From patchwork Wed Feb 26 08:14:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Faiz Abbas X-Patchwork-Id: 236845 List-Id: U-Boot discussion From: faiz_abbas at ti.com (Faiz Abbas) Date: Wed, 26 Feb 2020 13:44:37 +0530 Subject: [PATCH v3 09/11] arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocks In-Reply-To: <20200226081439.15994-1-faiz_abbas@ti.com> References: <20200226081439.15994-1-faiz_abbas@ti.com> Message-ID: <20200226081439.15994-10-faiz_abbas@ti.com> Update the dummy clock names to use unique identifiers. Otherwise the previous node just gets overwitten by the next one with the same name. This fixes eMMC boot not working on J721e-evm. Signed-off-by: Faiz Abbas --- arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index eb577cdbc6..5973e211c3 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -34,14 +34,14 @@ u-boot,dm-spl; }; - clk_200mhz: dummy_clock { + clk_200mhz: dummy_clock_200mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; u-boot,dm-spl; }; - clk_19_2mhz: dummy_clock { + clk_19_2mhz: dummy_clock_19_2mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>;