From patchwork Wed May 27 12:56:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246707 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 18:26:29 +0530 Subject: [PATCH v2 15/23] ti: Drop panda board In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com> References: <20200527125637.149189-1-jagan@amarulasolutions.com> Message-ID: <20200527125637.149189-16-jagan@amarulasolutions.com> DM, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Lokesh Vutla Signed-off-by: Jagan Teki --- Changes for v2: - none arch/arm/mach-omap2/omap4/Kconfig | 4 - board/ti/panda/Kconfig | 12 -- board/ti/panda/MAINTAINERS | 6 - board/ti/panda/Makefile | 6 - board/ti/panda/panda.c | 346 ------------------------------ board/ti/panda/panda_mux_data.h | 86 -------- configs/omap4_panda_defconfig | 42 ---- include/configs/omap4_panda.h | 34 --- 8 files changed, 536 deletions(-) delete mode 100644 board/ti/panda/Kconfig delete mode 100644 board/ti/panda/MAINTAINERS delete mode 100644 board/ti/panda/Makefile delete mode 100644 board/ti/panda/panda.c delete mode 100644 board/ti/panda/panda_mux_data.h delete mode 100644 configs/omap4_panda_defconfig delete mode 100644 include/configs/omap4_panda.h diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index 899289b645..4cc360f38a 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional -config TARGET_OMAP4_PANDA - bool "TI OMAP4 PandaBoard" - config TARGET_OMAP4_SDP4430 bool "TI OMAP4 SDP4430" @@ -18,7 +15,6 @@ endchoice config SYS_SOC default "omap4" -source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" source "board/amazon/kc1/Kconfig" diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig deleted file mode 100644 index 8f277b612a..0000000000 --- a/board/ti/panda/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP4_PANDA - -config SYS_BOARD - default "panda" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap4_panda" - -endif diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS deleted file mode 100644 index 2142368271..0000000000 --- a/board/ti/panda/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PANDA BOARD -M: Lokesh Vutla -S: Maintained -F: board/ti/panda/ -F: include/configs/omap4_panda.h -F: configs/omap4_panda_defconfig diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile deleted file mode 100644 index dd2ff33afa..0000000000 --- a/board/ti/panda/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. - -obj-y := panda.o diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c deleted file mode 100644 index 9ebecfdbf5..0000000000 --- a/board/ti/panda/panda.c +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * Steve Sakoman - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "panda_mux_data.h" - -#ifdef CONFIG_USB_EHCI_HCD -#include -#include -#include -#endif - -#define PANDA_ULPI_PHY_TYPE_GPIO 182 -#define PANDA_BOARD_ID_1_GPIO 101 -#define PANDA_ES_BOARD_ID_1_GPIO 48 -#define PANDA_BOARD_ID_2_GPIO 171 -#define PANDA_ES_BOARD_ID_3_GPIO 3 -#define PANDA_ES_BOARD_ID_4_GPIO 2 - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP4 Panda\n" -}; - -struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; - -/** - * @brief board_init - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); - - gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA; - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return 0; -} - -/* -* Routine: get_board_revision -* Description: Detect if we are running on a panda revision A1-A6, -* or an ES panda board. This can be done by reading -* the level of GPIOs and checking the processor revisions. -* This should result in: -* Panda 4430: -* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 -* GPIO171, GPIO101, GPIO182: 1 0 1 => A6 -* Panda ES: -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3 -*/ -int get_board_revision(void) -{ - int board_id0, board_id1, board_id2; - int board_id3, board_id4; - int board_id; - - int processor_rev = omap_revision(); - - /* Setup the mux for the common board ID pins (gpio 171 and 182) */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT); - - board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); - board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO); - - if ((processor_rev >= OMAP4460_ES1_0 && - processor_rev <= OMAP4460_ES1_1)) { - /* - * Setup the mux for the ES specific board ID pins (gpio 101, - * 2 and 3. - */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - GPMC_A24); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - UNIPRO_RY0); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - UNIPRO_RX1); - - board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO); - board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO); - board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO); - -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - env_set("board_name", "panda-es"); -#endif - board_id = ((board_id4 << 4) | (board_id3 << 3) | - (board_id2 << 2) | (board_id1 << 1) | (board_id0)); - } else { - /* Setup the mux for the Ax specific board ID pins (gpio 101) */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - FREF_CLK2_OUT); - - board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO); - board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0)); - -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3)) - env_set("board_name", "panda-a4"); -#endif - } - - return board_id; -} - -/** - * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES - * - * - * Detect if we are running on B3 version of ES panda board, - * This can be done by reading the level of GPIO 171 and checking the - * processor revisions. - * GPIO171: 1 => Panda ES Rev B3 - * - * Return : return 1 if Panda ES Rev B3 , else return 0 - */ -u8 is_panda_es_rev_b3(void) -{ - int processor_rev = omap_revision(); - int ret = 0; - - if ((processor_rev >= OMAP4460_ES1_0 && - processor_rev <= OMAP4460_ES1_1)) { - - /* Setup the mux for the common board ID pins (gpio 171) */ - writew((IEN | M3), - (*ctrl)->control_padconf_core_base + UNIPRO_TX0); - - /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */ - ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO); - } - return ret; -} - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -/* - * emif_get_reg_dump() - emif_get_reg_dump strong function - * - * @emif_nr - emif base - * @regs - reg dump of timing values - * - * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c - */ -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -{ - u32 omap4_rev = omap_revision(); - - /* Same devices and geometry on both EMIFs */ - if (omap4_rev == OMAP4430_ES1_0) - *regs = &emif_regs_elpida_380_mhz_1cs; - else if (omap4_rev == OMAP4430_ES2_0) - *regs = &emif_regs_elpida_200_mhz_2cs; - else if (omap4_rev == OMAP4430_ES2_3) - *regs = &emif_regs_elpida_400_mhz_1cs; - else if (omap4_rev < OMAP4470_ES1_0) { - if(is_panda_es_rev_b3()) - *regs = &emif_regs_elpida_400_mhz_1cs; - else - *regs = &emif_regs_elpida_400_mhz_2cs; - } - else - *regs = &emif_regs_elpida_400_mhz_1cs; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - u32 omap_rev = omap_revision(); - - if (omap_rev == OMAP4430_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else if (omap_rev == OMAP4430_ES2_3) - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; - else if (omap_rev < OMAP4460_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; - else - *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; -} - -#endif - -/** - * @brief misc_init_r - Configure Panda board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ - int phy_type; - u32 auxclk, altclksrc; - - /* EHCI is not supported on ES1.0 */ - if (omap_revision() == OMAP4430_ES1_0) - return 0; - - get_board_revision(); - - gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO); - phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); - - if (phy_type == 1) { - /* ULPI PHY supplied by auxclk3 derived from sys_clk */ - debug("ULPI PHY supplied by auxclk3\n"); - - auxclk = readl(&scrm->auxclk3); - /* Select sys_clk */ - auxclk &= ~AUXCLK_SRCSELECT_MASK; - auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; - /* Set the divisor to 2 */ - auxclk &= ~AUXCLK_CLKDIV_MASK; - auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; - /* Request auxilary clock #3 */ - auxclk |= AUXCLK_ENABLE_MASK; - - writel(auxclk, &scrm->auxclk3); - } else { - /* ULPI PHY supplied by auxclk1 derived from PER dpll */ - debug("ULPI PHY supplied by auxclk1\n"); - - auxclk = readl(&scrm->auxclk1); - /* Select per DPLL */ - auxclk &= ~AUXCLK_SRCSELECT_MASK; - auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT; - /* Set the divisor to 16 */ - auxclk &= ~AUXCLK_CLKDIV_MASK; - auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT; - /* Request auxilary clock #3 */ - auxclk |= AUXCLK_ENABLE_MASK; - - writel(auxclk, &scrm->auxclk1); - } - - altclksrc = readl(&scrm->altclksrc); - - /* Activate alternate system clock supplier */ - altclksrc &= ~ALTCLKSRC_MODE_MASK; - altclksrc |= ALTCLKSRC_MODE_ACTIVE; - - /* enable clocks */ - altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; - - writel(altclksrc, &scrm->altclksrc); - - omap_die_id_usbethaddr(); - - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() >= OMAP4460_ES1_0) - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential_4460, - sizeof(wkup_padconf_array_essential_4460) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -#if !defined(CONFIG_SPL_BUILD) -void board_mmc_power_init(void) -{ - twl6030_power_mmc_init(0); -} -#endif -#endif - -#ifdef CONFIG_USB_EHCI_HCD - -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - unsigned int utmi_clk; - - /* Now we can enable our port clocks */ - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) - return ret; - - return 0; -} - -int ehci_hcd_stop(int index) -{ - return omap_ehci_hcd_stop(); -} -#endif - -/* - * get_board_rev() - get board revision - */ -u32 get_board_rev(void) -{ - return 0x20; -} diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h deleted file mode 100644 index ad9e36525b..0000000000 --- a/board/ti/panda/panda_mux_data.h +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * - * Balaji Krishnamoorthy - * Aneesh V - */ -#ifndef _PANDA_MUX_DATA_H_ -#define _PANDA_MUX_DATA_H_ - -#include - - -const struct pad_conf_entry core_padconf_array_essential[] = { - -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)}, /* uart3_tx */ -{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ -{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ -{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ -{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ -{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ -{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ -{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ -{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ -{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ -{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ -{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */ -{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ -{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ -{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { - -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ - -}; - -#endif /* _PANDA_MUX_DATA_H_ */ diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig deleted file mode 100644 index 3ac6319d2d..0000000000 --- a/configs/omap4_panda_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP44XX=y -CONFIG_TARGET_OMAP4_PANDA=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_FS_EXT4 is not set -# CONFIG_SPL_I2C_SUPPORT is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_UDC=y -CONFIG_USB_OMAP3=y -CONFIG_USB_GADGET=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h deleted file mode 100644 index 835b7c299e..0000000000 --- a/include/configs/omap4_panda.h +++ /dev/null @@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated. - * Steve Sakoman - * - * Configuration settings for the TI OMAP4 Panda board. - * See ti_omap4_common.h for OMAP4 common part - */ - -#ifndef __CONFIG_PANDA_H -#define __CONFIG_PANDA_H - -/* - * High Level Configuration Options - */ - -/* USB UHH support options */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 - -/* USB Networking options */ - -#define CONFIG_UBOOT_ENABLE_PADS_ALL - -#include - -/* GPIO */ - -/* ENV related config options */ - -#define CONFIG_ENV_OVERWRITE - -#endif /* __CONFIG_PANDA_H */