diff mbox series

[2/2] imx8mp_evk: simplify board spl code

Message ID 20200511061830.20580-2-peng.fan@nxp.com
State Superseded
Headers show
Series [1/2] imx: imx8mp_evk: fix boot issue | expand

Commit Message

Peng Fan May 11, 2020, 6:18 a.m. UTC
Simplify board SPL code
 - BSS area will be cleared by crt0_64.S
 - No need to get ccm device in spl_board_init
 - Use spl_early_init, not spl_init
 - timer_init has been invoked in arch_cpu_init

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/imx8mp_evk/spl.c | 28 ++--------------------------
 1 file changed, 2 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index c5f640dc7b..5f3ea0b6a1 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -25,11 +25,6 @@ 
 #include <mmc.h>
 #include <asm/arch/ddr.h>
 
-#include <dm/uclass.h>
-#include <dm/device.h>
-#include <dm/uclass-internal.h>
-#include <dm/device-internal.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
 int spl_board_boot_device(enum boot_device boot_dev_spl)
@@ -44,16 +39,7 @@  void spl_dram_init(void)
 
 void spl_board_init(void)
 {
-	struct udevice *dev;
-	int ret;
-
 	puts("Normal Boot\n");
-
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller at 30380000",
-					&dev);
-	if (ret < 0)
-		printf("Failed to find clock node. Check device tree\n");
 }
 
 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE)
@@ -114,6 +100,7 @@  int board_fit_config_name_match(const char *name)
 }
 #endif
 
+/* Do not use BSS area in this phase */
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -124,19 +111,10 @@  void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	timer_init();
+	spl_early_init();
 
 	preloader_console_init();
 
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	ret = spl_init();
-	if (ret) {
-		debug("spl_init() failed: %d\n", ret);
-		hang();
-	}
-
 	enable_tzc380();
 
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
@@ -145,6 +123,4 @@  void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	board_init_r(NULL, 0);
 }