From patchwork Wed May 27 12:52:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 246687 List-Id: U-Boot discussion From: p.yadav at ti.com (Pratyush Yadav) Date: Wed, 27 May 2020 18:22:03 +0530 Subject: [PATCH 3/8] regmap: Allow specifying read/write width In-Reply-To: <20200527125208.24881-1-p.yadav@ti.com> References: <20200527125208.24881-1-p.yadav@ti.com> Message-ID: <20200527125208.24881-4-p.yadav@ti.com> Right now, regmap_read() and regmap_write() read/write a 32-bit value only. To write other lengths, regmap_raw_read() and regmap_raw_write() need to be used. This means that any driver ported from Linux that relies on regmap_{read,write}() to know the size already has to be updated at each callsite. This makes the port harder to maintain. So, allow specifying the read/write width to make it easier to port the drivers, since now the only change needed is when initializing the regmap. Signed-off-by: Pratyush Yadav Reviewed-by: Simon Glass --- drivers/core/regmap.c | 12 +++++++++--- include/regmap.h | 28 ++++++++++++++++++---------- 2 files changed, 27 insertions(+), 13 deletions(-) diff --git a/drivers/core/regmap.c b/drivers/core/regmap.c index 24651fb3ec..0180246095 100644 --- a/drivers/core/regmap.c +++ b/drivers/core/regmap.c @@ -245,7 +245,7 @@ struct regmap *devm_regmap_init(struct udevice *dev, const struct regmap_config *config) { int rc; - struct regmap **mapp; + struct regmap **mapp, *map; mapp = devres_alloc(devm_regmap_release, sizeof(struct regmap *), __GFP_ZERO); @@ -256,6 +256,10 @@ struct regmap *devm_regmap_init(struct udevice *dev, if (rc) return ERR_PTR(rc); + map = *mapp; + if (config) + map->width = config->width; + devres_add(dev, mapp); return *mapp; } @@ -378,7 +382,8 @@ int regmap_raw_read(struct regmap *map, uint offset, void *valp, size_t val_len) int regmap_read(struct regmap *map, uint offset, uint *valp) { - return regmap_raw_read(map, offset, valp, REGMAP_SIZE_32); + return regmap_raw_read(map, offset, valp, + map->width ? map->width : REGMAP_SIZE_32); } static inline void __write_8(u8 *addr, const u8 *val, @@ -488,7 +493,8 @@ int regmap_raw_write(struct regmap *map, uint offset, const void *val, int regmap_write(struct regmap *map, uint offset, uint val) { - return regmap_raw_write(map, offset, &val, REGMAP_SIZE_32); + return regmap_raw_write(map, offset, &val, + map->width ? map->width : REGMAP_SIZE_32); } int regmap_update_bits(struct regmap *map, uint offset, uint mask, uint val) diff --git a/include/regmap.h b/include/regmap.h index c7dd240a74..9362d864c0 100644 --- a/include/regmap.h +++ b/include/regmap.h @@ -76,16 +76,28 @@ struct regmap_range { }; struct regmap_bus; -struct regmap_config; + +/** + * struct regmap_config - Configure the behaviour of a regmap + * + * @width: Width of the read/write operations. Defaults to + * REGMAP_SIZE_32 if set to 0. + */ +struct regmap_config { + enum regmap_size_t width; +}; /** * struct regmap - a way of accessing hardware/bus registers * + * @width: Width of the read/write operations. Defaults to + * REGMAP_SIZE_32 if set to 0. * @range_count: Number of ranges available within the map * @ranges: Array of ranges */ struct regmap { enum regmap_endianness_t endianness; + enum regmap_size_t width; int range_count; struct regmap_range ranges[0]; }; @@ -96,31 +108,27 @@ struct regmap { */ /** - * regmap_write() - Write a 32-bit value to a regmap + * regmap_write() - Write a value to a regmap * * @map: Regmap to write to * @offset: Offset in the regmap to write to * @val: Data to write to the regmap at the specified offset * - * Note that this function will only write values of 32 bit width to the - * regmap; if the size of data to be read is different, the regmap_raw_write - * function can be used. + * If the map's width is not set, this function will write a 32-bit value. * * Return: 0 if OK, -ve on error */ int regmap_write(struct regmap *map, uint offset, uint val); /** - * regmap_read() - Read a 32-bit value from a regmap + * regmap_read() - Read a value from a regmap * * @map: Regmap to read from * @offset: Offset in the regmap to read from * @valp: Pointer to the buffer to receive the data read from the regmap * at the specified offset * - * Note that this function will only read values of 32 bit width from the - * regmap; if the size of data to be read is different, the regmap_raw_read - * function can be used. + * If the map's width is not set, this function will read a 32-bit value. * * Return: 0 if OK, -ve on error */ @@ -344,7 +352,7 @@ int regmap_init_mem_index(ofnode node, struct regmap **mapp, int index); * @dev: Device that will be interacted with * @bus: Bus-specific callbacks to use with device (IGNORED) * @bus_context: Data passed to bus-specific callbacks (IGNORED) - * @config: Configuration for register map (IGNORED) + * @config: Configuration for register map * * @Return a valid pointer to a struct regmap or a ERR_PTR() on error. * The structure is automatically freed when the device is unbound