new file mode 100644
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+#define DPTF_CPU_DEVICE TCPU
+#define DPTF_CPU_ADDR 0x00000001
+
+#ifndef DPTF_CPU_PASSIVE
+#define DPTF_CPU_PASSIVE 80
+#endif
+
+#ifndef DPTF_CPU_CRITICAL
+#define DPTF_CPU_CRITICAL 90
+#endif
+
+#ifndef DPTF_CPU_ACTIVE_AC0
+#define DPTF_CPU_ACTIVE_AC0 90
+#endif
+
+#ifndef DPTF_CPU_ACTIVE_AC1
+#define DPTF_CPU_ACTIVE_AC1 80
+#endif
+
+#ifndef DPTF_CPU_ACTIVE_AC2
+#define DPTF_CPU_ACTIVE_AC2 70
+#endif
+
+#ifndef DPTF_CPU_ACTIVE_AC3
+#define DPTF_CPU_ACTIVE_AC3 60
+#endif
+
+#ifndef DPTF_CPU_ACTIVE_AC4
+#define DPTF_CPU_ACTIVE_AC4 50
+#endif
new file mode 100644
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc at intel.com> for Intel Corp.)
+ */
+
+/*
+ * NOTE: The layout of the GNVS structure below must match the layout in
+ * soc/intel/apollolake/include/soc/nvs.h !!!
+ *
+ */
+
+External (NVSA)
+
+OperationRegion (GNVS, SystemMemory, NVSA, ACPI_GNVS_SIZE)
+Field (GNVS, ByteAcc, NoLock, Preserve)
+{
+ /* Miscellaneous */
+ Offset (0x00),
+ PCNT, 8, // 0x00 - Processor Count
+ PPCM, 8, // 0x01 - Max PPC State
+ LIDS, 8, // 0x02 - LID State
+ PWRS, 8, // 0x03 - AC Power State
+ DPTE, 8, // 0x04 - Enable DPTF
+ CBMC, 32, // 0x05 - 0x08 - coreboot Memory Console
+ PM1I, 64, // 0x09 - 0x10 - System Wake Source - PM1 Index
+ GPEI, 64, // 0x11 - 0x18 - GPE Wake Source
+ NHLA, 64, // 0x19 - 0x20 - NHLT Address
+ NHLL, 32, // 0x21 - 0x24 - NHLT Length
+ PRT0, 32, // 0x25 - 0x28 - PERST_0 Address
+ SCDP, 8, // 0x29 - SD_CD GPIO portid
+ SCDO, 8, // 0x2A - GPIO pad offset relative to the community
+ UIOR, 8, // 0x2B - UART debug controller init on S3 resume
+ EPCS, 8, // 0x2C - SGX Enabled status
+ EMNA, 64, // 0x2D - 0x34 EPC base address
+ ELNG, 64, // 0x35 - 0x3C EPC Length
+
+ /* ChromeOS stuff (0x100 -> 0xfff, size 0xeff) */
+ Offset (0x100),
+ #include <asm/acpi/cros_gnvs.asl>
+}
new file mode 100644
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+#include <asm/arch/gpio.h>
+#include <asm/intel_pinctrl_defs.h>
+// #include <intelblocks/pcr.h>
+// #include <soc/pcr_ids.h>
+#include <asm/arch/iomap.h>
+#include <p2sb.h>
+#include "gpiolib.asl"
+
+scope (\_SB) {
+
+ Device (GPO0)
+ {
+ Name (_HID, GPIO_COMM_NAME)
+ Name (_CID, GPIO_COMM_NAME)
+ Name (_DDN, GPIO_COMM_0_DESC)
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x4000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ {
+ GPIO_BANK_INT
+ }
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ ShiftLeft (GPIO_COMM0_PID, PCR_PORTID_SHIFT, Local0)
+ Or (IOMAP_P2SB_BAR, Local0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ Return(0xf)
+ }
+ }
+
+ Device (GPO1)
+ {
+ Name (_HID, GPIO_COMM_NAME)
+ Name (_CID, GPIO_COMM_NAME)
+ Name (_DDN, GPIO_COMM_1_DESC)
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x4000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ {
+ GPIO_BANK_INT
+ }
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ ShiftLeft (GPIO_COMM1_PID, PCR_PORTID_SHIFT, Local0)
+ Or (IOMAP_P2SB_BAR, Local0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ Return(0xf)
+ }
+ }
+
+ Device (GPO2)
+ {
+ Name (_HID, GPIO_COMM_NAME)
+ Name (_CID, GPIO_COMM_NAME)
+ Name (_DDN, GPIO_COMM_2_DESC)
+ Name (_UID, 3)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x4000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ {
+ GPIO_BANK_INT
+ }
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ ShiftLeft (GPIO_COMM2_PID, PCR_PORTID_SHIFT, Local0)
+ Or (IOMAP_P2SB_BAR, Local0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ Return(0xf)
+ }
+ }
+
+ Device (GPO3)
+ {
+ Name (_HID, GPIO_COMM_NAME)
+ Name (_CID, GPIO_COMM_NAME)
+ Name (_DDN, GPIO_COMM_3_DESC)
+ Name (_UID, 4)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x4000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ {
+ GPIO_BANK_INT
+ }
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ ShiftLeft (GPIO_COMM3_PID, PCR_PORTID_SHIFT, Local0)
+ Or (IOMAP_P2SB_BAR, Local0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ Return(0xf)
+ }
+ }
+
+ Scope(\_SB.PCI0) {
+ /* PERST Assertion
+ * Note: PERST is Active High
+ */
+ Method (PRAS, 0x1, Serialized)
+ {
+ /*
+ * Assert PERST
+ * local1 - to toggle Tx pin of Dw0
+ * local2 - Address of PERST
+ */
+ Store (Arg0, Local2)
+ Store (\_SB.GPC0 (Local2), Local1)
+ Or (Local1, PAD_CFG0_TX_STATE, Local1)
+ \_SB.SPC0 (Local2, Local1)
+ }
+
+ /* PERST DE-Assertion */
+ Method (PRDA, 0x1, Serialized)
+ {
+ /*
+ * De-assert PERST
+ * local1 - to toggle Tx pin of Dw0
+ * local2 - Address of PERST
+ */
+ Store (Arg0, Local2)
+ Store (\_SB.GPC0 (Local2), Local1)
+ And (Local1, Not (PAD_CFG0_TX_STATE), Local1)
+ \_SB.SPC0 (Local2, Local1)
+ }
+ }
+
+ /*
+ * Sleep button device ASL code. We are using this device to
+ * add the _PRW method for a dummy wake event to kernel so that
+ * before going to sleep kernel does not clear bit 15 in ACPI
+ * gpe0a enable register which is actually the GPIO_TIER1_SCI_EN bit.
+ */
+ Device (SLP)
+ {
+ Name (_HID, EisaId ("PNP0C0E"))
+
+ Name (_PRW, Package() { GPE0A_GPIO_TIER1_SCI_STS, 0x3 })
+ }
+}
+
+Scope(\_GPE)
+{
+ /*
+ * Dummy method for the Tier 1 GPIO SCI enable bit. When kernel reads
+ * _L0F in scope GPE it sets bit for gpio_tier1_sci_en in ACPI enable
+ * register at 0x430. For APL ACPI enable register DW0 i.e., ACPI
+ * GPE0a_EN at 0x430 is reserved.
+ */
+ Method(_L0F, 0) {}
+}
new file mode 100644
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+Scope (\_SB)
+{
+ /* Get Pad Configuration DW0 register value */
+ Method (GPC0, 0x1, Serialized)
+ {
+ /* Arg0 - GPIO DW0 address */
+ Store (Arg0, Local0)
+ OperationRegion (PDW0, SystemMemory, Local0, 4)
+ Field (PDW0, AnyAcc, NoLock, Preserve) {
+ TEMP, 32
+ }
+ Return (TEMP)
+ }
+
+ /* Set Pad Configuration DW0 register value */
+ Method (SPC0, 0x2, Serialized)
+ {
+ /* Arg0 - GPIO DW0 address */
+ /* Arg1 - Value for DW0 register */
+ Store (Arg0, Local0)
+ OperationRegion (PDW0, SystemMemory, Local0, 4)
+ Field (PDW0, AnyAcc, NoLock, Preserve) {
+ TEMP,32
+ }
+ Store (Arg1, TEMP)
+ }
+
+ /* Get Pad Configuration DW1 register value */
+ Method (GPC1, 0x1, Serialized)
+ {
+ /* Arg0 - GPIO DW0 address */
+ Store (Add (Arg0, 0x4), Local0)
+ OperationRegion (PDW1, SystemMemory, Local0, 4)
+ Field (PDW1, AnyAcc, NoLock, Preserve) {
+ TEMP, 32
+ }
+ Return (TEMP)
+ }
+
+ /* Set Pad Configuration DW1 register value */
+ Method (SPC1, 0x2, Serialized)
+ {
+ /* Arg0 - GPIO DW0 address */
+ /* Arg1 - Value for DW1 register */
+ Store (Add (Arg0, 0x4), Local0)
+ OperationRegion (PDW1, SystemMemory, Local0, 4)
+ Field(PDW1, AnyAcc, NoLock, Preserve) {
+ TEMP,32
+ }
+ Store (Arg1, TEMP)
+ }
+
+ /* Get DW0 address of a given pad */
+ Method (GDW0, 0x2, Serialized)
+ {
+ /* Arg0 - GPIO portid */
+ /* Arg1 - GPIO pad offset relative to the community */
+ Store (0, Local1)
+ Or( Or (ShiftLeft (Arg0, 16), IOMAP_P2SB_BAR),
+ Local1, Local1)
+ Or( Add (PAD_CFG_BASE, Multiply (Arg1, Multiply (
+ GPIO_NUM_PAD_CFG_REGS, 4))), Local1, Local1)
+ Return (Local1)
+ }
+
+ /* Calculate HOSTSW_REG address */
+ Method (CHSA, 0x1, Serialized)
+ {
+ /* Arg0 - GPIO pad offset relative to the community */
+ Add (HOSTSW_OWN_REG_0, Multiply (Divide (Arg0, 32), 4), Local1)
+ Return (Local1)
+ }
+
+ /* Get Host ownership register of GPIO Community */
+ Method (GHO, 0x2, Serialized)
+ {
+ /* Arg0 - GPIO portid */
+ /* Arg1 - GPIO pad offset relative to the community */
+ Store (CHSA (Arg1), Local1)
+
+ OperationRegion (SHO0, SystemMemory, Or ( Or
+ (IOMAP_P2SB_BAR, ShiftLeft (Arg0, 16)), Local1), 4)
+ Field (SHO0, AnyAcc, NoLock, Preserve) {
+ TEMP, 32
+ }
+ Return (TEMP)
+ }
+
+ /* Set Host ownership register of GPIO Community */
+ Method (SHO, 0x3, Serialized)
+ {
+ /* Arg0 - GPIO portid */
+ /* Arg1 - GPIO pad offset relative to the community */
+ /* Arg2 - Value for Host own register */
+ Store (CHSA (Arg1), Local1)
+
+ OperationRegion (SHO0, SystemMemory, Or ( Or
+ (IOMAP_P2SB_BAR, ShiftLeft (Arg0, 16)), Local1), 4)
+ Field (SHO0, AnyAcc, NoLock, Preserve) {
+ TEMP, 32
+ }
+ Store (Arg2, TEMP)
+ }
+}
new file mode 100644
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+
+scope (\_SB.PCI0) {
+
+ /* LPIO1 PWM */
+ Device(PWM) {
+ Name (_ADR, 0x001A0000)
+ Name (_DDN, "Intel(R) PWM Controller")
+ }
+
+ /* LPIO1 HS-UART #1 */
+ Device(URT1) {
+ Name (_ADR, 0x00180000)
+ Name (_DDN, "Intel(R) HS-UART Controller #1")
+ }
+
+ /* LPIO1 HS-UART #2 */
+ Device(URT2) {
+ Name (_ADR, 0x00180001)
+ Name (_DDN, "Intel(R) HS-UART Controller #2")
+ }
+
+ /* LPIO1 HS-UART #3 */
+ Device(URT3) {
+ Name (_ADR, 0x00180002)
+ Name (_DDN, "Intel(R) HS-UART Controller #3")
+ }
+
+ /* LPIO1 HS-UART #4 */
+ Device(URT4) {
+ Name (_ADR, 0x00180003)
+ Name (_DDN, "Intel(R) HS-UART Controller #4")
+ }
+
+ /* LPIO1 SPI */
+ Device(SPI1) {
+ Name (_ADR, 0x00190000)
+ Name (_DDN, "Intel(R) SPI Controller #1")
+ }
+
+ /* LPIO1 SPI #2 */
+ Device(SPI2) {
+ Name (_ADR, 0x00190001)
+ Name (_DDN, "Intel(R) SPI Controller #2")
+ }
+
+ /* LPIO1 SPI #3 */
+ Device(SPI3) {
+ Name (_ADR, 0x00190002)
+ Name (_DDN, "Intel(R) SPI Controller #3")
+ }
+
+
+ /* LPIO2 I2C #0 */
+ Device(I2C0) {
+ Name (_ADR, 0x00160000)
+ Name (_DDN, "Intel(R) I2C Controller #0")
+ }
+
+ /* LPIO2 I2C #1 */
+ Device(I2C1) {
+ Name (_ADR, 0x00160001)
+ Name (_DDN, "Intel(R) I2C Controller #1")
+ }
+
+ /* LPIO2 I2C #2 */
+ Device(I2C2) {
+ Name (_ADR, 0x00160002)
+ Name (_DDN, "Intel(R) I2C Controller #2")
+ }
+
+ /* LPIO2 I2C #3 */
+ Device(I2C3) {
+ Name (_ADR, 0x00160003)
+ Name (_DDN, "Intel(R) I2C Controller #3")
+ }
+
+ /* LPIO2 I2C #4 */
+ Device(I2C4) {
+ Name (_ADR, 0x00170000)
+ Name (_DDN, "Intel(R) I2C Controller #4")
+ }
+
+ /* LPIO2 I2C #5 */
+ Device(I2C5) {
+ Name (_ADR, 0x00170001)
+ Name (_DDN, "Intel(R) I2C Controller #5")
+ }
+
+ /* LPIO2 I2C #6 */
+ Device(I2C6) {
+ Name (_ADR, 0x00170002)
+ Name (_DDN, "Intel(R) I2C Controller #6")
+ }
+
+ /* LPIO2 I2C #7 */
+ Device(I2C7) {
+ Name (_ADR, 0x00170003)
+ Name (_DDN, "Intel(R) I2C Controller #7")
+ }
+}
new file mode 100644
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+
+ Name(_HID, EISAID("PNP0A08")) /* PCIe */
+ Name(_CID, EISAID("PNP0A03")) /* PCI */
+ Name(_BBN, 0)
+
+Device (MCHC)
+{
+ Name (_ADR, 0x00000000) /*Dev0 Func0 */
+
+ OperationRegion (MCHP, PCI_Config, 0x00, 0x100)
+ Field (MCHP, DWordAcc, NoLock, Preserve)
+ {
+ Offset(0x60),
+ MCNF, 32, /* PCI MMCONF base */
+ Offset (0xA8),
+ TUUD, 64, /* Top of Upper Used Memory */
+ Offset(0xB4),
+ BGSM, 32, /* Base of Graphics Stolen Memory */
+ Offset(0xBC),
+ TLUD, 32, /* Top of Low Useable DRAM */
+ }
+}
+Name (MCRS, ResourceTemplate()
+{
+ /* Bus Numbers */
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,,)
+
+ /* IO Region 0 */
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,,)
+
+ /* PCI Config Space */
+ Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
+
+ /* IO Region 1 */
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, 0x01000, 0xffff, 0x0000, 0xf000,,,)
+
+ /* VGA memory (0xa0000-0xbffff) */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
+ 0x00020000,,,)
+
+ /* Data and GFX stolen memory */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x3be00000, 0x3fffffff, 0x00000000,
+ 0x04200000,,, STOM)
+
+ /*
+ * PCI MMIO Region (TOLUD - PCI extended base MMCONF)
+ * This assumes that MMCONF is placed after PCI config space,
+ * and that no resources are allocated after the MMCONF region.
+ * This works, sicne MMCONF is hardcoded to 0xe00000000.
+ */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ NonCacheable, ReadWrite,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000,,, PM01)
+
+ /* PCI Memory Region (TOUUD - (TOUUD + ABOVE_4G_MMIO_SIZE)) */
+ QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ NonCacheable, ReadWrite,
+ 0x00000000, 0x10000, 0x1ffff, 0x00000000,
+ 0x10000,,, PM02)
+})
+
+/* Current Resource Settings */
+Method (_CRS, 0, Serialized)
+{
+
+ /* Find PCI resource area in MCRS */
+ CreateDwordField (MCRS, ^PM01._MIN, PMIN)
+ CreateDwordField (MCRS, ^PM01._MAX, PMAX)
+ CreateDwordField (MCRS, ^PM01._LEN, PLEN)
+
+ /* Read C-Unit PCI CFG Reg. 0xBC for TOLUD (shadow from B-Unit) */
+ And(^MCHC.TLUD, 0xFFF00000, PMIN)
+ /* Read MMCONF base */
+ And(^MCHC.MCNF, 0xF0000000, PMAX)
+
+ /* Calculate PCI MMIO Length */
+ Add(Subtract(PMAX, PMIN), 1, PLEN)
+
+ /* Find GFX resource area in GCRS */
+ CreateDwordField(MCRS, ^STOM._MIN, GMIN)
+ CreateDwordField(MCRS, ^STOM._MAX, GMAX)
+ CreateDwordField(MCRS, ^STOM._LEN, GLEN)
+
+ /* Read BGSM */
+ And(^MCHC.BGSM, 0xFFF00000, GMIN)
+
+ /* Read TOLUD */
+ And(^MCHC.TLUD, 0xFFF00000, GMAX)
+ Decrement(GMAX)
+ Add(Subtract(GMAX, GMIN), 1, GLEN)
+
+ /* Patch PM02 range based on Memory Size */
+ CreateQwordField (MCRS, ^PM02._MIN, MMIN)
+ CreateQwordField (MCRS, ^PM02._MAX, MMAX)
+ CreateQwordField (MCRS, ^PM02._LEN, MLEN)
+
+ Store (^MCHC.TUUD, Local0)
+
+ If (LLessEqual (Local0, 0x1000000000))
+ {
+ Store (0, MMIN)
+ Store (0, MLEN)
+ }
+ Subtract (Add (MMIN, MLEN), 1, MMAX)
+
+ Return (MCRS)
+}
new file mode 100644
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ * Copyright (C) 2016 Google Inc.
+ *
+ */
+
+/* Audio Controller - Device 14, Function 0 */
+
+Device (HDAS)
+{
+ Name (_ADR, 0x000E0000)
+ Name (_DDN, "Audio Controller")
+ Name (UUID, ToUUID("A69F886E-6CEB-4594-A41F-7B5DCE24C553"))
+
+ /* Device is D3 wake capable */
+ Name (_S0W, 3)
+
+ /* NHLT Table Address populated from GNVS values */
+ Name (NBUF, ResourceTemplate() {
+ QWordMemory (ResourceConsumer, PosDecode, MinFixed,
+ MaxFixed, Cacheable, ReadOnly,
+ 0, 0, 0, 0, 1,,, NHLT, AddressRangeACPI)
+ }
+ )
+
+ /* can wake up from S3 state */
+ Name (_PRW, Package() { GPE0A_AVS_PME_STS, 3 })
+
+ /*
+ * Device Specific Method
+ * Arg0 - UUID
+ * Arg1 - Revision
+ * Arg2 - Function Index
+ */
+ Method (_DSM, 4) {
+ If (LEqual (Arg0, ^UUID)) {
+ /*
+ * Function 0: Function Support Query
+ * Returns a bitmask of functions supported.
+ */
+ If (LEqual (Arg2, Zero)) {
+ /*
+ * NHLT Query only supported for revision 1 and
+ * if NHLT address and length are set in NVS.
+ */
+ If (LAnd (LEqual (Arg1, One),
+ LAnd (LNotEqual (NHLA, Zero),
+ LNotEqual (NHLL, Zero)))) {
+ Return (Buffer (One) { 0x03 })
+ }
+ Else {
+ Return (Buffer (One) { 0x01 })
+ }
+ }
+
+ /*
+ * Function 1: Query NHLT memory address used by
+ * Intel Offload Engine Driver to discover any non-HDA
+ * devices that are supported by the DSP.
+ *
+ * Returns a pointer to NHLT table in memory.
+ */
+ If (LEqual (Arg2, One)) {
+ CreateQWordField (NBUF, ^NHLT._MIN, NBAS)
+ CreateQWordField (NBUF, ^NHLT._MAX, NMAS)
+ CreateQWordField (NBUF, ^NHLT._LEN, NLEN)
+ Store (NHLA, NBAS)
+ Store (NHLA, NMAS)
+ Store (NHLL, NLEN)
+ Return (NBUF)
+ }
+ }
+
+ Return (Buffer (One) { 0x00 })
+ }
+}
new file mode 100644
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+
+#include "soc_int.asl"
+
+Method(_PRT)
+{
+ Return(Package() {
+
+ Package(){0x0000FFFF, 0, 0, NPK_INT},
+ Package(){0x0000FFFF, 1, 0, PUNIT_INT},
+ Package(){0x0002FFFF, 0, 0, GEN_INT},
+ Package(){0x0003FFFF, 0, 0, IUNIT_INT},
+ Package(){0x000DFFFF, 1, 0, PMC_INT},
+ Package(){0x000EFFFF, 0, 0, AUDIO_INT},
+ Package(){0x000FFFFF, 0, 0, CSE_INT},
+ Package(){0x0011FFFF, 0, 0, ISH_INT},
+ Package(){0x0012FFFF, 0, 0, SATA_INT},
+ Package(){0x0013FFFF, 0, 0, PIRQA_INT},
+ Package(){0x0013FFFF, 1, 0, PIRQB_INT},
+ Package(){0x0013FFFF, 2, 0, PIRQC_INT},
+ Package(){0x0013FFFF, 3, 0, PIRQD_INT},
+ Package(){0x0014FFFF, 0, 0, PIRQB_INT},
+ Package(){0x0014FFFF, 1, 0, PIRQC_INT},
+ Package(){0x0014FFFF, 2, 0, PIRQD_INT},
+ Package(){0x0014FFFF, 3, 0, PIRQA_INT},
+ Package(){0x0015FFFF, 0, 0, XHCI_INT},
+ Package(){0x0015FFFF, 1, 0, XDCI_INT},
+ Package(){0x0016FFFF, 0, 0, I2C0_INT},
+ Package(){0x0016FFFF, 1, 0, I2C1_INT},
+ Package(){0x0016FFFF, 2, 0, I2C2_INT},
+ Package(){0x0016FFFF, 3, 0, I2C3_INT},
+ Package(){0x0017FFFF, 0, 0, I2C4_INT},
+ Package(){0x0017FFFF, 1, 0, I2C5_INT},
+ Package(){0x0017FFFF, 2, 0, I2C6_INT},
+ Package(){0x0017FFFF, 3, 0, I2C7_INT},
+ Package(){0x0018FFFF, 0, 0, UART0_INT},
+ Package(){0x0018FFFF, 1, 0, UART1_INT},
+ Package(){0x0018FFFF, 2, 0, UART2_INT},
+ Package(){0x0018FFFF, 3, 0, UART3_INT},
+ Package(){0x0019FFFF, 0, 0, SPI0_INT},
+ Package(){0x0019FFFF, 1, 0, SPI1_INT},
+ Package(){0x0019FFFF, 2, 0, SPI2_INT},
+ Package(){0x001BFFFF, 0, 0, SDCARD_INT},
+ Package(){0x001CFFFF, 0, 0, EMMC_INT},
+ Package(){0x001EFFFF, 0, 0, SDIO_INT},
+ Package(){0x001FFFFF, 1, 0, SMBUS_INT},
+ })
+}
new file mode 100644
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation
+ */
+
+/* PCIe Ports */
+
+Device (RP01)
+{
+ Name (_ADR, 0x00140000)
+ Name (_DDN, "PCIe-B 0")
+
+ #include "pcie_port.asl"
+}
+
+Device (RP03)
+{
+ Name (_ADR, 0x00130000)
+ Name (_DDN, "PCIe-A 0")
+
+ #include "pcie_port.asl"
+}
new file mode 100644
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation
+ */
+
+/* Include in each PCIe Root Port device */
+
+/* lowest D-state supported by
+ * PCIe root port during S0 state
+ */
+Name (_S0W, 4)
+
+Name (PDST, 0) /* present Detect status */
+
+/* Dynamic Opregion needed to access registers
+ * when the controller is in D3 cold
+ */
+OperationRegion (PX01, PCI_Config, 0x00, 0xFF)
+Field (PX01, AnyAcc, NoLock, Preserve)
+{
+ Offset(0x5A),
+ , 6,
+ PDS, 1, /* 6, Presence detect Change */
+ Offset(0xE2), /* RPPGEN - Root Port Power Gating Enable */
+ , 2,
+ L23E, 1, /* 2, L23_Rdy Entry Request (L23ER) */
+ L23R, 1, /* 3, L23_Rdy to Detect Transition (L23R2DT) */
+ Offset(0xF4), /* BLKPLLEN */
+ , 10,
+ BPLL, 1,
+}
+
+OperationRegion (PX02, PCI_Config, 0x338, 0x4)
+Field (PX02, AnyAcc, NoLock, Preserve)
+{
+ , 26,
+ BDQA, 1 /* BLKDQDA */
+}
+
+PowerResource (PXP, 0, 0)
+{
+ /* Define the PowerResource for PCIe slot */
+ Method (_STA, 0, Serialized)
+ {
+ Store (PDS, PDST)
+ If (LEqual (PDS, 1)) {
+ Return (0xf)
+ } Else {
+ Return (0)
+ }
+ }
+
+ Method (_ON, 0, Serialized)
+ {
+ If (LAnd (LEqual (PDST, 1), LNotEqual (\PRT0, 0))) {
+ /* Enter this condition if device
+ * is connected
+ */
+
+ /* De-assert PERST */
+ \_SB.PCI0.PRDA (\PRT0)
+
+ Store (0, BDQA) /* Set BLKDQDA to 0 */
+ Store (0, BPLL) /* Set BLKPLLEN to 0 */
+
+ /* Set L23_Rdy to Detect Transition
+ * (L23R2DT)
+ */
+ Store (1, L23R)
+ Sleep (16)
+ Store (0, Local0)
+
+ /* Delay for transition Detect
+ * and link to train
+ */
+ While (L23R) {
+ If (Lgreater (Local0, 4)) {
+ Break
+ }
+ Sleep (16)
+ Increment (Local0)
+ }
+ } /* End PDS condition check */
+ }
+
+ Method (_OFF, 0, Serialized)
+ {
+ /* Set L23_Rdy Entry Request (L23ER) */
+ If (LAnd (LEqual (PDST, 1), LNotEqual (\PRT0, 0))) {
+ /* enter this condition if device
+ * is connected
+ */
+ Store (1, L23E)
+ Sleep (16)
+ Store (0, Local0)
+ While (L23E) {
+ If (Lgreater (Local0, 4)) {
+ Break
+ }
+ Sleep (16)
+ Increment (Local0)
+ }
+ Store (1, BDQA) /* Set BLKDQDA to 1 */
+ Store (1, BPLL) /* Set BLKPLLEN to 1 */
+
+ /* Assert PERST */
+ \_SB.PCI0.PRAS (\PRT0)
+ } /* End PDS condition check */
+ } /* End of Method_OFF */
+} /* End PXP */
+
+Name(_PR0, Package() { PXP })
+Name(_PR3, Package() { PXP })
new file mode 100644
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ * Copyright (C) 2016 Intel Corp
+ */
+
+/* Enable ACPI _SWS methods */
+#include <soc/intel/common/acpi/acpi_wake_source.asl>
+#include <soc/intel/common/acpi/platform.asl>
new file mode 100644
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ */
+
+#include <asm/arch/iomap.h>
+
+#define MAILBOX_DATA 0x7080
+#define MAILBOX_INTF 0x7084
+#define PMIO_LENGTH 0x80
+#define PMIO_LIMIT 0x480
+
+scope (\_SB) {
+ Device (IPC1)
+ {
+ Name (_HID, "INT34D2")
+ Name (_CID, "INT34D2")
+ Name (_DDN, "Intel(R) IPC1 Controller")
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x0, 0x2000, IBAR)
+ Memory32Fixed (ReadWrite, 0x0, 0x4, MDAT)
+ Memory32Fixed (ReadWrite, 0x0, 0x4, MINF)
+ IO (Decode16, IOMAP_ACPI_BASE, PMIO_LIMIT,
+ 0x04, PMIO_LENGTH)
+ Memory32Fixed (ReadWrite, 0x0, 0x2000, SBAR)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , )
+ {
+ PMC_INT
+ }
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField (^RBUF, ^IBAR._BAS, IBAS)
+ Store (PMC_BAR0, IBAS)
+
+ CreateDwordField (^RBUF, ^MDAT._BAS, MDBA)
+ Store (MCH_BASE_ADDRESS + MAILBOX_DATA, MDBA)
+ CreateDwordField (^RBUF, ^MINF._BAS, MIBA)
+ Store (MCH_BASE_ADDRESS + MAILBOX_INTF, MIBA)
+
+ CreateDwordField (^RBUF, ^SBAR._BAS, SBAS)
+ Store (SRAM_BASE_0, SBAS)
+
+ Return (^RBUF)
+ }
+ }
+}
new file mode 100644
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+Scope (\_SB.PCI0) {
+ /* 0xD6- is the port address */
+ /* 0x600- is the dynamic clock gating control register offset (GENR) */
+ OperationRegion (SBMM, SystemMemory,
+ Or ( Or (IOMAP_P2SB_BAR,
+ ShiftLeft(0xD6, PCR_PORTID_SHIFT)), 0x0600), 0x18)
+ Field (SBMM, DWordAcc, NoLock, Preserve)
+ {
+ GENR, 32,
+ Offset (0x08),
+ , 5, /* bit[5] represents Force Card Detect SD Card */
+ GRR3, 1, /* GPPRVRW3 for SD Card detect Bypass. It's active high */
+ }
+
+ /* SCC power gate control method, this method must be serialized as
+ * multiple device will control the GENR register
+ *
+ * Arguments: (2)
+ * Arg0: 0-AND 1-OR
+ * Arg1: Value
+ */
+ Method (SCPG, 2, Serialized)
+ {
+ if (LEqual(Arg0, 0x1)) {
+ Or (^GENR, Arg1, ^GENR)
+ } ElseIf (LEqual(Arg0, 0x0)){
+ And (^GENR, Arg1, ^GENR)
+ }
+ }
+
+ /* eMMC */
+ Device (SDHA) {
+ Name (_ADR, 0x001C0000)
+ Name (_DDN, "Intel(R) eMMC Controller - 80865ACC")
+ Name (UUID, ToUUID ("E5C937D0-3553-4D7A-9117-EA4D19C3434D"))
+
+ /*
+ * Device Specific Method
+ * Arg0 - UUID
+ * Arg1 - Revision
+ * Arg2 - Function Index
+ */
+ Method (_DSM, 4)
+ {
+ If (LEqual (Arg0, ^UUID)) {
+ /*
+ * Function 9: Device Readiness Durations
+ * Returns a package of five integers covering
+ * various device related delays in PCIe Base Spec.
+ */
+ If (LEqual (Arg2, 9)) {
+ /*
+ * Function 9 support for revision 3.
+ * ECN link for function definitions
+ * [https://pcisig.com/sites/default/files/
+ * specification_documents/
+ * ECN_fw_latency_optimization_final.pdf]
+ */
+ If (LEqual (Arg1, 3)) {
+ /*
+ * Integer 0: FW reset time.
+ * Integer 1: FW data link up time.
+ * Integer 2: FW functional level reset
+ * time.
+ * Integer 3: FW D3 hot to D0 time.
+ * Integer 4: FW VF enable time.
+ * set ACPI constant Ones for elements
+ * where overriding the default value
+ * is not desired.
+ */
+ Return (Package (5) {0, Ones, Ones,
+ Ones, Ones})
+ }
+ }
+ }
+ Return (Buffer() { 0x00 })
+ }
+
+ Method (_PS0, 0, NotSerialized)
+ {
+ /* Clear clock gate
+ * Clear bit 6 and 0
+ */
+ ^^SCPG(0,0xFFFFFFBE)
+ /* Sleep 2 ms */
+ Sleep (2)
+ }
+
+ Method (_PS3, 0, NotSerialized)
+ {
+ /* Enable power gate
+ * Restore clock gate
+ * Restore bit 6 and 0
+ */
+ ^^SCPG(1,0x00000041)
+ }
+
+ Device (CARD)
+ {
+ Name (_ADR, 0x00000008)
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (0)
+ }
+ }
+ } /* Device (SDHA) */
+
+ /* SD CARD */
+ Device (SDCD)
+ {
+ Name (_ADR, 0x001B0000)
+ Name (_S0W, 4) /* _S0W: S0 Device Wake State */
+ Name (SCD0, 0) /* Store SD_CD DW0 address */
+
+ /* Set the host ownership of sdcard cd during kernel boot */
+ Method (_INI, 0)
+ {
+ /* Check SDCard CD port is valid */
+ If (LAnd (LNotEqual (\SCDP, 0), LNotEqual (\SCDO, 0) ))
+ {
+ /* Store DW0 address of SD_CD */
+ Store (GDW0 (\SCDP, \SCDO), SCD0)
+ /* Get the current SD_CD ownership */
+ Store (\_SB.GHO (\SCDP, \SCDO), Local0)
+ /* Set host ownership as GPIO in HOSTSW_OWN reg */
+ Or (Local0, ShiftLeft (1, Mod (\SCDO, 32)), Local0)
+ \_SB.SHO (\SCDP, \SCDO, Local0)
+ }
+ }
+
+ Method (_PS0, 0, NotSerialized)
+ {
+ /* Check SDCard CD port is valid */
+ If (LAnd (LNotEqual (\SCDP, 0), LNotEqual (\SCDO, 0) ))
+ {
+ /* Store DW0 into local0 to get rxstate of GPIO */
+ Store (\_SB.GPC0 (SCD0), Local0)
+ /* Extract rxstate [bit 1] of sdcard card detect pin */
+ And (Local0, PAD_CFG0_RX_STATE, Local0)
+ /* If the sdcard is present, rxstate is low.
+ * If sdcard is not present, rxstate is High.
+ * Write the inverted value of rxstate to GRR3.
+ */
+ If (LEqual (Local0, 0)) {
+ Store (1, ^^GRR3)
+ } Else {
+ Store (0, ^^GRR3)
+ }
+ Sleep (2)
+ }
+ }
+
+ Method (_PS3, 0, NotSerialized)
+ {
+ /* Clear GRR3 to Power Gate SD Controller */
+ Store (0, ^^GRR3)
+ }
+
+ Device (CARD)
+ {
+ Name (_ADR, 0x00000008)
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (1)
+ }
+ }
+ } /* Device (SDCD) */
+}
new file mode 100644
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+
+#ifndef _SOC_INT_DEFINE_ASL_
+#define _SOC_INT_DEFINE_ASL_
+
+#define SDCARD_INT 3 /* Need to be shared by PMC and SCC only*/
+#define UART0_INT 4 /* Need to be shared by PMC and SCC only*/
+#define UART1_INT 5 /* Need to be shared by PMC and SCC only*/
+#define UART2_INT 6 /* Need to be shared by PMC and SCC only*/
+#define UART3_INT 7 /* Need to be shared by PMC and SCC only*/
+#define XDCI_INT 13 /* Need to be shared by PMC and SCC only*/
+#define GPIO_BANK_INT 14
+#define NPK_INT 16
+#define PIRQA_INT 16
+#define PIRQB_INT 17
+#define PIRQC_INT 18
+#define SATA_INT 19
+#define GEN_INT 19
+#define PIRQD_INT 19
+#define XHCI_INT 17 /* Need to be shared by PMC and SCC only*/
+#define SMBUS_INT 20 /* PIRQE */
+#define CSE_INT 20 /* PIRQE */
+#define IUNIT_INT 21 /* PIRQF */
+#define PIRQF_INT 21
+#define PIRQG_INT 22
+#define PUNIT_INT 24
+#define AUDIO_INT 25
+#define ISH_INT 26
+#define I2C0_INT 27
+#define I2C1_INT 28
+#define I2C2_INT 29
+#define I2C3_INT 30
+#define I2C4_INT 31
+#define I2C5_INT 32
+#define I2C6_INT 33
+#define I2C7_INT 34
+#define SPI0_INT 35
+#define SPI1_INT 36
+#define SPI2_INT 37
+#define UFS_INT 38
+#define EMMC_INT 39
+#define PMC_INT 40
+#define SDIO_INT 42
+#define CNVI_INT 44
+
+#endif /* _SOC_INT_DEFINE_ASL_ */
new file mode 100644
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao at intel.com> for Intel Corp.)
+ */
+
+#include <p2sb.h>
+#include <asm/arch/gpe.h>
+
+/* PCIE device */
+#include "pcie.asl"
+
+/* LPSS device */
+#include "lpss.asl"
+
+/* PCI IRQ assignment */
+#include "pci_irqs.asl"
+
+/* GPIO controller */
+#include "gpio.asl"
+
+#include "xhci.asl"
+
+/* LPC */
+#include <asm/acpi/lpc.asl>
+
+/* eMMC */
+#include "scs.asl"
+
+/* PMC IPC controller */
+#include "pmc_ipc.asl"
+
+/* PCI _OSC */
+#include <asm/acpi/pci_osc.asl>
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+/* XHCI Controller 0:15.0 */
+Device (XHCI) {
+ Name (_ADR, 0x00150000) /* Device 21, Function 0 */
+
+ Name (_S3D, 3) /* D3 supported in S3 */
+ Name (_S0W, 3) /* D3 can wake device in S0 */
+ Name (_S3W, 3) /* D3 can wake system from S3 */
+
+ /* Declare XHCI GPE status and enable bits are bit 13 */
+ Name (_PRW, Package() { GPE0A_XHCI_PME_STS, 3 })
+
+ Method (_STA, 0)
+ {
+ Return (0xF)
+ }
+
+ Device (RHUB)
+ {
+ /* Root Hub */
+ Name (_ADR, Zero)
+
+#if IS_ENABLED(CONFIG_SOC_INTEL_GLK)
+#include "xhci_glk_ports.asl"
+#else
+#include "xhci_apl_ports.asl"
+#endif
+ }
+}
new file mode 100644
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Google LLC.
+ * Copyright 2019 Intel Corp.
+ */
+
+/* USB2 */
+Device (HS01) { Name (_ADR, 1) }
+Device (HS02) { Name (_ADR, 2) }
+Device (HS03) { Name (_ADR, 3) }
+Device (HS04) { Name (_ADR, 4) }
+Device (HS05) { Name (_ADR, 5) }
+Device (HS06) { Name (_ADR, 6) }
+Device (HS07) { Name (_ADR, 7) }
+Device (HS08) { Name (_ADR, 8) }
+
+/* USB3 */
+Device (SS01) { Name (_ADR, 9) }
+Device (SS02) { Name (_ADR, 10) }
+Device (SS03) { Name (_ADR, 11) }
+Device (SS04) { Name (_ADR, 12) }
+Device (SS05) { Name (_ADR, 13) }
+Device (SS06) { Name (_ADR, 14) }
new file mode 100644
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Google LLC.
+ * Copyright 2019 Intel Corp.
+ */
+
+/* USB2 */
+Device (HS01) { Name (_ADR, 1) }
+Device (HS02) { Name (_ADR, 2) }
+Device (HS03) { Name (_ADR, 3) }
+Device (HS04) { Name (_ADR, 4) }
+Device (HS05) { Name (_ADR, 5) }
+Device (HS06) { Name (_ADR, 6) }
+Device (HS07) { Name (_ADR, 7) }
+Device (HS08) { Name (_ADR, 8) }
+Device (HS09) { Name (_ADR, 9) }
+
+/* USB3 */
+Device (SS01) { Name (_ADR, 10) }
+Device (SS02) { Name (_ADR, 11) }
+Device (SS03) { Name (_ADR, 12) }
+Device (SS04) { Name (_ADR, 13) }
+Device (SS05) { Name (_ADR, 14) }
+Device (SS06) { Name (_ADR, 15) }
Add Apollo Lake ASL files, taken from coreboot. Signed-off-by: Simon Glass <sjg at chromium.org> --- .../include/asm/arch-apollolake/acpi/dptf.asl | 35 ++++ .../asm/arch-apollolake/acpi/globalnvs.asl | 41 ++++ .../include/asm/arch-apollolake/acpi/gpio.asl | 191 ++++++++++++++++++ .../asm/arch-apollolake/acpi/gpiolib.asl | 109 ++++++++++ .../include/asm/arch-apollolake/acpi/lpss.asl | 105 ++++++++++ .../asm/arch-apollolake/acpi/northbridge.asl | 120 +++++++++++ .../asm/arch-apollolake/acpi/pch_hda.asl | 77 +++++++ .../asm/arch-apollolake/acpi/pci_irqs.asl | 52 +++++ .../include/asm/arch-apollolake/acpi/pcie.asl | 22 ++ .../asm/arch-apollolake/acpi/pcie_port.asl | 113 +++++++++++ .../asm/arch-apollolake/acpi/platform.asl | 10 + .../asm/arch-apollolake/acpi/pmc_ipc.asl | 49 +++++ .../include/asm/arch-apollolake/acpi/scs.asl | 173 ++++++++++++++++ .../asm/arch-apollolake/acpi/soc_int.asl | 50 +++++ .../asm/arch-apollolake/acpi/southbridge.asl | 34 ++++ .../include/asm/arch-apollolake/acpi/xhci.asl | 33 +++ .../arch-apollolake/acpi/xhci_apl_ports.asl | 23 +++ .../arch-apollolake/acpi/xhci_glk_ports.asl | 24 +++ 18 files changed, 1261 insertions(+) create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/dptf.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/globalnvs.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/gpio.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/gpiolib.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/lpss.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/northbridge.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/pch_hda.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/pci_irqs.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/pcie.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/pcie_port.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/platform.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/pmc_ipc.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/scs.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/soc_int.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/southbridge.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/xhci.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/xhci_apl_ports.asl create mode 100644 arch/x86/include/asm/arch-apollolake/acpi/xhci_glk_ports.asl