diff mbox series

[v4,18/18] warp7: Add support for automated secure boot.scr verification

Message ID 20180424174647.11840-19-bryan.odonoghue@linaro.org
State Accepted
Commit bb96a08d5b48f0ee3415619c2119d7153de1d0c2
Headers show
Series warp7: Enable automated OPTEE/HAB boot flow | expand

Commit Message

Bryan O'Donoghue April 24, 2018, 5:46 p.m. UTC 
This patch adds support for verifying a signed boot.scr. With this in place
it's possible for run-time Linux to update boot.scr to set different
variables such as switching between different boot partitions, pointing to
different kernels etc and for u-boot to verify these changes via the HAB
prior to executing the commands contained in boot.scr.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 include/configs/warp7.h | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 3b1e7c7e88..c9be70ca2a 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -53,6 +53,14 @@ 
 		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"ivt_offset=" __stringify(BOOTROM_IVT_HDR_OFFSET)"\0"\
 	"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
+	"do_bootscript_hab=" \
+		"if test ${hab_enabled} -eq 1; then " \
+			"setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
+			"setenv script ${script_signed}; " \
+			"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
+			"run warp7_auth_or_fail; " \
+			"run bootscript; "\
+		"fi;\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
@@ -79,6 +87,7 @@ 
 #define CONFIG_BOOTCOMMAND \
 	   "mmc dev ${mmcdev};" \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "run do_bootscript_hab;" \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \