diff mbox series

[3/3] doc: rockchip: Document eMMC program steps

Message ID 20200524173213.201123-3-jagan@amarulasolutions.com
State Accepted
Commit 7e01363df32c7fafde97670fff41be9e615bb3be
Headers show
Series [1/3] arm64: dts: rk3399-nanopi4: Add u-boot,spl-boot-order | expand

Commit Message

Jagan Teki May 24, 2020, 5:32 p.m. UTC
Document eMMC partition creation and program steps for
rockchip platforms.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 doc/board/rockchip/rockchip.rst | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

Comments

Kever Yang May 25, 2020, 2:53 a.m. UTC | #1
On 2020/5/25 ??1:32, Jagan Teki wrote:
> Document eMMC partition creation and program steps for
> rockchip platforms.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   doc/board/rockchip/rockchip.rst | 32 ++++++++++++++++++++++++++++++--
>   1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index cd9c8d6dc4..1faa675aa8 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -117,14 +117,42 @@ To write an image that boots from an SD card (assumed to be /dev/sda)::
>           sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
>           sync
>   
> +eMMC
> +^^^^
> +
> +eMMC flash would probe on mmc0 in most of the rockchip platforms.
> +
> +Create GPT partition layout as defined in configurations::
> +
> +        mmc dev 0
> +        gpt write mmc 0 $partitions
> +
> +Connect the USB-OTG cable between host and target device.
> +
> +Launch fastboot at target::
> +
> +        fastboot 0
> +
> +Upon successful gadget connection,host show the USB device like::
> +
> +        lsusb
> +        Bus 001 Device 020: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
> +
> +Program the flash::
> +
> +        sudo fastboot -i 0x2207 flash loader1 idbloader.img
> +        sudo fastboot -i 0x2207 flash loader2 u-boot.itb
> +
> +Note: for rockchip 32-bit platforms the U-Boot proper image
> +is u-boot-dtb.img
> +
>   TODO
>   ----
>   
>   - Add rockchip idbloader image building
>   - Add rockchip TPL image building
>   - Document SPI flash boot
> -- Describe steps for eMMC flashing
>   - Add missing SoC's with it boards list
>   
>   .. Jagan Teki <jagan at amarulasolutions.com>
> -.. Fri Jan 10 00:08:40 IST 2020
> +.. Sunday 24 May 2020 10:08:41 PM IST
diff mbox series

Patch

diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index cd9c8d6dc4..1faa675aa8 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -117,14 +117,42 @@  To write an image that boots from an SD card (assumed to be /dev/sda)::
         sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
         sync
 
+eMMC
+^^^^
+
+eMMC flash would probe on mmc0 in most of the rockchip platforms.
+
+Create GPT partition layout as defined in configurations::
+
+        mmc dev 0
+        gpt write mmc 0 $partitions
+
+Connect the USB-OTG cable between host and target device.
+
+Launch fastboot at target::
+
+        fastboot 0
+
+Upon successful gadget connection,host show the USB device like::
+
+        lsusb
+        Bus 001 Device 020: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
+
+Program the flash::
+
+        sudo fastboot -i 0x2207 flash loader1 idbloader.img
+        sudo fastboot -i 0x2207 flash loader2 u-boot.itb
+
+Note: for rockchip 32-bit platforms the U-Boot proper image
+is u-boot-dtb.img
+
 TODO
 ----
 
 - Add rockchip idbloader image building
 - Add rockchip TPL image building
 - Document SPI flash boot
-- Describe steps for eMMC flashing
 - Add missing SoC's with it boards list
 
 .. Jagan Teki <jagan at amarulasolutions.com>
-.. Fri Jan 10 00:08:40 IST 2020
+.. Sunday 24 May 2020 10:08:41 PM IST