0;
+ return retvalue;
+}
new file mode 100644
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/sec_reg.h>
+#include <linux/linkage.h>
+
+#define NEXELL_SMC_BASE 0x82000000
+
+#define NEXELL_SMC_FN(n) (NEXELL_SMC_BASE + (n))
+
+#define NEXELL_SMC_SEC_REG_WRITE NEXELL_SMC_FN(0x0)
+#define NEXELL_SMC_SEC_REG_READ NEXELL_SMC_FN(0x1)
+
+#define SECURE_ID_SHIFT 8
+
+#define SEC_4K_OFFSET ((4 * 1024) - 1)
+#define SEC_64K_OFFSET ((64 * 1024) - 1)
+
+asmlinkage int __invoke_nexell_fn_smc(u32, u32, u32, u32);
+
+int write_sec_reg_by_id(void __iomem *reg, int val, int id)
+{
+ int ret = 0;
+ u32 off = 0;
+
+ switch (id) {
+ case NEXELL_L2C_SEC_ID:
+ case NEXELL_MIPI_SEC_ID:
+ case NEXELL_TOFF_SEC_ID:
+ off = (u32)reg & SEC_4K_OFFSET;
+ break;
+ case NEXELL_MALI_SEC_ID:
+ off = (u32)reg & SEC_64K_OFFSET;
+ break;
+ }
+ ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_WRITE |
+ ((1 << SECURE_ID_SHIFT) + id), off, val, 0);
+ return ret;
+}
+
+int read_sec_reg_by_id(void __iomem *reg, int id)
+{
+ int ret = 0;
+ u32 off = 0;
+
+ switch (id) {
+ case NEXELL_L2C_SEC_ID:
+ case NEXELL_MIPI_SEC_ID:
+ case NEXELL_TOFF_SEC_ID:
+ off = (u32)reg & SEC_4K_OFFSET;
+ break;
+ case NEXELL_MALI_SEC_ID:
+ off = (u32)reg & SEC_64K_OFFSET;
+ break;
+ }
+ ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_READ |
+ ((1 << SECURE_ID_SHIFT) + id), off, 0, 0);
+ return ret;
+}
+
+int write_sec_reg(void __iomem *reg, int val)
+{
+ int ret = 0;
+
+ ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_WRITE,
+ (u32)reg, val, 0);
+ return ret;
+}
+
+int read_sec_reg(void __iomem *reg)
+{
+ int ret = 0;
+
+ ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_READ, (u32)reg, 0, 0);
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,23 @@
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___inst_arm(x) .long x
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+
+#define __SMC(imm4) __inst_arm_thumb32( \
+ 0xE1600070 | (((imm4) & 0xF) << 0), \
+ 0xF7F08000 | (((imm4) & 0xF) << 16) \
+)
+
+ENTRY(__invoke_nexell_fn_smc)
+ __SMC(0)
+ bx lr
+ENDPROC(__invoke_nexell_fn_smc)
new file mode 100644
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ */
+
+/*
+ *FIXME : Not support device tree & reset control driver.
+ * will remove after support device tree & reset control driver.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/reset.h>
+
+struct nx_rstcon_registerset {
+ u32 regrst[(NUMBER_OF_RESET_MODULE_PIN + 31) >> 5];
+};
+
+static struct nx_rstcon_registerset *nx_rstcon =
+ (struct nx_rstcon_registerset *)PHY_BASEADDR_RSTCON;
+
+void nx_rstcon_setrst(u32 rstindex, enum rstcon status)
+{
+ u32 regnum, bitpos, curstat;
+
+ regnum = rstindex >> 5;
+ curstat = (u32)readl(&nx_rstcon->regrst[regnum]);
+ bitpos = rstindex & 0x1f;
+ curstat &= ~(1UL << bitpos);
+ curstat |= (status & 0x01) << bitpos;
+ writel(curstat, &nx_rstcon->regrst[regnum]);
+}
new file mode 100644
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ */
+
+#include <common.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/reset.h>
+#include <asm/arch/nx_gpio.h>
+#include <asm/arch/tieoff.h>
+#include <asm/arch/sec_reg.h>
+
+#define NX_PIN_FN_SIZE 4
+#define TIEOFF_REG_NUM 33
+
+struct nx_tieoff_registerset {
+ u32 tieoffreg[TIEOFF_REG_NUM];
+};
+
+static struct nx_tieoff_registerset *nx_tieoff = (void *)PHY_BASEADDR_TIEOFF;
+
+static int tieoff_readl(void __iomem *reg)
+{
+ if (IS_ENABLED(CONFIG_ARCH_S5P4418))
+ return read_sec_reg_by_id(reg, NEXELL_TOFF_SEC_ID);
+ else
+ return readl(reg);
+}
+
+static int tieoff_writetl(void __iomem *reg, int val)
+{
+ if (IS_ENABLED(CONFIG_ARCH_S5P4418))
+ return write_sec_reg_by_id(reg, val, NEXELL_TOFF_SEC_ID);
+ else
+ return writel(val, reg);
+}
+
+void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value)
+{
+ u32 regindex, mask;
+ u32 lsb, msb;
+ u32 regval;
+
+ u32 position;
+ u32 bitwidth;
+
+ position = tieoff_index & 0xffff;
+ bitwidth = (tieoff_index >> 16) & 0xffff;
+
+ regindex = position >> 5;
+
+ lsb = position & 0x1F;
+ msb = lsb + bitwidth;
+
+ if (msb > 32) {
+ msb &= 0x1F;
+ mask = ~(0xffffffff << lsb);
+ regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+ regval |= ((tieoff_value & ((1UL << bitwidth) - 1)) << lsb);
+ tieoff_writetl(&nx_tieoff->tieoffreg[regindex], regval);
+
+ mask = (0xffffffff << msb);
+ regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+ regval |= ((tieoff_value & ((1UL << bitwidth) - 1)) >> msb);
+ tieoff_writetl(&nx_tieoff->tieoffreg[regindex + 1], regval);
+ } else {
+ mask = (0xffffffff << msb) | (~(0xffffffff << lsb));
+ regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+ regval |= ((tieoff_value & ((1UL << bitwidth) - 1)) << lsb);
+ tieoff_writetl(&nx_tieoff->tieoffreg[regindex], regval);
+ }
+}
+
+u32 nx_tieoff_get(u32 tieoff_index)
+{
+ u32 regindex, mask;
+ u32 lsb, msb;
+ u32 regval;
+
+ u32 position;
+ u32 bitwidth;
+
+ position = tieoff_index & 0xffff;
+ bitwidth = (tieoff_index >> 16) & 0xffff;
+
+ regindex = position / 32;
+ lsb = position % 32;
+ msb = lsb + bitwidth;
+
+ if (msb > 32) {
+ msb &= 0x1F;
+ mask = 0xffffffff << lsb;
+ regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+ regval >>= lsb;
+
+ mask = ~(0xffffffff << msb);
+ regval |= ((tieoff_readl(&nx_tieoff->tieoffreg[regindex + 1])
+ & mask) << (32 - lsb));
+ } else {
+ mask = ~(0xffffffff << msb) & (0xffffffff << lsb);
+ regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+ regval >>= lsb;
+ }
+ return regval;
+}
new file mode 100644
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung at nexell.co.kr>
+ */
+
+#include <common.h>
+#include <log.h>
+
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+#if defined(CONFIG_ARCH_S5P4418)
+#include <asm/arch/reset.h>
+#endif
+
+#if (CONFIG_TIMER_SYS_TICK_CH > 3)
+#error Not support timer channel. Please use "0~3" channels.
+#endif
+
+/* global variables to save timer count
+ *
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+static unsigned long timestamp __attribute__ ((section(".data")));
+static unsigned long lastdec __attribute__ ((section(".data")));
+static int timerinit __attribute__ ((section(".data")));
+
+/* macro to hw timer tick config */
+static long TIMER_FREQ = 1000000;
+static long TIMER_HZ = 1000000 / CONFIG_SYS_HZ;
+static long TIMER_COUNT = 0xFFFFFFFF;
+
+#define REG_TCFG0 (0x00)
+#define REG_TCFG1 (0x04)
+#define REG_TCON (0x08)
+#define REG_TCNTB0 (0x0C)
+#define REG_TCMPB0 (0x10)
+#define REG_TCNT0 (0x14)
+#define REG_CSTAT (0x44)
+
+#define TCON_BIT_AUTO (1 << 3)
+#define TCON_BIT_INVT (1 << 2)
+#define TCON_BIT_UP (1 << 1)
+#define TCON_BIT_RUN (1 << 0)
+#define TCFG0_BIT_CH(ch) ((ch) == 0 || (ch) == 1 ? 0 : 8)
+#define TCFG1_BIT_CH(ch) ((ch) * 4)
+#define TCON_BIT_CH(ch) ((ch) ? (ch) * 4 + 4 : 0)
+#define TINT_CH(ch) (ch)
+#define TINT_CSTAT_BIT_CH(ch) ((ch) + 5)
+#define TINT_CSTAT_MASK (0x1F)
+#define TIMER_TCNT_OFFS (0xC)
+
+void reset_timer_masked(void);
+unsigned long get_timer_masked(void);
+
+/*
+ * Timer HW
+ */
+static inline void timer_clock(void __iomem *base, int ch, int mux, int scl)
+{
+ u32 val = readl(base + REG_TCFG0) & ~(0xFF << TCFG0_BIT_CH(ch));
+
+ writel(val | ((scl - 1) << TCFG0_BIT_CH(ch)), base + REG_TCFG0);
+ val = readl(base + REG_TCFG1) & ~(0xF << TCFG1_BIT_CH(ch));
+ writel(val | (mux << TCFG1_BIT_CH(ch)), base + REG_TCFG1);
+}
+
+static inline void timer_count(void __iomem *base, int ch, unsigned int cnt)
+{
+ writel((cnt - 1), base + REG_TCNTB0 + (TIMER_TCNT_OFFS * ch));
+ writel((cnt - 1), base + REG_TCMPB0 + (TIMER_TCNT_OFFS * ch));
+}
+
+static inline void timer_start(void __iomem *base, int ch)
+{
+ int on = 0;
+ u32 val = readl(base + REG_CSTAT) & ~(TINT_CSTAT_MASK << 5 | 0x1 << ch);
+
+ writel(val | (0x1 << TINT_CSTAT_BIT_CH(ch) | on << ch),
+ base + REG_CSTAT);
+ val = readl(base + REG_TCON) & ~(0xE << TCON_BIT_CH(ch));
+ writel(val | (TCON_BIT_UP << TCON_BIT_CH(ch)), base + REG_TCON);
+
+ val &= ~(TCON_BIT_UP << TCON_BIT_CH(ch));
+ val |= ((TCON_BIT_AUTO | TCON_BIT_RUN) << TCON_BIT_CH(ch));
+ writel(val, base + REG_TCON);
+ dmb();
+}
+
+static inline void timer_stop(void __iomem *base, int ch)
+{
+ int on = 0;
+ u32 val = readl(base + REG_CSTAT) & ~(TINT_CSTAT_MASK << 5 | 0x1 << ch);
+
+ writel(val | (0x1 << TINT_CSTAT_BIT_CH(ch) | on << ch),
+ base + REG_CSTAT);
+ val = readl(base + REG_TCON) & ~(TCON_BIT_RUN << TCON_BIT_CH(ch));
+ writel(val, base + REG_TCON);
+}
+
+static inline unsigned long timer_read(void __iomem *base, int ch)
+{
+ unsigned long ret;
+
+ ret = TIMER_COUNT - readl(base + REG_TCNT0 + (TIMER_TCNT_OFFS * ch));
+ return ret;
+}
+
+int timer_init(void)
+{
+ struct clk *clk = NULL;
+ char name[16] = "pclk";
+ int ch = CONFIG_TIMER_SYS_TICK_CH;
+ unsigned long rate, tclk = 0;
+ unsigned long mout, thz, cmp = -1UL;
+ int tcnt, tscl = 0, tmux = 0;
+ int mux = 0, scl = 0;
+ void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+
+ if (timerinit)
+ return 0;
+
+ /* get with PCLK */
+ clk = clk_get(name);
+ rate = clk_get_rate(clk);
+ for (mux = 0; mux < 5; mux++) {
+ mout = rate / (1 << mux), scl = mout / TIMER_FREQ,
+ thz = mout / scl;
+ if (!(mout % TIMER_FREQ) && 256 > scl) {
+ tclk = thz, tmux = mux, tscl = scl;
+ break;
+ }
+ if (scl > 256)
+ continue;
+ if (abs(thz - TIMER_FREQ) >= cmp)
+ continue;
+ tclk = thz, tmux = mux, tscl = scl;
+ cmp = abs(thz - TIMER_FREQ);
+ }
+ tcnt = tclk; /* Timer Count := 1 Mhz counting */
+
+ TIMER_FREQ = tcnt; /* Timer Count := 1 Mhz counting */
+ TIMER_HZ = TIMER_FREQ / CONFIG_SYS_HZ;
+ tcnt = TIMER_COUNT == 0xFFFFFFFF ? TIMER_COUNT + 1 : tcnt;
+
+ timer_stop(base, ch);
+ timer_clock(base, ch, tmux, tscl);
+ timer_count(base, ch, tcnt);
+ timer_start(base, ch);
+
+ reset_timer_masked();
+ timerinit = 1;
+
+ return 0;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+unsigned long get_timer(unsigned long base)
+{
+ long ret;
+ unsigned long time = get_timer_masked();
+ unsigned long hz = TIMER_HZ;
+
+ ret = time / hz - base;
+ return ret;
+}
+
+void set_timer(unsigned long t)
+{
+ timestamp = (unsigned long)t;
+}
+
+void reset_timer_masked(void)
+{
+ void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+ int ch = CONFIG_TIMER_SYS_TICK_CH;
+
+ /* reset time */
+ /* capure current decrementer value time */
+ lastdec = timer_read(base, ch);
+ /* start "advancing" time stamp from 0 */
+ timestamp = 0;
+}
+
+unsigned long get_timer_masked(void)
+{
+ void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+ int ch = CONFIG_TIMER_SYS_TICK_CH;
+
+ unsigned long now = timer_read(base, ch); /* current tick value */
+
+ if (now >= lastdec) { /* normal mode (non roll) */
+ /* move stamp fordward with absolute diff ticks */
+ timestamp += now - lastdec;
+ } else {
+ /* we have overflow of the count down timer */
+ /* nts = ts + ld + (TLV - now)
+ * ts=old stamp, ld=time that passed before passing through -1
+ * (TLV-now) amount of time after passing though -1
+ * nts = new "advancing time stamp"...
+ * it could also roll and cause problems.
+ */
+ timestamp += now + TIMER_COUNT - lastdec;
+ }
+ /* save last */
+ lastdec = now;
+
+ debug("now=%lu, last=%lu, timestamp=%lu\n", now, lastdec, timestamp);
+ return (unsigned long)timestamp;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long tmo, tmp;
+
+ debug("+udelay=%ld\n", usec);
+
+ if (!timerinit)
+ timer_init();
+
+ /* if "big" number, spread normalization to seconds */
+ if (usec >= 1000) {
+ /* start to normalize for usec to ticks per sec */
+ tmo = usec / 1000;
+ /* find number of "ticks" to wait to achieve target */
+ tmo *= TIMER_FREQ;
+ /* finish normalize. */
+ tmo /= 1000;
+ /* else small number, don't kill it prior to HZ multiply */
+ } else {
+ tmo = usec * TIMER_FREQ;
+ tmo /= (1000 * 1000);
+ }
+
+ tmp = get_timer_masked(); /* get current timestamp */
+ debug("A. tmo=%ld, tmp=%ld\n", tmo, tmp);
+
+ /* if setting this fordward will roll time stamp */
+ if (tmp > (tmo + tmp + 1))
+ /* reset "advancing" timestamp to 0, set lastdec value */
+ reset_timer_masked();
+ else
+ /* set advancing stamp wake up time */
+ tmo += tmp;
+
+ debug("B. tmo=%ld, tmp=%ld\n", tmo, tmp);
+
+ /* loop till event */
+ do {
+ tmp = get_timer_masked();
+ } while (tmo > tmp);
+ debug("-udelay=%ld\n", usec);
+}
+
+void udelay_masked(unsigned long usec)
+{
+ unsigned long tmo, endtime;
+ signed long diff;
+
+ /* if "big" number, spread normalization to seconds */
+ if (usec >= 1000) {
+ /* start to normalize for usec to ticks per sec */
+ tmo = usec / 1000;
+ /* find number of "ticks" to wait to achieve target */
+ tmo *= TIMER_FREQ;
+ /* finish normalize. */
+ tmo /= 1000;
+ } else { /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * TIMER_FREQ;
+ tmo /= (1000 * 1000);
+ }
+
+ endtime = get_timer_masked() + tmo;
+
+ do {
+ unsigned long now = get_timer_masked();
+
+ diff = endtime - now;
+ } while (diff >= 0);
+}
+
+unsigned long long get_ticks(void)
+{
+ return get_timer_masked();
+}
+
+#if defined(CONFIG_ARCH_S5P4418)
+ulong get_tbclk(void)
+{
+ ulong tbclk = TIMER_FREQ;
+ return tbclk;
+}
+#endif
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - SPL not supported yet --> no spl-directory in arch/arm/mach-nexell. Appropriate line in Makefile removed. - clock.c: 'section(".data")' added to declaration of clk_periphs[] and core_hz. - Kconfig: Changes to have a structure like in mach-bcm283x/Kconfig, e.g. "config ..." entries moved from other Kconfig. - timer.c: 'section(".data")' added to declaration of timestamp and lastdec. - arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). Signed-off-by: Stefan Bosch <stefan_b at posteo.net> --- (no changes since v3) Changes in v3: - arch/arm/mach-nexell/Kconfig: "NEXELL_COMMON" removed, has not been used at all. NEXELL_ARMV7_COMMON and NEXELL_ARMV8_COMMON removed, has been used only in the Kconfig at ARCH_S5P4418 and ARCH_S5P6818. Used "select ..."-statements moved appropriately. Missing helps added. - arch/arm/mach-nexell/timer.c: '#include <log.h>' inserted because it has been removed from common.h. - '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman. Changes in v2: - arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used. - line '... += spl/' in in arch/arm/mach-nexell/Makefile deleted, this change has already been stated in the commit message but was missing nethertheless. arch/arm/Kconfig | 7 + arch/arm/Makefile | 1 + arch/arm/mach-nexell/Kconfig | 58 +++ arch/arm/mach-nexell/Makefile | 13 + arch/arm/mach-nexell/clock.c | 869 ++++++++++++++++++++++++++++++++++ arch/arm/mach-nexell/cmd_boot_linux.c | 144 ++++++ arch/arm/mach-nexell/config.mk | 11 + arch/arm/mach-nexell/nx_gpio.c | 352 ++++++++++++++ arch/arm/mach-nexell/nx_sec_reg.c | 82 ++++ arch/arm/mach-nexell/reg-call.S | 23 + arch/arm/mach-nexell/reset.c | 33 ++ arch/arm/mach-nexell/tieoff.c | 107 +++++ arch/arm/mach-nexell/timer.c | 299 ++++++++++++ 13 files changed, 1999 insertions(+) create mode 100644 arch/arm/mach-nexell/Kconfig create mode 100644 arch/arm/mach-nexell/Makefile create mode 100644 arch/arm/mach-nexell/clock.c create mode 100644 arch/arm/mach-nexell/cmd_boot_linux.c create mode 100644 arch/arm/mach-nexell/config.mk create mode 100644 arch/arm/mach-nexell/nx_gpio.c create mode 100644 arch/arm/mach-nexell/nx_sec_reg.c create mode 100644 arch/arm/mach-nexell/reg-call.S create mode 100644 arch/arm/mach-nexell/reset.c create mode 100644 arch/arm/mach-nexell/tieoff.c create mode 100644 arch/arm/mach-nexell/timer.c