@@ -111,6 +111,7 @@
int-array = <5678 9123 4567>;
str-value = "test string";
interrupts-extended = <&irq 3 0>;
+ acpi,name = "GHIJ";
};
junk {
@@ -17,6 +17,8 @@ the acpi,compatible property.
System) Device Name)
- acpi,hid : Contains the string to use as the HID (Hardware ID)
identifier _HID
+ - acpi,name : Provides the ACPI name for a device, which is a string consisting
+ of four alphanumeric character (upper case)
- acpi,uid : _UID value for device
- linux,probed : Tells U-Boot to add 'linux,probed' to the ACPI tables so that
Linux will only load the driver if the device can be detected (e.g. on I2C
@@ -34,3 +36,14 @@ elan_touchscreen: elan-touchscreen at 10 {
interrupts-extended = <&acpi_gpe GPIO_21_IRQ IRQ_TYPE_EDGE_FALLING>;
linux,probed;
};
+
+pcie-a0 at 14,0 {
+ reg = <0x0000a000 0 0 0 0>;
+ acpi,name = "RP01";
+ wifi: wifi {
+ compatible = "intel,generic-wifi";
+ acpi,ddn = "Intel WiFi";
+ acpi,name = "WF00";
+ interrupts-extended = <&acpi_gpe 0x3c 0>;
+ };
+};
@@ -9,9 +9,10 @@
#define LOG_CATEOGRY LOGC_ACPI
#include <common.h>
-#include <malloc.h>
#include <dm.h>
#include <log.h>
+#include <malloc.h>
+#include <acpi/acpi_device.h>
#include <dm/acpi.h>
#include <dm/device-internal.h>
#include <dm/root.h>
@@ -65,12 +66,20 @@ int acpi_copy_name(char *out_name, const char *name)
int acpi_get_name(const struct udevice *dev, char *out_name)
{
struct acpi_ops *aops;
+ const char *name;
+ int ret;
aops = device_get_acpi_ops(dev);
if (aops && aops->get_name)
return aops->get_name(dev, out_name);
+ name = dev_read_string(dev, "acpi,name");
+ if (name)
+ return acpi_copy_name(out_name, name);
+ ret = acpi_device_infer_name(dev, out_name);
+ if (ret)
+ return log_msg_ret("dev", ret);
- return -ENOSYS;
+ return 0;
}
/**
@@ -84,15 +84,6 @@ static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
return ops->xfer(emul, msg, nmsgs);
}
-static int sandbox_i2c_get_name(const struct udevice *dev, char *out_name)
-{
- return acpi_copy_name(out_name, "SI2C");
-}
-
-struct acpi_ops sandbox_i2c_acpi_ops = {
- .get_name = sandbox_i2c_get_name,
-};
-
static const struct dm_i2c_ops sandbox_i2c_ops = {
.xfer = sandbox_i2c_xfer,
};
@@ -108,5 +99,4 @@ U_BOOT_DRIVER(i2c_sandbox) = {
.of_match = sandbox_i2c_ids,
.ops = &sandbox_i2c_ops,
.priv_auto_alloc_size = sizeof(struct sandbox_i2c_priv),
- ACPI_OPS_PTR(&sandbox_i2c_acpi_ops)
};
@@ -134,15 +134,6 @@ static int sandbox_spi_get_mmap(struct udevice *dev, ulong *map_basep,
return 0;
}
-static int sandbox_spi_get_name(const struct udevice *dev, char *out_name)
-{
- return acpi_copy_name(out_name, "SSPI");
-}
-
-struct acpi_ops sandbox_spi_acpi_ops = {
- .get_name = sandbox_spi_get_name,
-};
-
static const struct dm_spi_ops sandbox_spi_ops = {
.xfer = sandbox_spi_xfer,
.set_speed = sandbox_spi_set_speed,
@@ -161,5 +152,4 @@ U_BOOT_DRIVER(spi_sandbox) = {
.id = UCLASS_SPI,
.of_match = sandbox_spi_ids,
.ops = &sandbox_spi_ops,
- ACPI_OPS_PTR(&sandbox_spi_acpi_ops)
};
@@ -383,4 +383,19 @@ int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val,
const struct gpio_desc *stop_gpio,
uint stop_delay_ms, uint stop_off_delay_ms);
+/**
+ * acpi_device_infer_name() - Infer the name from its uclass or parent
+ *
+ * Many ACPI devices have a standard name that can be inferred from the uclass
+ * they are in, of the uclass of their parent. These rules are implemented in
+ * this function. It attempts to produce a name for a device based on these
+ * rules.
+ *
+ * @dev: Device to check
+ * @out_name: Place to put the name (must hold ACPI_NAME_MAX bytes)
+ * @return 0 if a name was found, -ENOENT if not found, -ENXIO if the device
+ * sequence number could not be determined
+ */
+int acpi_device_infer_name(const struct udevice *dev, char *out_name);
+
#endif
@@ -10,6 +10,8 @@
#include <dm.h>
#include <irq.h>
#include <log.h>
+#include <usb.h>
+#include <acpi/acpigen.h>
#include <acpi/acpi_device.h>
#include <acpi/acpigen.h>
#include <asm-generic/gpio.h>
@@ -704,3 +706,107 @@ int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev)
return 0;
}
#endif /* CONFIG_SPI */
+
+static const char *acpi_name_from_id(enum uclass_id id)
+{
+ switch (id) {
+ case UCLASS_USB_HUB:
+ /* Root Hub */
+ return "RHUB";
+ /* DSDT: acpi/northbridge.asl */
+ case UCLASS_NORTHBRIDGE:
+ return "MCHC";
+ /* DSDT: acpi/lpc.asl */
+ case UCLASS_LPC:
+ return "LPCB";
+ /* DSDT: acpi/xhci.asl */
+ case UCLASS_USB:
+ return "XHCI";
+ case UCLASS_PWM:
+ return "PWM";
+ default:
+ return NULL;
+ }
+}
+
+static int acpi_check_seq(const struct udevice *dev)
+{
+ if (dev->req_seq == -1) {
+ log_warning("Device '%s' has no seq\n", dev->name);
+ return log_msg_ret("no seq", -ENXIO);
+ }
+
+ return dev->req_seq;
+}
+
+/* If you change this function, add test cases to dm_test_acpi_get_name() */
+int acpi_device_infer_name(const struct udevice *dev, char *out_name)
+{
+ enum uclass_id parent_id = UCLASS_INVALID;
+ enum uclass_id id;
+ const char *name = NULL;
+
+ id = device_get_uclass_id(dev);
+ if (dev_get_parent(dev))
+ parent_id = device_get_uclass_id(dev_get_parent(dev));
+
+ if (id == UCLASS_SOUND)
+ name = "HDAS";
+ else if (id == UCLASS_PCI)
+ name = "PCI0";
+ else if (device_is_on_pci_bus(dev))
+ name = acpi_name_from_id(id);
+ if (!name) {
+ switch (parent_id) {
+ case UCLASS_USB: {
+ struct usb_device *udev = dev_get_parent_priv(dev);
+
+ sprintf(out_name, udev->speed >= USB_SPEED_SUPER ?
+ "HS%02d" : "FS%02d",
+ udev->portnr);
+ name = out_name;
+ break;
+ }
+ default:
+ break;
+ }
+ }
+ if (!name) {
+ int num;
+
+ switch (id) {
+ /* DSDT: acpi/lpss.asl */
+ case UCLASS_SERIAL:
+ num = acpi_check_seq(dev);
+ if (num < 0)
+ return num;
+ sprintf(out_name, "URT%d", num);
+ name = out_name;
+ break;
+ case UCLASS_I2C:
+ num = acpi_check_seq(dev);
+ if (num < 0)
+ return num;
+ sprintf(out_name, "I2C%d", num);
+ name = out_name;
+ break;
+ case UCLASS_SPI:
+ num = acpi_check_seq(dev);
+ if (num < 0)
+ return num;
+ sprintf(out_name, "SPI%d", num);
+ name = out_name;
+ break;
+ default:
+ break;
+ }
+ }
+ if (!name) {
+ log_warning("No name for device '%s'\n", dev->name);
+ return -ENOENT;
+ }
+ if (name != out_name)
+ acpi_copy_name(out_name, name);
+
+ return 0;
+}
@@ -124,12 +124,52 @@ UCLASS_DRIVER(testacpi) = {
static int dm_test_acpi_get_name(struct unit_test_state *uts)
{
char name[ACPI_NAME_MAX];
- struct udevice *dev;
+ struct udevice *dev, *dev2, *i2c, *spi, *serial, *timer, *sound;
+ struct udevice *pci, *root;
+ /* Test getting the name from the driver */
ut_assertok(uclass_first_device_err(UCLASS_TEST_ACPI, &dev));
ut_assertok(acpi_get_name(dev, name));
ut_asserteq_str(ACPI_TEST_DEV_NAME, name);
+ /* Test getting the name from the device tree */
+ ut_assertok(uclass_get_device_by_name(UCLASS_TEST_FDT, "a-test",
+ &dev2));
+ ut_assertok(acpi_get_name(dev2, name));
+ ut_asserteq_str("GHIJ", name);
+
+ /* Test getting the name from acpi_device_get_name() */
+ ut_assertok(uclass_first_device(UCLASS_I2C, &i2c));
+ ut_assertok(acpi_get_name(i2c, name));
+ ut_asserteq_str("I2C0", name);
+
+ ut_assertok(uclass_first_device(UCLASS_SPI, &spi));
+ ut_assertok(acpi_get_name(spi, name));
+ ut_asserteq_str("SPI0", name);
+
+ /* The uart has no sequence number, so this should fail */
+ ut_assertok(uclass_first_device(UCLASS_SERIAL, &serial));
+ ut_asserteq(-ENXIO, acpi_get_name(serial, name));
+
+ /* ACPI doesn't know about the timer */
+ ut_assertok(uclass_first_device(UCLASS_TIMER, &timer));
+ ut_asserteq(-ENOENT, acpi_get_name(timer, name));
+
+ /* May as well test the rest of the cases */
+ ut_assertok(uclass_first_device(UCLASS_SOUND, &sound));
+ ut_assertok(acpi_get_name(sound, name));
+ ut_asserteq_str("HDAS", name);
+
+ ut_assertok(uclass_first_device(UCLASS_PCI, &pci));
+ ut_assertok(acpi_get_name(pci, name));
+ ut_asserteq_str("PCI0", name);
+
+ ut_assertok(uclass_first_device(UCLASS_ROOT, &root));
+ ut_assertok(acpi_get_name(root, name));
+ ut_asserteq_str("\\_SB", name);
+
+ /* Note that we don't have tests for acpi_name_from_id() */
+
return 0;
}
DM_TEST(dm_test_acpi_get_name, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
@@ -303,7 +303,7 @@ static int dm_test_acpi_i2c(struct unit_test_state *uts)
ut_asserteq(6, get_unaligned((u16 *)(ptr + 10)));
ut_asserteq(100000, get_unaligned((u32 *)(ptr + 12)));
ut_asserteq(0x43, get_unaligned((u16 *)(ptr + 16)));
- ut_asserteq_str("\\_SB.SI2C", (char *)ptr + 18);
+ ut_asserteq_str("\\_SB.I2C0", (char *)ptr + 18);
free_context(&ctx);
@@ -339,7 +339,7 @@ static int dm_test_acpi_spi(struct unit_test_state *uts)
ut_asserteq(0, ptr[17]);
ut_asserteq(0, ptr[18]);
ut_asserteq(0, get_unaligned((u16 *)(ptr + 19)));
- ut_asserteq_str("\\_SB.SSPI", (char *)ptr + 21);
+ ut_asserteq_str("\\_SB.SPI0", (char *)ptr + 21);
free_context(&ctx);
For many device types it is possible to figure out the name just by looking at its uclass or parent. Add a function to handle this, since it allows us to cover the vast majority of cases automatically. However it is sometimes impossible to figure out an ACPI name for a device just by looking at its uclass. For example a touch device may have a vendor-specific name. Add a new "acpi,name" property to allow a custom name to be created. With this new feature we can drop the get_name() methods in the sandbox I2C and SPI drivers. They were only added for testing purposes. Update the tests to use the new values. Signed-off-by: Simon Glass <sjg at chromium.org> --- Changes in v2: None Changes in v1: - Use acpi,ddn instead of acpi,desc - Rename to acpi_device_infer_name() - Update newly created sandbox tests arch/sandbox/dts/test.dts | 1 + doc/device-tree-bindings/device.txt | 13 ++++ drivers/core/acpi.c | 13 +++- drivers/i2c/sandbox_i2c.c | 10 --- drivers/spi/sandbox_spi.c | 10 --- include/acpi/acpi_device.h | 15 ++++ lib/acpi/acpi_device.c | 106 ++++++++++++++++++++++++++++ test/dm/acpi.c | 42 ++++++++++- test/dm/acpigen.c | 4 +- 9 files changed, 189 insertions(+), 25 deletions(-)