diff mbox series

[2/5] am335x, guardian: boot stage feedback in headless mode

Message ID 20200325064548.31924-3-BollavarapuMoses.Christopher@in.bosch.com
State Accepted
Commit f2330691d9c1fd75b135a909d4bf5d17576e897b
Headers show
Series [1/5] am335x, guardian: fix spl usb-eth boot | expand

Commit Message

Moses Christopher March 25, 2020, 6:45 a.m. UTC
This patch enables the guardian board to provide feedback
  about the boot stage in headless mode. The on-board led
  would behave in the following pattern

    * U-boot -> GLOW LED
    * Linux  -> BLINK LED [HEART-BEAT PATTERN]

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher at in.bosch.com>
---
 arch/arm/dts/am335x-guardian.dts  | 2 +-
 board/bosch/guardian/board.c      | 4 ++++
 configs/am335x_guardian_defconfig | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/am335x-guardian.dts b/arch/arm/dts/am335x-guardian.dts
index 5ed2133e78..b554be97a3 100644
--- a/arch/arm/dts/am335x-guardian.dts
+++ b/arch/arm/dts/am335x-guardian.dts
@@ -58,7 +58,7 @@ 
 			label = "guardian:life-led";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
-			default-state = "off";
+			default-state = "on";
 		};
 	};
 
diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index 32ebaf4231..03ba9e8c5e 100644
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -14,6 +14,7 @@ 
 #include <env_internal.h>
 #include <errno.h>
 #include <i2c.h>
+#include <led.h>
 #include <miiphy.h>
 #include <panel.h>
 #include <power/tps65217.h>
@@ -232,6 +233,9 @@  err:
 
 int board_late_init(void)
 {
+#ifdef CONFIG_LED_GPIO
+	led_default_state();
+#endif
 	set_bootmode_env();
 	return 0;
 }
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index eb2d221f4c..942530d76e 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -37,6 +37,7 @@  CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x0
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LED is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -58,6 +59,8 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_ENV=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y