From patchwork Tue May 26 02:30:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 246537 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Tue, 26 May 2020 04:30:22 +0200 Subject: [PATCH 4/5] ARM: dts: stm32: Repair I2C2 operation on AV96 In-Reply-To: <20200526023023.293909-1-marex@denx.de> References: <20200526023023.293909-1-marex@denx.de> Message-ID: <20200526023023.293909-4-marex@denx.de> The I2C2 uses different pinmux on AV96, use correct pinmux and also add comments about the I2C being present on the "low-speed" expansion connector X6. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard Reviewed-by: Patrick Delaunay --- arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts index 1b0579c8ab..7f2e4b98a7 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts @@ -107,7 +107,7 @@ }; }; -&i2c1 { +&i2c1 { /* X6 I2C1 */ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_b>; i2c-scl-rising-time-ns = <185>; @@ -117,9 +117,9 @@ /delete-property/dma-names; }; -&i2c2 { +&i2c2 { /* X6 I2C2 */ pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; + pinctrl-0 = <&i2c2_pins_c>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay";