From patchwork Fri Jan 17 12:46:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pragnesh Patel X-Patchwork-Id: 239736 List-Id: U-Boot discussion From: pragnesh.patel at sifive.com (Pragnesh Patel) Date: Fri, 17 Jan 2020 18:16:15 +0530 Subject: [PATCH v2 9/9] doc: update FU540 RISC-V documentation In-Reply-To: <20200117124616.24695-1-pragnesh.patel@sifive.com> References: <20200117124616.24695-1-pragnesh.patel@sifive.com> Message-ID: <20200117124616.24695-10-pragnesh.patel@sifive.com> Add descriptions about U-Boot SPL feature and how to build and run. Signed-off-by: Pragnesh Patel --- doc/board/sifive/fu540.rst | 370 +++++++++++++++++++++++++++++++++++++ 1 file changed, 370 insertions(+) diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst index 3937222c6c..e15427414d 100644 --- a/doc/board/sifive/fu540.rst +++ b/doc/board/sifive/fu540.rst @@ -363,3 +363,373 @@ load uImage. Please press Enter to activate this console. / # + + +Running U-Boot SPL +------------------ +The U-Boot SPL will boot in M mode and load the FIT image which include +OpenSBI and U-Boot proper images. After loading progress, it will jump +to OpenSBI first and then U-Boot proper which will run in S mode. + + +How to build U-Boot SPL +----------------------- +Before building U-Boot SPL, OpenSBI must be build first. OpenSBI can be +cloned and build for FU540 as below: + +git clone https://github.com/riscv/opensbi.git +cd opensbi +make PLATFORM=sifive/fu540 + +Copy OpenSBI FW_DYNAMIC image (build/platform/sifive/fu540/firmware/fw_dynamic.bin) +into U-Boot root directory + + +How to build U-Boot SPL booting from MMC +---------------------------------------- +With sifive_fu540_spl_defconfig: + +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation enviornment variable: + +.. code-block:: none + + export ARCH=riscv + export CROSS_COMPILE= + +3. make sifive_fu540_spl_defconfig +4. make + + +Flashing +-------- + +The current U-Boot port is supported in S-mode only. + +A prior stage M-mode firmware/bootloader (e.g OpenSBI) is required to +boot the u-boot.bin in S-mode and provide M-mode runtime services. + +First partition of the sdcard should contain "u-boot.itb" and +Partition type should be of "8300 Linux filesystem". + +.. code-block:: none + + sudo dd if=spl/u-boot-spl.bin of=/dev/disk2s4 bs=1024 + sudo dd if=u-boot.itb of=/dev/disk2s1 bs=1024 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Boot prompt. + +Sample boot log from HiFive Unleashed board +------------------------------------------- + +.. code-block:: none + + U-Boot SPL 2020.01-00176-gfb5af3c225 (Jan 16 2020 - 19:23:14 +0530) + Trying to boot from MMC1 + + + U-Boot 2020.01-00176-gfb5af3c225 (Jan 16 2020 - 19:23:14 +0530) + + CPU: rv64imafdc + Model: SiFive HiFive Unleashed A00 + DRAM: 8 GiB + MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Board serial number should not be 0 !! + Net: + Warning: ethernet at 10090000 (eth0) using random MAC address - 9e:33:74:04:6a:eb + eth0: ethernet at 10090000 + Hit any key to stop autoboot: 0 + => version + U-Boot 2020.01-00176-gfb5af3c225 (Jan 16 2020 - 19:23:14 +0530) + + riscv64-unknown-linux-gnu-gcc (crosstool-NG 1.24.0.37-3f461da) 9.2.0 + GNU ld (crosstool-NG 1.24.0.37-3f461da) 2.32 + => mmc info + Device: spi at 10050000:mmc at 0 + Manufacturer ID: 3 + OEM: 5344 + Name: SC16G + Bus Speed: 20000000 + Mode: SD Legacy + Rd Block Len: 512 + SD version 2.0 + High Capacity: Yes + Capacity: 14.8 GiB + Bus Width: 1-bit + Erase Group Size: 512 Bytes + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000800 0x000107ff "Linux filesystem" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + guid: 36aab838-b418-4342-929e-678d85fb4438 + 2 0x00040800 0x00ecdfde "Linux filesystem" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + guid: 118ac296-e3ff-4ef2-b435-ec6a7bebdd6e + +Now you can configure your networking, tftp server and use tftp boot method to +load uImage. + +.. code-block:: none + + => setenv serverip 172.16.35.74 + => setenv ipaddr 172.16.35.40 + => tftpboot 0x83000000 fit.itb + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 100Mbps full-duplex (lpa: 0x41e1) + Using ethernet at 10090000 device + TFTP from server 172.16.35.74; our IP address is 172.16.35.40 + Filename 'fit.itb'. + Load address: 0x83000000 + Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################### + 880.9 KiB/s + done + Bytes transferred = 13823823 (d2ef4f hex) + => bootm 0x83000000 + ## Loading kernel from FIT Image at 83000000 ... + Using 'config-1' configuration + Trying 'kernel at 1' kernel subimage + Description: Linux kernel + Type: Kernel Image + Compression: uncompressed + Data Start: 0x830000d8 + Data Size: 9247260 Bytes = 8.8 MiB + Architecture: RISC-V + OS: Linux + Load Address: 0x80200000 + Entry Point: 0x80200000 + Verifying Hash Integrity ... OK + ## Loading ramdisk from FIT Image at 83000000 ... + Using 'config-1' configuration + Trying 'ramdisk at 1' ramdisk subimage + Description: ramdisk + Type: RAMDisk Image + Compression: gzip compressed + Data Start: 0x838d3378 + Data Size: 4568674 Bytes = 4.4 MiB + Architecture: RISC-V + OS: Linux + Load Address: 0x82000000 + Entry Point: unavailable + Verifying Hash Integrity ... OK + Loading ramdisk from 0x838d3378 to 0x82000000 + WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file! + ## Loading fdt from FIT Image at 83000000 ... + Using 'config-1' configuration + Trying 'fdt at 1' fdt subimage + Description: unavailable + Type: Flat Device Tree + Compression: uncompressed + Data Start: 0x838d1b80 + Data Size: 6023 Bytes = 5.9 KiB + Architecture: RISC-V + Verifying Hash Integrity ... OK + Booting using the fdt blob at 0x838d1b80 + Loading Kernel Image + Using Device Tree in place at 00000000838d1b80, end 00000000838d6306 + + Starting kernel ... + + [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 + [ 0.000000] Linux version 5.3.0-13236-g97f9a3c4eee5 (pragneshp at sachinj2-OptiPlex-7010) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9 + [ 0.000000] earlycon: sifive0 at MMIO 0x0000000010010000 (options '') + [ 0.000000] printk: bootconsole [sifive0] enabled + [ 0.000000] Initial ramdisk at: 0x(____ptrval____) (4568674 bytes) + [ 0.000000] Zone ranges: + [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] + [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] + [ 0.000000] Movable zone start for each node + [ 0.000000] Early memory node ranges + [ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB) + [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] elf_hwcap is 0x112d + [ 0.000000] percpu: Embedded 17 pages/cpu s30680 r8192 d30760 u69632 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 + [ 0.000000] Kernel command line: earlycon=sifive,0x10010000 console=ttySIF0,115200 + [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) + [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) + [ 0.000000] Sorting __ex_table... + [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off + [ 0.000000] Memory: 8179828K/8386560K available (6081K kernel code, 388K rwdata, 2025K rodata, 209K init, 307K bss, 206732K reserved, 0K cma-r) + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 + [ 0.000000] rcu: Hierarchical RCU implementation. + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 + [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 + [ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts. + [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] + [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns + [ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns + [ 0.008479] Console: colour dummy device 80x25 + [ 0.012817] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) + [ 0.022842] pid_max: default: 32768 minimum: 301 + [ 0.027915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) + [ 0.035329] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) + [ 0.044787] rcu: Hierarchical SRCU implementation. + [ 0.049253] smp: Bringing up secondary CPUs ... + [ 0.055031] smp: Brought up 1 node, 4 CPUs + [ 0.059662] devtmpfs: initialized + [ 0.063815] random: get_random_u32 called from bucket_table_alloc.isra.29+0x4e/0x160 with crng_init=0 + [ 0.072585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns + [ 0.081998] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) + [ 0.089506] NET: Registered protocol family 16 + [ 0.105912] vgaarb: loaded + [ 0.108166] SCSI subsystem initialized + [ 0.111949] usbcore: registered new interface driver usbfs + [ 0.117105] usbcore: registered new interface driver hub + [ 0.122485] usbcore: registered new device driver usb + [ 0.128071] clocksource: Switched to clocksource riscv_clocksource + [ 0.140265] NET: Registered protocol family 2 + [ 0.144438] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) + [ 0.152609] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) + [ 0.162230] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) + [ 0.172148] TCP: Hash tables configured (established 65536 bind 65536) + [ 0.178333] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) + [ 0.185129] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) + [ 0.192542] NET: Registered protocol family 1 + [ 0.196747] RPC: Registered named UNIX socket transport module. + [ 0.202140] RPC: Registered udp transport module. + [ 0.206824] RPC: Registered tcp transport module. + [ 0.211500] RPC: Registered tcp NFSv4.1 backchannel transport module. + [ 0.217929] PCI: CLS 0 bytes, default 64 + [ 0.222133] Unpacking initramfs... + [ 0.578890] Freeing initrd memory: 4460K + [ 0.583069] workingset: timestamp_bits=62 max_order=21 bucket_order=0 + [ 0.596744] NFS: Registering the id_resolver key type + [ 0.601095] Key type id_resolver registered + [ 0.605191] Key type id_legacy registered + [ 0.609190] nfs4filelayout_init: NFSv4 File Layout Driver Registering... + [ 0.616026] 9p: Installing v9fs 9p2000 file system support + [ 0.621682] NET: Registered protocol family 38 + [ 0.625801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) + [ 0.633151] io scheduler mq-deadline registered + [ 0.637659] io scheduler kyber registered + [ 0.685692] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled + [ 0.692289] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0 + [ 0.700672] printk: console [ttySIF0] enabled + [ 0.700672] printk: console [ttySIF0] enabled + [ 0.709334] printk: bootconsole [sifive0] disabled + [ 0.709334] printk: bootconsole [sifive0] disabled + [ 0.719129] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0 + [ 0.728453] [drm] radeon kernel modesetting enabled. + [ 0.745398] loop: module loaded + [ 0.748320] sifive_spi 10040000.spi: mapped; irq=3, cs=1 + [ 0.753595] sifive_spi 10050000.spi: mapped; irq=5, cs=1 + [ 0.758916] libphy: Fixed MDIO Bus: probed + [ 0.762992] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' + [ 0.769750] macb: GEM doesn't support hardware ptp. + [ 0.774636] libphy: MACB_mii_bus: probed + [ 0.940362] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.et) + [ 0.954905] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 6 (9e:33:74:04:6a:eb) + [ 0.964712] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k + [ 0.970429] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. + [ 0.976422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver + [ 0.982845] ehci-pci: EHCI PCI platform driver + [ 0.987301] ehci-platform: EHCI generic platform driver + [ 0.992561] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver + [ 0.998660] ohci-pci: OHCI PCI platform driver + [ 1.003105] ohci-platform: OHCI generic platform driver + [ 1.008570] usbcore: registered new interface driver uas + [ 1.013632] usbcore: registered new interface driver usb-storage + [ 1.019706] mousedev: PS/2 mouse device common for all mice + [ 1.050576] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff, cd polling + [ 1.057720] usbcore: registered new interface driver usbhid + [ 1.063103] usbhid: USB HID core driver + [ 1.067815] NET: Registered protocol family 10 + [ 1.072430] Segment Routing with IPv6 + [ 1.075375] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver + [ 1.081750] NET: Registered protocol family 17 + [ 1.085874] 9pnet: Installing 9P2000 support + [ 1.089962] Key type dns_resolver registered + [ 1.096391] Freeing unused kernel memory: 208K + [ 1.100047] This architecture does not have kernel memory protection. + [ 1.106486] Run /init as init process + Starting syslogd: OK + Starting klogd: OK + Starting mdev... + /etc/init.d/S10mdev: line 9: can't create /proc/sys/kernel/hotplug: nonexistent directory + [ 1.167865] mmc0: host does not support reading read-only switch, assuming write-enable + [ 1.175122] mmc0: new SDHC card on SPI + [ 1.180128] mmcblk0: mmc0:0000 SC16G 14.8 GiB + [ 1.214481] mmcblk0: p1 p2 p4 + modprobe: can't change directory to '/lib/modules': No such file or directory + Initializing random number generator... [ 1.655480] random: dd: uninitialized urandom read (512 bytes read) + done. + Starting network: udhcpc: started, v1.29.3 + udhcpc: sending discover + [ 3.724710] macb 10090000.ethernet eth0: link up (100/Full) + [ 3.729529] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready + udhcpc: sending discover + udhcpc: sending discover + udhcpc: sending select for 172.16.35.78 + udhcpc: lease of 172.16.35.78 obtained, lease time 28800 + deleting routers + adding dns 172.16.34.150 + adding dns 172.16.24.25 + OK + Starting dropbear sshd: [ 7.932851] random: dropbear: uninitialized urandom read (32 bytes read) + OK + + Welcome to Buildroot + buildroot login: root + Password: + #