From patchwork Mon Apr 27 06:52:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chen-Yu Tsai X-Patchwork-Id: 238572 List-Id: U-Boot discussion From: wens at kernel.org (Chen-Yu Tsai) Date: Mon, 27 Apr 2020 14:52:46 +0800 Subject: [PATCH v3 1/9] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi In-Reply-To: <20200427065254.15397-1-wens@kernel.org> References: <20200427065254.15397-1-wens@kernel.org> Message-ID: <20200427065254.15397-2-wens@kernel.org> From: Chen-Yu Tsai USB 3.0 is only supported in U-boot, not in the Linux kernel where the device tree files are ultimately synced from. While the xhci node was moved, the external vbus regulator was not. Move it as well. Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi") Reviewed-by: Kever Yang Tested-by: Loic Devulder Tested-by: Peter Geis Signed-off-by: Chen-Yu Tsai --- Changes since v2: - none Changes since v1: - Added Kever's reviewed-by --- arch/arm/dts/rk3328-evb-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/rk3328-evb.dts | 9 --------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 4a827063c555..5679897279aa 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -6,6 +6,17 @@ #include "rk3328-u-boot.dtsi" #include "rk3328-sdram-ddr3-666.dtsi" +/{ + vcc5v0_host_xhci: vcc5v0-host-xhci-drv { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host_xhci"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + &usb_host0_xhci { vbus-supply = <&vcc5v0_host_xhci>; status = "okay"; diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index a2ee838fcd6b..e9bc849f8c23 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -38,15 +38,6 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_host_xhci: vcc5v0-host-xhci-drv { - compatible = "regulator-fixed"; - enable-active-high; - regulator-name = "vcc5v0_host_xhci"; - gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_phy";