@@ -16,6 +16,64 @@
serial2 = &main_uart0;
ethernet0 = &cpsw_port1;
};
+
+ /* Dual Ethernet application node on PRU-ICSSG2 */
+ pruss2_eth: pruss2_eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_rgmii_pins_default>;
+ sram = <&icssg2_sram>;
+ clocks = <&k3_clks 64 3>;
+ clock-names = "mdio_fck";
+ u-boot,dm-spl;
+
+ prus = <&pru2_0>, <&rtu2_0>, <&pru2_1>, <&rtu2_1>;
+ firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-rtu1-prueth-fw.elf";
+ mii-g-rt = <&icssg2_mii_g_rt>;
+ mii-rt = <&icssg2_mii_rt>;
+ dma-coherent;
+ dmas = <&mcu_udmap &icssg2 0 UDMA_DIR_TX>, /* egress slice 0 */
+ <&mcu_udmap &icssg2 1 UDMA_DIR_TX>, /* egress slice 0 */
+ <&mcu_udmap &icssg2 2 UDMA_DIR_TX>, /* egress slice 0 */
+ <&mcu_udmap &icssg2 3 UDMA_DIR_TX>, /* mgmnt cmd slice 0 */
+ <&mcu_udmap &icssg2 4 UDMA_DIR_TX>, /* egress slice 1 */
+ <&mcu_udmap &icssg2 5 UDMA_DIR_TX>, /* egress slice 1 */
+ <&mcu_udmap &icssg2 6 UDMA_DIR_TX>, /* egress slice 1 */
+ <&mcu_udmap &icssg2 7 UDMA_DIR_TX>, /* mgmnt cmd slice 1 */
+
+ <&mcu_udmap &icssg2 0 UDMA_DIR_RX>, /* ingress slice 0 */
+ <&mcu_udmap &icssg2 1 UDMA_DIR_RX>, /* ingress slice 1 */
+ <&mcu_udmap &icssg2 2 UDMA_DIR_RX>, /* mgmnt rsp slice 0 */
+ <&mcu_udmap &icssg2 3 UDMA_DIR_RX>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1",
+ "rxmgm0", "rxmgm1";
+
+ pruss2_emac0: ethernet-mii0 {
+ phy-handle = <&pruss2_eth0_phy>;
+ phy-mode = "rgmii-rxid";
+ syscon-rgmii-delay = <&scm_conf 0x4120>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+/*
+ * Commenting out the second mii interface as the framework
+ * supports one interface in a single probe
+ * So either mii1 or mii2 can be used. In case mii1 is needed
+ * uncomment mii1 and comment out mii0
+ pruss2_emac1: ethernet-mii1 {
+ phy-handle = <&pruss2_eth1_phy>;
+ phy-mode = "rgmii-rxid";
+ syscon-rgmii-delay = <&scm_conf 0x4124>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+*/
+ };
};
&cbass_main{
@@ -275,6 +333,47 @@
u-boot,dm-spl;
};
+ icssg2_rgmii_pins_default: icssg2_rgmii_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+ AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+ AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+ AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+ AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+ AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+ AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+ AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+ AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+ AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+ AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+ AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+ AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+ AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+ AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+ AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+ AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+ AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+ AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+ AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+ /* HACK to get MDIO Pins in the right state */
+ AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+ AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+ >;
+ u-boot,dm-spl;
+ };
+
+ icssg2_mdio_pins_default: icssg2_mdio_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+ AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+ >;
+ u-boot,dm-spl;
+ };
};
&main_pmx1 {
@@ -377,3 +476,21 @@
reg = <0x60000 0x10000>;
};
};
+
+&icssg2_mdio{
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_mdio_pins_default>;
+
+ pruss2_eth0_phy: ethernet-phy at 0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ pruss2_eth1_phy: ethernet-phy at 3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
ICSSG2 provide dual Gigabit Ethernet support. Currently mdio clock is part of this node and also the icssg2_rgmii_pins_default pinmux node has the mdio pins as there is no davinci mdio driver. Currently icssg2 instances are supported. Either mii0 or mii1 can be enabled at a time. Signed-off-by: Keerthy <j-keerthy at ti.com> --- Changes in v2: * Removed a bunch of inconsistent white space in pins definition. arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 117 +++++++++++++++++++ 1 file changed, 117 insertions(+)