From patchwork Tue Mar 31 17:51:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 244676 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Tue, 31 Mar 2020 19:51:31 +0200 Subject: [PATCH V3 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII In-Reply-To: <20200331175136.205020-1-marex@denx.de> References: <20200331175136.205020-1-marex@denx.de> Message-ID: <20200331175136.205020-10-marex@denx.de> Add another mux option for DWMAC RGMII, this is used on AV96 board. Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut Cc: Manivannan Sadhasivam Cc: Patrick Delaunay Cc: Patrice Chotard --- V2: No change V3: No change --- arch/arm/dts/stm32mp157-pinctrl.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 964e4910ec..422dad1ddd 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -288,6 +288,57 @@ }; }; + ethernet0_rgmii_pins_b: rgmii-1 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = , /* FMC_NOE */