[2/2] spl: add fixed memory node in target fdt also when loading ATF

From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

In a loading chain SPL -> ATF (->OP-TEE) -> U-Boot, ATF and a subsequent
OP-TEE will re-use the same fdt as the U-Boot target and may need the
information about usable memory ranges.

Especially OP-TEE needs this to initialize dynamic shared memory
(the only type U-Boot implements when talking to OP-TEE).

So allow spl_fixup_fdt() to take a fdt_blob argument, falling back to
the existing CONFIG_SYS_SPL_ARGS_ADDR if needed and call it from the
ATF path as well.

Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
Change-Id: I95d555e170534ad7fd03b183773e0b1f2d90d486
---
 common/spl/spl.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

On 2020/5/12 ??6:34, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> In a loading chain SPL -> ATF (->OP-TEE) -> U-Boot, ATF and a subsequent
> OP-TEE will re-use the same fdt as the U-Boot target and may need the
> information about usable memory ranges.
>
> Especially OP-TEE needs this to initialize dynamic shared memory
> (the only type U-Boot implements when talking to OP-TEE).
>
> So allow spl_fixup_fdt() to take a fdt_blob argument, falling back to
> the existing CONFIG_SYS_SPL_ARGS_ADDR if needed and call it from the
> ATF path as well.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

> Change-Id: I95d555e170534ad7fd03b183773e0b1f2d90d486

Remove this Change-Id.

For other parts:

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever

> ---
>   common/spl/spl.c | 19 +++++++++++++------
>   1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index b0f0e1557b..90d8bfd058 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -58,7 +58,8 @@ static bd_t bdata __attribute__ ((section(".data")));
>    */
>   __weak void show_boot_progress(int val) {}
>   
> -#if defined(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF)
> +#if defined(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF) || \
> +    defined(CONFIG_SPL_ATF)
>   /* weak, default platform-specific function to initialize dram banks */
>   __weak int dram_init_banksize(void)
>   {
> @@ -100,12 +101,14 @@ void __weak spl_perform_fixups(struct spl_image_info *spl_image)
>   {
>   }
>   
> -void spl_fixup_fdt(void)
> +void spl_fixup_fdt(void *fdt_blob)
>   {
> -#if defined(CONFIG_SPL_OF_LIBFDT) && defined(CONFIG_SYS_SPL_ARGS_ADDR)
> -	void *fdt_blob = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
> +#if defined(CONFIG_SPL_OF_LIBFDT)
>   	int err;
>   
> +	if (!fdt_blob)
> +		return;
> +
>   	err = fdt_check_header(fdt_blob);
>   	if (err < 0) {
>   		printf("fdt_root: %s\n", fdt_strerror(err));
> @@ -638,7 +641,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>   	initr_watchdog();
>   #endif
>   
> -	if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF))
> +	if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF) ||
> +	    IS_ENABLED(CONFIG_SPL_ATF))
>   		dram_init_banksize();
>   
>   	bootcount_inc();
> @@ -680,6 +684,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>   #if CONFIG_IS_ENABLED(ATF)
>   	case IH_OS_ARM_TRUSTED_FIRMWARE:
>   		debug("Jumping to U-Boot via ARM Trusted Firmware\n");
> +		spl_fixup_fdt(spl_image.fdt_addr);
>   		spl_invoke_atf(&spl_image);
>   		break;
>   #endif
> @@ -699,7 +704,9 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>   #ifdef CONFIG_SPL_OS_BOOT
>   	case IH_OS_LINUX:
>   		debug("Jumping to Linux\n");
> -		spl_fixup_fdt();
> +#if defined(CONFIG_SYS_SPL_ARGS_ADDR)
> +		spl_fixup_fdt((void *)CONFIG_SYS_SPL_ARGS_ADDR);
> +#endif
>   		spl_board_prepare_for_linux();
>   		jump_to_image_linux(&spl_image);
>   #endif