diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 96ec6360c4..657bd929b3 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1600,7 +1600,6 @@ source "board/freescale/p1023rdb/Kconfig"
 source "board/freescale/p1_twr/Kconfig"
 source "board/freescale/qemu-ppce500/Kconfig"
 source "board/freescale/t1040qds/Kconfig"
-source "board/freescale/t104xrdb/Kconfig"
 source "board/freescale/t208xqds/Kconfig"
 source "board/freescale/t208xrdb/Kconfig"
 source "board/freescale/t4qds/Kconfig"
diff --git a/board/freescale/t104xrdb/Kconfig b/board/freescale/t104xrdb/Kconfig
deleted file mode 100644
index e6e46fa126..0000000000
--- a/board/freescale/t104xrdb/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if TARGET_T1040RDB || TARGET_T1040D4RDB || \
-	TARGET_T1042RDB || TARGET_T1042D4RDB || \
-	TARGET_T1042RDB_PI
-
-config SYS_BOARD
-	default "t104xrdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "T104xRDB"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
deleted file mode 100644
index 8e3267917f..0000000000
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ /dev/null
@@ -1,38 +0,0 @@
-T104XRDB BOARD
-M:	Priyanka Jain <priyanka.jain at nxp.com>
-S:	Maintained
-F:	board/freescale/t104xrdb/
-F:	include/configs/T104xRDB.h
-F:	configs/T1040RDB_defconfig
-F:	configs/T1040RDB_NAND_defconfig
-F:	configs/T1040RDB_SPIFLASH_defconfig
-F:	configs/T1040D4RDB_defconfig
-F:	configs/T1040D4RDB_NAND_defconfig
-F:	configs/T1040D4RDB_SPIFLASH_defconfig
-F:	configs/T1042RDB_defconfig
-F:	configs/T1042D4RDB_defconfig
-F:	configs/T1042D4RDB_NAND_defconfig
-F:	configs/T1042D4RDB_SPIFLASH_defconfig
-F:	configs/T1042RDB_PI_defconfig
-F:	configs/T1042RDB_PI_NAND_defconfig
-F:	configs/T1042RDB_PI_SPIFLASH_defconfig
-
-T1040RDB_SDCARD BOARD
-M:	Priyanka Jain <priyanka.jain at nxp.com>
-S:	Maintained
-F:	configs/T1040RDB_SDCARD_defconfig
-F:	configs/T1040D4RDB_SDCARD_defconfig
-F:	configs/T1042D4RDB_SDCARD_defconfig
-F:	configs/T1042RDB_PI_SDCARD_defconfig
-
-T1040RDB_SECURE_BOOT BOARD
-M:	Ruchika Gupta <ruchika.gupta at nxp.com>
-S:	Maintained
-F:	configs/T1040RDB_SECURE_BOOT_defconfig
-F:	configs/T1040D4RDB_SECURE_BOOT_defconfig
-F:	configs/T1042RDB_SECURE_BOOT_defconfig
-F:	configs/T1042D4RDB_SECURE_BOOT_defconfig
-
-M:	Sumit Garg <sumit.garg at nxp.com>
-S:	Maintained
-F:	configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile
deleted file mode 100644
index 31abbd9aca..0000000000
--- a/board/freescale/t104xrdb/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Freescale Semiconductor, Inc.
-
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-y	+= t104xrdb.o
-obj-y	+= cpld.o
-obj-y	+= eth.o
-obj-$(CONFIG_PCI)	+= pci.o
-obj-$(CONFIG_FSL_DIU_FB)+= diu.o
-endif
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
deleted file mode 100644
index 09cb98e33d..0000000000
--- a/board/freescale/t104xrdb/README
+++ /dev/null
@@ -1,386 +0,0 @@
-Overview
---------
-The T1040RDB is a Freescale reference board that hosts the T1040 SoC
-(and variants). Variants inclued T1042 presonality of T1040, in which
-case T1040RDB can also be called T1042RDB.
-
-The T1042RDB is a Freescale reference board that hosts the T1042 SoC
-(and variants). The board is similar to T1040RDB, T1040 is a reduced
-personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
-
-The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
-(a personality of T1040 SoC). The board is similar to T1040RDB but is
-designed specially with low power features targeted for Printing Image Market.
-
-The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
-The board is re-designed T1040RDB board with following changes :
-    - Support of DDR4 memory and some enhancements
-
-The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
-The board is re-designed T1040RDB board with following changes :
-    - Support of DDR4 memory
-    - Support for 0x86 serdes protocol which can support following interfaces
-        - 2 RGMII's on DTSEC4, DTSEC5
-        - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
-
-Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
--------------------------------------------------------------------------
-Board		Si		Protocol		Targeted Market
--------------------------------------------------------------------------
-T1040RDB	T1040		0x66                    Networking
-T1040RDB	T1042		0x86                    Networking
-T1042RDB_PI	T1042		0x06                    Printing & Imaging
-T1040D4RDB	T1040		0x66                    Networking
-T1042D4RDB	T1042		0x86                    Networking
-
-
-T1040 SoC Overview
-------------------
-The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
-processor cores with high-performance data path acceleration architecture
-and network peripheral interfaces required for networking & telecommunications.
-
-The T1040/T1042 SoC includes the following function and features:
-
- - Four e5500 cores, each with a private 256 KB L2 cache
- - 256 KB shared L3 CoreNet platform cache (CPC)
- - Interconnect CoreNet platform
- - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
-   support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration
- for the following functions:
-    -  Packet parsing, classification, and distribution
-    -  Queue management for scheduling, packet sequencing, and congestion
-       management
-    -  Cryptography Acceleration (SEC 5.0)
-    - RegEx Pattern Matching Acceleration (PME 2.2)
-    - IEEE Std 1588 support
-    - Hardware buffer management for buffer allocation and deallocation
- - Ethernet interfaces
-    - Integrated 8-port Gigabit Ethernet switch (T1040 only)
-    - Four 1 Gbps Ethernet controllers
- - Two RGMII interfaces or one RGMII and one MII interfaces
- - High speed peripheral interfaces
-   - Four PCI Express 2.0 controllers running at up to 5 GHz
-   - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
-   - Upto two QSGMII interface
-   - Upto six SGMII interface supporting 1000 Mbps
-   - One SGMII interface supporting upto 2500 Mbps
- - Additional peripheral interfaces
-   - Two USB 2.0 controllers with integrated PHY
-   - SD/eSDHC/eMMC
-   - eSPI controller
-   - Four I2C controllers
-   - Four UARTs
-   - Four GPIO controllers
-   - Integrated flash controller (IFC)
-   - LCD and HDMI interface (DIU) with 12 bit dual data rate
-   - TDM interface
- - Multicore programmable interrupt controller (PIC)
- - Two 8-channel DMA engines
- - Single source clocking implementation
- - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
-
-T1040 SoC Personalities
--------------------------
-T1022 Personality:
-T1022 is a reduced personality of T1040 with less core/clusters.
-
-T1042 Personality:
-T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
-Ethernet switch. Rest of the blocks are same as T1040
-
-
-T1040RDB board Overview
--------------------------
- - SERDES Connections, 8 lanes information:
-	1: None
-	2: SGMII
-	3: QSGMII
-	4: QSGMII
-	5: PCIe1 x1 slot
-	6: mini PCIe connector
-	7: mini PCIe connector
-	8: SATA connector
- - DDR Controller
-     - Supports rates of up to 1600 MHz data-rate
-     - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- - IFC/Local Bus
-     - NAND flash: 1GB 8-bit NAND flash
-     - NOR: 128MB 16-bit NOR Flash
- - Ethernet
-     - Two on-board RGMII 10/100/1G ethernet ports.
- - CPLD
- - Clocks
-     - System and DDR clock (SYSCLK, ?DDRCLK?)
-     - SERDES clocks
- - Power Supplies
- - USB
-     - Supports two USB 2.0 ports with integrated PHYs
-     - Two type A ports with 5V at 1.5A per port.
- - SDHC
-     - SDHC/SDXC connector
- - SPI
-    -  On-board 64MB SPI flash
- - Other IO
-    - Two Serial ports
-    - Four I2C ports
-
-T1042RDB_PI board Overview
--------------------------
- - SERDES Connections, 8 lanes information:
-	1, 2, 3, 4 : PCIe x4 slot
-	5: mini PCIe connector
-	6: mini PCIe connector
-	7: NA
-	8: SATA connector
- - DDR Controller
-     - Supports rates of up to 1600 MHz data-rate
-     - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- - IFC/Local Bus
-     - NAND flash: 1GB 8-bit NAND flash
-     - NOR: 128MB 16-bit NOR Flash
- - Ethernet
-     - Two on-board RGMII 10/100/1G ethernet ports.
- - CPLD
- - Clocks
-     - System and DDR clock (SYSCLK, ?DDRCLK?)
-     - SERDES clocks
- - Video
-     - DIU supports video at up to 1280x1024x32bpp
- - Power Supplies
- - USB
-     - Supports two USB 2.0 ports with integrated PHYs
-     - Two type A ports with 5V at 1.5A per port.
- - SDHC
-     - SDHC/SDXC connector
- - SPI
-    -  On-board 64MB SPI flash
- - Other IO
-    - Two Serial ports
-    - Four I2C ports
-
-Memory map
------------
-The addresses in brackets are physical addresses.
-
-Start Address  End Address      Description                     Size
-0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD                      4KB
-0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash                64KB
-0xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR                         16MB
-0xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space         64KB
-0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space	        64KB
-0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space         64KB
-0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space	        64KB
-0xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal   32MB
-0xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal  32MB
-0xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash                 128MB
-0xF_0000_0000  0xF_003F_FFFF    DCSR                            4MB
-0xC_3000_0000  0xC_3FFF_FFFF    PCI Express 4 Mem Space         256MB
-0xC_2000_0000  0xC_2FFF_FFFF    PCI Express 3 Mem Space         256MB
-0xC_1000_0000  0xC_1FFF_FFFF    PCI Express 2 Mem Space         256MB
-0xC_0000_0000  0xC_0FFF_FFFF    PCI Express 1 Mem Space         256MB
-0x0_0000_0000  0x0_ffff_ffff    DDR                             2GB
-
-
-NOR Flash memory Map
----------------------
- Start          End             Definition                       Size
-0xEFF40000      0xEFFFFFFF      U-Boot (current bank)            768KB
-0xEFF20000      0xEFF3FFFF      U-Boot env (current bank)        128KB
-0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
-0xED300000      0xEFEFFFFF      rootfs (alt bank)                44MB
-0xEC800000      0xEC8FFFFF      Hardware device tree (alt bank)  1MB
-0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
-0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF40000      0xEBFFFFFF      U-Boot (alt bank)                768KB
-0xEBF20000      0xEBF3FFFF      U-Boot env (alt bank)            128KB
-0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
-0xE9300000      0xEBEFFFFF      rootfs (current bank)            44MB
-0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
-0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
-0xE8000000      0xE801FFFF      RCW (current bank)               128KB
-
-
-Various Software configurations/environment variables/commands
---------------------------------------------------------------
-The below commands apply to the board
-
-1. U-Boot environment variable hwconfig
-   The default hwconfig is:
-	hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
-					dr_mode=host,phy_type=utmi
-   Note: For USB gadget set "dr_mode=peripheral"
-
-2. FMAN Ucode versions
-   fsl_fman_ucode_t1040.bin
-
-3. Switching to alternate bank
-   Commands for switching to alternate bank.
-
-	1. To change from vbank0 to vbank4
-		=> cpld reset altbank (it will boot using vbank4)
-
-	2.To change from vbank4 to vbank0
-		=> cpld reset (it will boot using vbank0)
-
-NAND boot with 2 Stage boot loader
-----------------------------------
-PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
-SPL further initialise DDR using SPD and environment variables and copy
-U-Boot(768 KB) from flash to DDR.
-Finally SPL transer control to U-Boot for futher booting.
-
-SPL has following features:
- - Executes within 256K
- - No relocation required
-
- Run time view of SPL framework during  boot :-
- -----------------------------------------------
- Area        | Address                         |
------------------------------------------------
- Secure boot | 0xFFFC0000 (32KB)               |
- headers     |                                 |
- -----------------------------------------------
- GD, BD      | 0xFFFC8000 (4KB)                |
- -----------------------------------------------
- ENV         | 0xFFFC9000 (8KB)                |
- -----------------------------------------------
- HEAP        | 0xFFFCB000 (30KB)               |
- -----------------------------------------------
- STACK       | 0xFFFD8000 (22KB)               |
- -----------------------------------------------
- U-Boot SPL  | 0xFFFD8000 (160KB)              |
- -----------------------------------------------
-
-NAND Flash memory Map on T104xRDB
-------------------------------------------
- Start		 End		Definition			Size
-0x000000	0x0FFFFF	U-Boot                          1MB
-0x180000	0x19FFFF	U-Boot env                      128KB
-0x280000	0x29FFFF	FMAN Ucode                      128KB
-0x380000	0x39FFFF	QE Firmware                     128KB
-
-SD Card memory Map on T104xRDB
-------------------------------------------
- Block		#blocks		Definition			Size
-0x008		2048		U-Boot                          1MB
-0x800		0024		U-Boot env                      8KB
-0x820		0256		FMAN Ucode                      128KB
-0x920		0256		QE Firmware                     128KB
-
-SPI Flash memory Map on T104xRDB
-------------------------------------------
- Start		 End		Definition			Size
-0x000000	0x0FFFFF	U-Boot                          1MB
-0x100000	0x101FFF	U-Boot env                      8KB
-0x110000	0x12FFFF	FMAN Ucode                      128KB
-0x130000	0x14FFFF	QE Firmware                     128KB
-
-Please note QE Firmware is only valid for T1040RDB
-
-
-Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
-==========================================================
-NOR boot SW setting:
-SW1: 00010011
-SW2: 10111011
-SW3: 11100001
-
-NAND boot SW setting:
-SW1: 10001000
-SW2: 00111011
-SW3: 11110001
-
-SPI boot SW setting:
-SW1: 00100010
-SW2: 10111011
-SW3: 11100001
-
-SD boot SW setting:
-SW1: 00100000
-SW2: 00111011
-SW3: 11100001
-
-Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
-=============================================================
-NOR boot SW setting:
-SW1: 00010011
-SW2: 10111001
-SW3: 11100001
-
-NAND boot SW setting:
-SW1: 10001000
-SW2: 00111001
-SW3: 11110001
-
-SPI boot SW setting:
-SW1: 00100010
-SW2: 10111001
-SW3: 11100001
-
-SD boot SW setting:
-SW1: 00100000
-SW2: 00111001
-SW3: 11100001
-
-PBL-based image generation
-==========================
-Changes only the required register bit in in PBI commands.
-
-Provides reference code which might needs some
-modification as per requirement.
-example:
-By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
-which needs to be changed for SPI and SD.
-
-For SD-boot
-==============
-1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
-
-example:
- RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
-
-Change
-66000002 40000002 ec027000 01000000
-to
-66000002 40000002 6c027000 01000000
-
-2. SD does not support flush so remove flush from pbl, make changes in
-   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
-   with 0x091380c0
-
-For SPI-boot
-==============
-1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
-
-example:
- RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
-
-Change
-66000002 40000002 ec027000 01000000
-to
-66000002 40000002 5c027000 01000000
-
-2. SPI does not support flush so remove flush from pbl, make changes in
-   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
-   with 0x091380c0
-
-Device tree support and how to enable it for different configs
---------------------------------------------------------------
-Device tree support is available for t1042d4rdb for below mentioned boot,
-1. NOR Boot
-2. NAND Boot
-3. SD Boot
-4. SPIFLASH Boot
-
-To enable device tree support for other boot, below configs need to be
-enabled in relative defconfig file,
-1. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required)
-2. CONFIG_OF_CONTROL
-3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
-
-If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
-2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t104xrdb/cpld.c b/board/freescale/t104xrdb/cpld.c
deleted file mode 100644
index ac34095f3b..0000000000
--- a/board/freescale/t104xrdb/cpld.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/**
- * Copyright 2014 Freescale Semiconductor
- *
- * This file provides support for the board-specific CPLD used on some Freescale
- * reference boards.
- *
- * The following macros need to be defined:
- *
- * CONFIG_SYS_CPLD_BASE-The virtual address of the base of the CPLD register map
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#include "cpld.h"
-
-u8 cpld_read(unsigned int reg)
-{
-	void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
-	return in_8(p + reg);
-}
-
-void cpld_write(unsigned int reg, u8 value)
-{
-	void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
-	out_8(p + reg, value);
-}
-
-/**
- * Set the boot bank to the alternate bank
- */
-void cpld_set_altbank(void)
-{
-	u8 reg = CPLD_READ(flash_ctl_status);
-
-	reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
-
-	CPLD_WRITE(flash_ctl_status, reg);
-	CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
-}
-
-/**
- * Set the boot bank to the default bank
- */
-void cpld_set_defbank(void)
-{
-	u8 reg = CPLD_READ(flash_ctl_status);
-
-	reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
-
-	CPLD_WRITE(flash_ctl_status, reg);
-	CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
-}
-
-#ifdef DEBUG
-static void cpld_dump_regs(void)
-{
-	printf("cpld_ver	 = 0x%02x\n", CPLD_READ(cpld_ver));
-	printf("cpld_ver_sub	 = 0x%02x\n", CPLD_READ(cpld_ver_sub));
-	printf("hw_ver		 = 0x%02x\n", CPLD_READ(hw_ver));
-	printf("sw_ver		 = 0x%02x\n", CPLD_READ(sw_ver));
-	printf("reset_ctl1	 = 0x%02x\n", CPLD_READ(reset_ctl1));
-	printf("reset_ctl2	 = 0x%02x\n", CPLD_READ(reset_ctl2));
-	printf("int_status	 = 0x%02x\n", CPLD_READ(int_status));
-	printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status));
-	printf("fan_ctl_status	 = 0x%02x\n", CPLD_READ(fan_ctl_status));
-#if defined(CONFIG_TARGET_T1040D4D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
-	printf("int_mask	 = 0x%02x\n", CPLD_READ(int_mask));
-#else
-	printf("led_ctl_status	 = 0x%02x\n", CPLD_READ(led_ctl_status));
-#endif
-	printf("sfp_ctl_status	 = 0x%02x\n", CPLD_READ(sfp_ctl_status));
-	printf("misc_ctl_status	 = 0x%02x\n", CPLD_READ(misc_ctl_status));
-	printf("boot_override	 = 0x%02x\n", CPLD_READ(boot_override));
-	printf("boot_config1	 = 0x%02x\n", CPLD_READ(boot_config1));
-	printf("boot_config2	 = 0x%02x\n", CPLD_READ(boot_config2));
-	putc('\n');
-}
-#endif
-
-int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	int rc = 0;
-
-	if (argc <= 1)
-		return cmd_usage(cmdtp);
-
-	if (strcmp(argv[1], "reset") == 0) {
-		if (strcmp(argv[2], "altbank") == 0)
-			cpld_set_altbank();
-		else
-			cpld_set_defbank();
-#ifdef DEBUG
-	} else if (strcmp(argv[1], "dump") == 0) {
-		cpld_dump_regs();
-#endif
-	} else
-		rc = cmd_usage(cmdtp);
-
-	return rc;
-}
-
-U_BOOT_CMD(
-	cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
-	"Reset the board or alternate bank",
-	"reset - hard reset to default bank\n"
-	"cpld reset altbank - reset to alternate bank\n"
-#ifdef DEBUG
-	"cpld dump - display the CPLD registers\n"
-#endif
-	);
diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h
deleted file mode 100644
index a816aef10a..0000000000
--- a/board/freescale/t104xrdb/cpld.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/**
- * Copyright 2013 Freescale Semiconductor
- *
- * This file provides support for the ngPIXIS, a board-specific FPGA used on
- * some Freescale reference boards.
- */
-
-/*
- * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
- */
-struct cpld_data {
-	u8 cpld_ver;		/* 0x00 - CPLD Major Revision Register */
-	u8 cpld_ver_sub;	/* 0x01 - CPLD Minor Revision Register */
-	u8 hw_ver;		/* 0x02 - Hardware Revision Register */
-	u8 sw_ver;		/* 0x03 - Software Revision register */
-	u8 res0[12];		/* 0x04 - 0x0F - not used */
-	u8 reset_ctl1;		/* 0x10 - Reset control Register1 */
-	u8 reset_ctl2;		/* 0x11 - Reset control Register2 */
-	u8 int_status;		/* 0x12 - Interrupt status Register */
-	u8 flash_ctl_status;	/* 0x13 - Flash control and status register */
-	u8 fan_ctl_status;	/* 0x14 - Fan control and status register  */
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
-	u8 int_mask;		/* 0x15 - Interrupt mask Register */
-#else
-	u8 led_ctl_status;	/* 0x15 - LED control and status register */
-#endif
-	u8 sfp_ctl_status;	/* 0x16 - SFP control and status register  */
-	u8 misc_ctl_status;	/* 0x17 - Miscellanies ctrl & status register*/
-	u8 boot_override;	/* 0x18 - Boot override register */
-	u8 boot_config1;	/* 0x19 - Boot config override register*/
-	u8 boot_config2;	/* 0x1A - Boot config override register*/
-} cpld_data_t;
-
-
-/* Pointer to the CPLD register set */
-
-u8 cpld_read(unsigned int reg);
-void cpld_write(unsigned int reg, u8 value);
-
-#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
-#define CPLD_WRITE(reg, value)\
-		cpld_write(offsetof(struct cpld_data, reg), value)
-#define MISC_CTL_SG_SEL		0x80
-#define MISC_CTL_AURORA_SEL	0x02
-#define MISC_MUX_QE_TDM		0xc0
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
deleted file mode 100644
index e313bf99cf..0000000000
--- a/board/freescale/t104xrdb/ddr.c
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <init.h>
-#include <log.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-#include <asm/mpc85xx_gpio.h>
-#include <linux/delay.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num > 1) {
-		printf("Not supported controller number %d\n", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	pbsp = udimms[0];
-
-	/* Get clk_adjust according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks &&
-		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found\n");
-		printf("for data rate %lu MT/s\n", ddr_freq);
-		printf("Trying to use the highest speed (%u) parameters\n",
-		       pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-found:
-	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
-		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
-		"wrlvl_ctrl_3 0x%x\n",
-		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
-		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
-		pbsp->wrlvl_ctl_3);
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-#ifdef CONFIG_SYS_FSL_DDR4
-	popts->half_strength_driver_enable = 1;
-	/* optimize cpo for erratum A-009942 */
-	popts->cpo_sample = 0x59;
-#else
-	popts->half_strength_driver_enable = 0;
-#endif
-	/*
-	 * Write leveling override
-	 */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/*
-	 * rtt and rtt_wr override
-	 */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 75 Ohm */
-#ifdef CONFIG_SYS_FSL_DDR4
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) |
-		DDR_CDR2_VREF_OVRD(70);       /* Vref = 70% */
-#else
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-#endif
-}
-
-#if defined(CONFIG_DEEP_SLEEP)
-void board_mem_sleep_setup(void)
-{
-	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
-
-	/* does not provide HW signals for power management */
-	clrbits_8(cpld_base + 0x17, 0x40);
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
-
-int dram_init(void)
-{
-	phys_size_t dram_size;
-
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
-	puts("Initializing....using SPD\n");
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size =  fsl_ddr_sdram_size();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
-	fsl_dp_resume();
-#endif
-
-	gd->ram_size = dram_size;
-
-	return 0;
-}
diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h
deleted file mode 100644
index f9d667f617..0000000000
--- a/board/freescale/t104xrdb/ddr.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 rank_gb;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 wrlvl_ctl_2;
-	u32 wrlvl_ctl_3;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl
-	 * ranks| mhz| GB  |adjst| start |   ctl2
-	 */
-#ifdef CONFIG_SYS_FSL_DDR4
-	{2,  1600, 4, 8,     6, 0x07090A0c, 0x0e0f100a},
-	{1,  1600, 4, 8,     5, 0x0607080B, 0x0C0C0D09},
-#elif defined(CONFIG_SYS_FSL_DDR3)
-	{2,  833,  4, 8,     6, 0x06060607, 0x08080807},
-	{2,  833,  0, 8,     6, 0x06060607, 0x08080807},
-	{2,  1350, 4, 8,     7, 0x0708080A, 0x0A0B0C09},
-	{2,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09},
-	{2,  1666, 4, 8,     7, 0x0808090B, 0x0C0D0E0A},
-	{2,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A},
-	{1,  833,  4, 8,     6, 0x06060607, 0x08080807},
-	{1,  833,  0, 8,     6, 0x06060607, 0x08080807},
-	{1,  1350, 4, 8,     7, 0x0708080A, 0x0A0B0C09},
-	{1,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09},
-	{1,  1666, 4, 8,     7, 0x0808090B, 0x0C0D0E0A},
-	{1,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A},
-#else
-#error DDR type not defined
-#endif
-	{}
-};
-
-#endif
-
-static const struct board_specific_parameters *udimms[] = {
-	udimm0,
-};
diff --git a/board/freescale/t104xrdb/diu.c b/board/freescale/t104xrdb/diu.c
deleted file mode 100644
index 25c8597202..0000000000
--- a/board/freescale/t104xrdb/diu.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Author: Priyanka Jain <Priyanka.Jain at freescale.com>
- */
-
-#include <clock_legacy.h>
-#include <asm/io.h>
-#include <common.h>
-#include <command.h>
-#include <fsl_diu_fb.h>
-#include <linux/ctype.h>
-#include <video_fb.h>
-
-#include "../common/diu_ch7301.h"
-
-#include "cpld.h"
-#include "t104xrdb.h"
-
-/*
- * DIU Area Descriptor
- *
- * Note that we need to byte-swap the value before it's written to the AD
- * register. So even though the registers don't look like they're in the same
- * bit positions as they are on the MPC8610, the same value is written to the
- * AD register on the MPC8610 and on the P1022.
- */
-#define AD_BYTE_F		0x10000000
-#define AD_ALPHA_C_SHIFT	25
-#define AD_BLUE_C_SHIFT		23
-#define AD_GREEN_C_SHIFT	21
-#define AD_RED_C_SHIFT		19
-#define AD_PIXEL_S_SHIFT	16
-#define AD_COMP_3_SHIFT		12
-#define AD_COMP_2_SHIFT		8
-#define AD_COMP_1_SHIFT		4
-#define AD_COMP_0_SHIFT		0
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
-	unsigned long speed_ccb, temp;
-	u32 pixval;
-	int ret;
-
-	speed_ccb = get_bus_freq(0);
-	temp = 1000000000 / pixclock;
-	temp *= 1000;
-	pixval = speed_ccb / temp;
-
-	/* Program HDMI encoder */
-	ret = diu_set_dvi_encoder(temp);
-	if (ret) {
-		puts("Failed to set DVI encoder\n");
-		return;
-	}
-
-	/* Program pixel clock */
-	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
-		 ((pixval << PXCK_BITS_START) & PXCK_MASK));
-
-	/* enable clock*/
-	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
-		 ((pixval << PXCK_BITS_START) & PXCK_MASK));
-}
-
-int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
-{
-	u32 pixel_format;
-	u8 sw;
-
-	/*Configure Display ouput port as HDMI*/
-	sw = CPLD_READ(sfp_ctl_status);
-	CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP));
-
-	pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
-		(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
-		(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
-		(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
-		(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
-
-	printf("DIU: Switching to monitor DVI @ %ux%u\n",  xres, yres);
-
-	return fsl_diu_init(xres, yres, pixel_format, 0);
-}
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
deleted file mode 100644
index 9cbc8754dc..0000000000
--- a/board/freescale/t104xrdb/eth.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/fsl_serdes.h>
-#include <asm/immap_85xx.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <malloc.h>
-#include <fsl_dtsec.h>
-#include <vsc9953.h>
-
-#include "../common/fman.h"
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_FMAN_ENET
-	struct memac_mdio_info memac_mdio_info;
-	unsigned int i;
-	int phy_addr = 0;
-#ifdef CONFIG_VSC9953
-	phy_interface_t phy_int;
-	struct mii_dev *bus;
-#endif
-
-	printf("Initializing Fman\n");
-
-	memac_mdio_info.regs =
-		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
-	memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the real 1G MDIO bus */
-	fm_memac_mdio_init(bis, &memac_mdio_info);
-
-	/*
-	 * Program on board RGMII, SGMII PHY addresses.
-	 */
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		int idx = i - FM1_DTSEC1;
-
-		switch (fm_info_get_enet_if(i)) {
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
-		case PHY_INTERFACE_MODE_SGMII:
-			/* T1040RDB & T1040D4RDB only supports SGMII on
-			 * DTSEC3
-			 */
-			fm_info_set_phy_address(FM1_DTSEC3,
-						CONFIG_SYS_SGMII1_PHY_ADDR);
-			break;
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-		case PHY_INTERFACE_MODE_SGMII:
-			/* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */
-			if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i))
-				fm_info_set_phy_address(i, 0);
-			/* T1042RDB only supports SGMII on DTSEC3 */
-			fm_info_set_phy_address(FM1_DTSEC3,
-						CONFIG_SYS_SGMII1_PHY_ADDR);
-			break;
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-		case PHY_INTERFACE_MODE_SGMII:
-			/* T1042D4RDB supports SGMII on DTSEC1, DTSEC2
-			 *  & DTSEC3
-			 */
-			if (FM1_DTSEC1 == i)
-				phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR;
-			if (FM1_DTSEC2 == i)
-				phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR;
-			if (FM1_DTSEC3 == i)
-				phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR;
-			fm_info_set_phy_address(i, phy_addr);
-			break;
-#endif
-		case PHY_INTERFACE_MODE_RGMII:
-			if (FM1_DTSEC4 == i)
-				phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
-			if (FM1_DTSEC5 == i)
-				phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
-			fm_info_set_phy_address(i, phy_addr);
-			break;
-		case PHY_INTERFACE_MODE_QSGMII:
-			fm_info_set_phy_address(i, 0);
-			break;
-		case PHY_INTERFACE_MODE_NONE:
-			fm_info_set_phy_address(i, 0);
-			break;
-		default:
-			printf("Fman1: DTSEC%u set to unknown interface %i\n",
-			       idx + 1, fm_info_get_enet_if(i));
-			fm_info_set_phy_address(i, 0);
-			break;
-		}
-		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII ||
-		    fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE)
-			fm_info_set_mdio(i, NULL);
-		else
-			fm_info_set_mdio(i,
-					 miiphy_get_dev_by_name(
-							DEFAULT_FM_MDIO_NAME));
-	}
-
-#ifdef CONFIG_VSC9953
-	/* SerDes configured for QSGMII */
-	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
-		for (i = 0; i < 4; i++) {
-			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i;
-			phy_int = PHY_INTERFACE_MODE_QSGMII;
-
-			vsc9953_port_info_set_mdio(i, bus);
-			vsc9953_port_info_set_phy_address(i, phy_addr);
-			vsc9953_port_info_set_phy_int(i, phy_int);
-			vsc9953_port_enable(i);
-		}
-	}
-	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
-		for (i = 4; i < 8; i++) {
-			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
-			phy_int = PHY_INTERFACE_MODE_QSGMII;
-
-			vsc9953_port_info_set_mdio(i, bus);
-			vsc9953_port_info_set_phy_address(i, phy_addr);
-			vsc9953_port_info_set_phy_int(i, phy_int);
-			vsc9953_port_enable(i);
-		}
-	}
-
-	/* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
-	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
-		vsc9953_port_enable(8);
-
-	/* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
-	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
-		/* Enable L2 On MAC2 using SCFG */
-		struct ccsr_scfg *scfg = (struct ccsr_scfg *)
-				CONFIG_SYS_MPC85xx_SCFG;
-
-		out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
-			 (0x80000000));
-		vsc9953_port_enable(9);
-	}
-#endif
-
-	cpu_eth_init(bis);
-#endif
-
-	return pci_eth_init(bis);
-}
diff --git a/board/freescale/t104xrdb/law.c b/board/freescale/t104xrdb/law.c
deleted file mode 100644
index 0f6b71a8c2..0000000000
--- a/board/freescale/t104xrdb/law.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-#ifdef CONFIG_MTD_NOR_FLASH
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE_PHYS
-	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t104xrdb/pci.c b/board/freescale/t104xrdb/pci.c
deleted file mode 100644
index ff7cf36446..0000000000
--- a/board/freescale/t104xrdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, bd_t *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
deleted file mode 100644
index 2306d0391e..0000000000
--- a/board/freescale/t104xrdb/spl.c
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env_internal.h>
-#include <init.h>
-#include <malloc.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-#include "../common/sleep.h"
-#include "../common/spl.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L3_SIZE;
-}
-
-unsigned long get_board_sys_clk(void)
-{
-	return CONFIG_SYS_CLK_FREQ;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
-	return CONFIG_DDR_CLK_FREQ;
-}
-
-#define FSL_CORENET_CCSR_PORSR1_RCW_MASK	0xFF800000
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, sys_clk, uart_clk;
-#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
-	u32 porsr1, pinctl;
-	u32 svr = get_svr();
-#endif
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
-	if (IS_SVR_REV(svr, 1, 0)) {
-		/*
-		 * There is T1040 SoC issue where NOR, FPGA are inaccessible
-		 * during NAND boot because IFC signals > IFC_AD7 are not
-		 * enabled. This workaround changes RCW source to make all
-		 * signals enabled.
-		 */
-		porsr1 = in_be32(&gur->porsr1);
-		pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK))
-			  | 0x24800000);
-		out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000),
-			 pinctl);
-	}
-#endif
-
-	/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
-	memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
-
-	/* Update GD pointer */
-	gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
-
-#ifdef CONFIG_DEEP_SLEEP
-	/* disable the console if boot from deep sleep */
-	if (is_warm_boot())
-		fsl_dp_disable_console();
-#endif
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("" : : : "memory");
-
-	console_init_f();
-
-	/* initialize selected port with appropriate baud rate */
-	sys_clk = get_board_sys_clk();
-	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
-	uart_clk = sys_clk * plat_ratio / 2;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     uart_clk / 16 / CONFIG_BAUDRATE);
-
-	relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	bd_t *bd;
-
-	bd = (bd_t *)(gd + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L3_SIZE;
-
-	arch_cpu_init();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-
-	/* relocate environment function pointers etc. */
-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_MMC) || \
-	defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)SPL_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)SPL_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
-	fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			       (uchar *)SPL_ENV_ADDR);
-#endif
-	gd->env_addr  = (ulong)(SPL_ENV_ADDR);
-	gd->env_valid = ENV_VALID;
-#endif
-
-	i2c_init_all();
-
-	puts("\n\n");
-
-	dram_init();
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	fsl_spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}
diff --git a/board/freescale/t104xrdb/t1040_nand_rcw.cfg b/board/freescale/t104xrdb/t1040_nand_rcw.cfg
deleted file mode 100644
index 3300c184a1..0000000000
--- a/board/freescale/t104xrdb/t1040_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 e8106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040_sd_rcw.cfg b/board/freescale/t104xrdb/t1040_sd_rcw.cfg
deleted file mode 100644
index fd3e8c5bbf..0000000000
--- a/board/freescale/t104xrdb/t1040_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 68106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040_spi_rcw.cfg b/board/freescale/t104xrdb/t1040_spi_rcw.cfg
deleted file mode 100644
index fccde5e01f..0000000000
--- a/board/freescale/t104xrdb/t1040_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 58106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg b/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
deleted file mode 100644
index c1034b3dfa..0000000000
--- a/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 ec027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg b/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
deleted file mode 100644
index e6f7585bb0..0000000000
--- a/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 6c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg b/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
deleted file mode 100644
index cde862dff5..0000000000
--- a/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 5c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_nand_rcw.cfg b/board/freescale/t104xrdb/t1042_nand_rcw.cfg
deleted file mode 100644
index db4d52f397..0000000000
--- a/board/freescale/t104xrdb/t1042_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 ec027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
deleted file mode 100644
index 57de89ad0e..0000000000
--- a/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 e8106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
deleted file mode 100644
index bbce9a3693..0000000000
--- a/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 68106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
deleted file mode 100644
index b1d8b4c65a..0000000000
--- a/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 58106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_sd_rcw.cfg b/board/freescale/t104xrdb/t1042_sd_rcw.cfg
deleted file mode 100644
index d77bf189b2..0000000000
--- a/board/freescale/t104xrdb/t1042_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 6c027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_spi_rcw.cfg b/board/freescale/t104xrdb/t1042_spi_rcw.cfg
deleted file mode 100644
index e8a3ad1280..0000000000
--- a/board/freescale/t104xrdb/t1042_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 5c027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg b/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
deleted file mode 100644
index 9e0ee2795f..0000000000
--- a/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 ec027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg b/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
deleted file mode 100644
index 9d9046d654..0000000000
--- a/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 6c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg b/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
deleted file mode 100644
index f1ec98932f..0000000000
--- a/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 5c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t104x_pbi.cfg b/board/freescale/t104xrdb/t104x_pbi.cfg
deleted file mode 100644
index 51945b4748..0000000000
--- a/board/freescale/t104xrdb/t104x_pbi.cfg
+++ /dev/null
@@ -1,36 +0,0 @@
-#PBI commands
-#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed
-09250100 00000400
-09250108 00002000
-#Software Workaround for errata A-008007 to reset PVR register
-09000010 0000000b
-09000014 c0000000
-09000018 81d00017
-89020400 a1000000
-091380c0 000f0000
-89020400 00000000
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#Configure CPC1 as 256KB SRAM
-09010100 00000000
-09010104 fffc0007
-09010f00 081e000d
-09010000 80000000
-#Configure LAW for CPC1
-09000cd0 00000000
-09000cd4 fffc0000
-09000cd8 81000011
-#Configure alternate space
-09000010 00000000
-09000014 ff000000
-09000018 81000000
-#Configure SPI controller
-09110000 80000403
-09110020 2d170008
-09110024 00100008
-09110028 00100008
-0911002c 00100008
-#Flush PBL data
-091380c0 000FFFFF
diff --git a/board/freescale/t104xrdb/t104x_pbi_sb.cfg b/board/freescale/t104xrdb/t104x_pbi_sb.cfg
deleted file mode 100644
index 98dc8e4c24..0000000000
--- a/board/freescale/t104xrdb/t104x_pbi_sb.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-#PBI commands
-#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed
-09250100 00000400
-09250108 00002000
-#Software Workaround for errata A-008007 to reset PVR register
-09000010 0000000b
-09000014 c0000000
-09000018 81d00017
-89020400 a1000000
-091380c0 000f0000
-89020400 00000000
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#Configure CPC1 as 256KB SRAM
-09010100 00000000
-09010104 bffc0007
-09010f00 081e000d
-09010000 80000000
-#Configure LAW for CPC1
-09000cd0 00000000
-09000cd4 bffc0000
-09000cd8 81000011
-#Configure alternate space
-09000010 00000000
-09000014 bf000000
-09000018 81000000
-#Configure SPI controller
-09110000 80000403
-09110020 2d170008
-09110024 00100008
-09110028 00100008
-0911002c 00100008
-#Flush PBL data
-091380c0 000FFFFF
-090e0200 bffd0000
-091380c0 000FFFFF
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
deleted file mode 100644
index 6a4b351068..0000000000
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <hwconfig.h>
-#include <image.h>
-#include <init.h>
-#include <log.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_fdt.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include "../common/sleep.h"
-#include "t104xrdb.h"
-#include "cpld.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	struct cpu_type *cpu = gd->arch.cpu;
-	u8 sw;
-
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
-	printf("Board: %sD4RDB\n", cpu->name);
-#else
-	printf("Board: %sRDB\n", cpu->name);
-#endif
-	printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
-	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
-
-	sw = CPLD_READ(flash_ctl_status);
-	sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
-
-	printf("vBank: %d\n", sw);
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-#if defined(CONFIG_DEEP_SLEEP)
-	if (is_warm_boot())
-		fsl_dp_disable_console();
-#endif
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-#ifdef CONFIG_SYS_FLASH_BASE
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, flash_esel, BOOKE_PAGESZ_256M, 1);
-#endif
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 srds_s1;
-
-	srds_s1 = in_be32(&gur->rcwsr[4]) >> 24;
-
-	printf("SERDES Reference : 0x%X\n", srds_s1);
-
-	/* select SGMII*/
-	if (srds_s1 == 0x86)
-		CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
-					 MISC_CTL_SG_SEL);
-
-	/* select SGMII and Aurora*/
-	if (srds_s1 == 0x8E)
-		CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
-					 MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
-
-#if defined(CONFIG_TARGET_T1040D4RDB)
-	if (hwconfig("qe-tdm")) {
-		CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) |
-			   MISC_MUX_QE_TDM);
-		printf("QECSR : 0x%02x, mux to qe-tdm\n",
-		       CPLD_READ(sfp_ctl_status));
-	}
-	/* Mask all CPLD interrupt sources, except QSGMII interrupts */
-	if (CPLD_READ(sw_ver) < 0x03) {
-		debug("CPLD SW version 0x%02x doesn't support int_mask\n",
-		      CPLD_READ(sw_ver));
-	} else {
-		CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL &
-			   ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2));
-	}
-#endif
-
-	return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_PCI
-	pci_of_setup(blob, bd);
-#endif
-
-	fdt_fixup_liodn(blob);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-	fdt_fixup_fman_ethernet(blob);
-#endif
-
-	if (hwconfig("qe-tdm"))
-		fdt_del_diu(blob);
-	return 0;
-}
diff --git a/board/freescale/t104xrdb/t104xrdb.h b/board/freescale/t104xrdb/t104xrdb.h
deleted file mode 100644
index b6459cd629..0000000000
--- a/board/freescale/t104xrdb/t104xrdb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __T104x_RDB_H__
-#define __T104x_RDB_H__
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-
-#endif
diff --git a/board/freescale/t104xrdb/tlb.c b/board/freescale/t104xrdb/tlb.c
deleted file mode 100644
index 9dcba7933f..0000000000
--- a/board/freescale/t104xrdb/tlb.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) && \
-	!defined(CONFIG_NXP_ESBC)
-	/*
-	 * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the
-	 * SRAM is at 0xfffc0000, it covered the 0xfffff000.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_256K, 1),
-
-#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_SPL_BUILD)
-	/*
-	 * *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot
-	 * the physical address of the SRAM is at 0xbffc0000,
-	 * and virtual address is 0xfffc0000
-	 */
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_VADDR,
-		      CONFIG_SYS_INIT_L3_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_256K, 1),
-#else
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_16M, 1),
-
-	/* *I*G* - Flash, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256K, 1),
-
-	/* Bman/Qman */
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 5, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 7, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_16M, 1),
-#endif
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 9, BOOKE_PAGESZ_4M, 1),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE
-	/*
-	 * *I*G - NAND
-	 * entry 14 and 15 has been used hard coded, they will be disabled
-	 * in cpu_init_f, so we use entry 16 for nand.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_64K, 1),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE
-	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
-		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 11, BOOKE_PAGESZ_256K, 1),
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-		      0, 12, BOOKE_PAGESZ_1G, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		      CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-		      0, 13, BOOKE_PAGESZ_1G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/T1040D4RDB_NAND_defconfig b/configs/T1040D4RDB_NAND_defconfig
deleted file mode 100644
index 87b2a76973..0000000000
--- a/configs/T1040D4RDB_NAND_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SDCARD_defconfig b/configs/T1040D4RDB_SDCARD_defconfig
deleted file mode 100644
index 4b9e428045..0000000000
--- a/configs/T1040D4RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SECURE_BOOT_defconfig b/configs/T1040D4RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index 7adffb73ea..0000000000
--- a/configs/T1040D4RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SPIFLASH_defconfig b/configs/T1040D4RDB_SPIFLASH_defconfig
deleted file mode 100644
index 2320b7214c..0000000000
--- a/configs/T1040D4RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0xFFFC9000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_defconfig b/configs/T1040D4RDB_defconfig
deleted file mode 100644
index eb25930ff7..0000000000
--- a/configs/T1040D4RDB_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig
deleted file mode 100644
index 7cf98473bd..0000000000
--- a/configs/T1040RDB_NAND_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig
deleted file mode 100644
index 321260fc8b..0000000000
--- a/configs/T1040RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index 910b984f47..0000000000
--- a/configs/T1040RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig
deleted file mode 100644
index 65ab4e0c79..0000000000
--- a/configs/T1040RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0xFFFC9000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig
deleted file mode 100644
index e8c5393b18..0000000000
--- a/configs/T1040RDB_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig
deleted file mode 100644
index 1602fb890e..0000000000
--- a/configs/T1042D4RDB_NAND_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
deleted file mode 100644
index a4a31bfd62..0000000000
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
diff --git a/configs/T1042D4RDB_SECURE_BOOT_defconfig b/configs/T1042D4RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index f460b17e4d..0000000000
--- a/configs/T1042D4RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig
deleted file mode 100644
index 697c08dbfa..0000000000
--- a/configs/T1042D4RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0xFFFC9000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig
deleted file mode 100644
index 70ddffb3a7..0000000000
--- a/configs/T1042D4RDB_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
diff --git a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig b/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
deleted file mode 100644
index 167325f83c..0000000000
--- a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=0
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_CRYPTO_SUPPORT=y
-CONFIG_SPL_HASH_SUPPORT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_NAND_defconfig b/configs/T1042RDB_PI_NAND_defconfig
deleted file mode 100644
index 90bbee2508..0000000000
--- a/configs/T1042RDB_PI_NAND_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_SDCARD_defconfig b/configs/T1042RDB_PI_SDCARD_defconfig
deleted file mode 100644
index ae664df4dd..0000000000
--- a/configs/T1042RDB_PI_SDCARD_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_SPIFLASH_defconfig b/configs/T1042RDB_PI_SPIFLASH_defconfig
deleted file mode 100644
index ef654653e5..0000000000
--- a/configs/T1042RDB_PI_SPIFLASH_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0xFFFC9000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_defconfig b/configs/T1042RDB_PI_defconfig
deleted file mode 100644
index 07ad865b6e..0000000000
--- a/configs/T1042RDB_PI_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index c5f39e82f6..0000000000
--- a/configs/T1042RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig
deleted file mode 100644
index c94730d79b..0000000000
--- a/configs/T1042RDB_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
deleted file mode 100644
index 4237dfcd6c..0000000000
--- a/include/configs/T104xRDB.h
+++ /dev/null
@@ -1,813 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * T104x RDB board configuration file
- */
-#include <asm/config_mpc85xx.h>
-
-#ifdef CONFIG_RAMBOOT_PBL
-
-#ifndef CONFIG_NXP_ESBC
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_PBI \
-		$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
-#endif
-
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_PAD_TO		0x40000
-#define CONFIG_SPL_MAX_SIZE		0x28000
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_SKIP_RELOCATE
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#undef CONFIG_DM_I2C
-#endif
-#define RESET_VECTOR_OFFSET		0x27FFC
-#define BOOT_PAGE_OFFSET		0x27000
-
-#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) + \
-					 CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
-#endif
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
-#define CONFIG_SPL_SPI_FLASH_MINIMAL
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(256 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define	CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
-#endif
-#endif
-
-#ifdef CONFIG_SDCARD
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
-#define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST	(0x30000000)
-#define CONFIG_SYS_MMC_U_BOOT_START	(0x30000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS	(260 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define	CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
-#endif
-#endif
-
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-
-/* support deep sleep */
-#define CONFIG_DEEP_SLEEP
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1			/* PCIE controller 1 */
-#define CONFIG_PCIE2			/* PCIE controller 2 */
-#define CONFIG_PCIE3			/* PCIE controller 3 */
-#define CONFIG_PCIE4			/* PCIE controller 4 */
-
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_MMC_ENV_DEV          0
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_BOOTSCRIPT_COPY_RAM
-#endif
-#endif
-
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	66666666
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
-#define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
-#define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_DDR_ECC
-#ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-#endif
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
-
-/*
- *  Config the L3 Cache as L3 SRAM
- */
-#define CONFIG_SYS_INIT_L3_ADDR		0xFFFC0000
-/*
- * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
- * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
- * (CONFIG_SYS_INIT_L3_VADDR) will be different.
- */
-#define CONFIG_SYS_INIT_L3_VADDR	0xFFFC0000
-#define CONFIG_SYS_L3_SIZE		256 << 10
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
-#define SPL_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(30 << 10)
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SPL_GD_ADDR + 64 * 1024)
-
-#define CONFIG_SYS_DCSRBAR		0xf0000000
-#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
-
-/*
- * DDR Setup
- */
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#define CONFIG_DDR_SPD
-
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#define SPD_EEPROM_ADDRESS	0x51
-
-#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
-
-/*
- * IFC Definitions
- */
-#define CONFIG_SYS_FLASH_BASE	0xe8000000
-#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-
-#define CONFIG_SYS_NOR_CSPR_EXT	(0xf)
-#define CONFIG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
-				CSPR_PORT_SIZE_16 | \
-				CSPR_MSEL_NOR | \
-				CSPR_V)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
-
-/*
- * TDM Definition
- */
-#define T1040_TDM_QUIRK_CCSR_BASE	0xfe000000
-
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
-				FTIM0_NOR_TEADC(0x5) | \
-				FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
-				FTIM1_NOR_TRAD_NOR(0x1A) |\
-				FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
-				FTIM2_NOR_TCH(0x4) | \
-				FTIM2_NOR_TWPH(0x0E) | \
-				FTIM2_NOR_TWP(0x1c))
-#define CONFIG_SYS_NOR_FTIM3	0x0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-
-/* CPLD on IFC */
-#define CPLD_LBMAP_MASK			0x3F
-#define CPLD_BANK_SEL_MASK		0x07
-#define CPLD_BANK_OVERRIDE		0x40
-#define CPLD_LBMAP_ALTBANK		0x44 /* BANK OR | BANK 4 */
-#define CPLD_LBMAP_DFLTBANK		0x40 /* BANK OR | BANK0 */
-#define CPLD_LBMAP_RESET		0xFF
-#define CPLD_LBMAP_SHIFT		0x03
-
-#if defined(CONFIG_TARGET_T1042RDB_PI)
-#define CPLD_DIU_SEL_DFP		0x80
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define CPLD_DIU_SEL_DFP		0xc0
-#endif
-
-#if defined(CONFIG_TARGET_T1040D4RDB)
-#define CPLD_INT_MASK_ALL		0xFF
-#define CPLD_INT_MASK_THERM		0x80
-#define CPLD_INT_MASK_DVI_DFP		0x40
-#define CPLD_INT_MASK_QSGMII1		0x20
-#define CPLD_INT_MASK_QSGMII2		0x10
-#define CPLD_INT_MASK_SGMI1		0x08
-#define CPLD_INT_MASK_SGMI2		0x04
-#define CPLD_INT_MASK_TDMR1		0x02
-#define CPLD_INT_MASK_TDMR2		0x01
-#endif
-
-#define CONFIG_SYS_CPLD_BASE	0xffdf0000
-#define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_CPLD_BASE)
-#define CONFIG_SYS_CSPR2_EXT	(0xf)
-#define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 \
-				| CSPR_MSEL_GPCM \
-				| CSPR_V)
-#define CONFIG_SYS_AMASK2	IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR2	0x0
-/* CPLD Timing parameters for IFC CS2 */
-#define CONFIG_SYS_CS2_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
-					FTIM0_GPCM_TEADC(0x0e) | \
-					FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS2_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
-					FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS2_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x8) | \
-					FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS2_FTIM3		0x0
-
-/* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_BASE		0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
-
-#define CONFIG_SYS_NAND_CSPR_EXT	(0xf)
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
-				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
-
-#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
-				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
-				| CSOR_NAND_PGS_4K	/* Page Size = 4K */ \
-				| CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
-				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
-					FTIM0_NAND_TWP(0x18)   | \
-					FTIM0_NAND_TWCHT(0x07) | \
-					FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
-					FTIM1_NAND_TWBE(0x39)  | \
-					FTIM1_NAND_TRR(0x0e)   | \
-					FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
-					FTIM2_NAND_TREH(0x0a) | \
-					FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3		0x0
-
-#define CONFIG_SYS_NAND_DDR_LAW		11
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
-
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR_CSPR_EXT
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008044
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_A008044_WORKAROUND
-#endif
-#endif
-
-#define CONFIG_HWCONFIG
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe03c000
-/* The assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
-	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
-	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
-
-#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
-/* Video */
-#define CONFIG_FSL_DIU_FB
-
-#ifdef CONFIG_FSL_DIU_FB
-#define CONFIG_FSL_DIU_CH7301
-#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-#endif
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED	400000	/* I2C speed in Hz */
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C3_SPEED	400000
-#define CONFIG_SYS_FSL_I2C4_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET	0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET	0x119100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
-#endif
-
-#define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
-/* I2C bus multiplexer */
-#define I2C_MUX_PCA_ADDR                0x70
-#define I2C_MUX_CH_DEFAULT      0x8
-
-#if defined(CONFIG_TARGET_T1042RDB_PI)	|| \
-	defined(CONFIG_TARGET_T1040D4RDB)	|| \
-	defined(CONFIG_TARGET_T1042D4RDB)
-/* LDI/DVI Encoder for display */
-#define CONFIG_SYS_I2C_LDI_ADDR		0x38
-#define CONFIG_SYS_I2C_DVI_ADDR		0x75
-#define CONFIG_SYS_I2C_DVI_BUS_NUM	0
-
-/*
- * RTC configuration
- */
-#define RTC
-#define CONFIG_RTC_DS1337               1
-#define CONFIG_SYS_I2C_RTC_ADDR         0x68
-
-/*DVI encoder*/
-#define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
-#endif
-
-/*
- * eSPI - Enhanced SPI
- */
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-/* controller 1, direct to uli, tgtid 3, Base address 20000 */
-#ifdef CONFIG_PCIE1
-#define	CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define	CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
-#endif
-
-/* controller 2, Slot 2, tgtid 2, Base address 201000 */
-#ifdef CONFIG_PCIE2
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0x90000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc10000000ull
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
-#endif
-
-/* controller 3, Slot 1, tgtid 1, Base address 202000 */
-#ifdef CONFIG_PCIE3
-#define CONFIG_SYS_PCIE3_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc20000000ull
-#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
-#endif
-
-/* controller 4, Base address 203000 */
-#ifdef CONFIG_PCIE4
-#define CONFIG_SYS_PCIE4_MEM_VIRT	0xb0000000
-#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc30000000ull
-#define CONFIG_SYS_PCIE4_IO_VIRT	0xf8030000
-#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
-#endif
-
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_DR_USB
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Qman/Bman */
-#ifndef CONFIG_NOBQFMAN
-#define CONFIG_SYS_BMAN_NUM_PORTALS	10
-#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
-#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
-#define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
-#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
-#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
-					CONFIG_SYS_BMAN_CENA_SIZE)
-#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
-#define CONFIG_SYS_QMAN_NUM_PORTALS	10
-#define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
-#define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
-#define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
-#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
-#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
-					CONFIG_SYS_QMAN_CENA_SIZE)
-#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
-
-#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_DPAA_PME
-
-#define CONFIG_U_QE
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR		0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x920)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_QE_FW_ADDR		(7 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
-#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#endif /* CONFIG_NOBQFMAN */
-
-#ifdef CONFIG_FMAN_ENET
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_TARGET_T1040D4RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
-#define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
-#define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
-#endif
-
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
-#define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
-#define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
-#else
-#define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
-#define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
-#endif
-
-/* Enable VSC9953 L2 Switch driver on T1040 SoC */
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
-#define CONFIG_VSC9953
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x04
-#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x08
-#else
-#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x08
-#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x0c
-#endif
-#endif
-
-#define CONFIG_ETHPRIME		"FM1 at DTSEC4"
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Dynamic MTD Partition support with mtdparts
- */
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define __USB_PHY_TYPE	utmi
-#define RAMDISKFILE	"t104xrdb/ramdisk.uboot"
-
-#ifdef CONFIG_TARGET_T1040RDB
-#define FDTFILE		"t1040rdb/t1040rdb.dtb"
-#elif defined(CONFIG_TARGET_T1042RDB_PI)
-#define FDTFILE		"t1042rdb_pi/t1042rdb_pi.dtb"
-#elif defined(CONFIG_TARGET_T1042RDB)
-#define FDTFILE		"t1042rdb/t1042rdb.dtb"
-#elif defined(CONFIG_TARGET_T1040D4RDB)
-#define FDTFILE		"t1042rdb/t1040d4rdb.dtb"
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define FDTFILE		"t1042rdb/t1042d4rdb.dtb"
-#endif
-
-#ifdef CONFIG_FSL_DIU_FB
-#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32 at 60,monitor=dvi"
-#else
-#define DIU_ENVIRONMENT
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"			\
-	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
-	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
-	"netdev=eth0\0"						\
-	"video-mode=" __stringify(DIU_ENVIRONMENT) "\0"		\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
-	"tftpflash=tftpboot $loadaddr $uboot && "		\
-	"protect off $ubootaddr +$filesize && "			\
-	"erase $ubootaddr +$filesize && "			\
-	"cp.b $loadaddr $ubootaddr $filesize && "		\
-	"protect on $ubootaddr +$filesize && "			\
-	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
-	"consoledev=ttyS0\0"					\
-	"ramdiskaddr=2000000\0"					\
-	"ramdiskfile=" __stringify(RAMDISKFILE) "\0"		\
-	"fdtaddr=1e00000\0"					\
-	"fdtfile=" __stringify(FDTFILE) "\0"			\
-	"bdev=sda3\0"
-
-#define CONFIG_LINUX                       \
-	"setenv bootargs root=/dev/ram rw "            \
-	"console=$consoledev,$baudrate $othbootargs;"  \
-	"setenv ramdiskaddr 0x02000000;"               \
-	"setenv fdtaddr 0x00c00000;"		       \
-	"setenv loadaddr 0x1000000;"		       \
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_HDBOOT					\
-	"setenv bootargs root=/dev/$bdev rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND			\
-	"setenv bootargs root=/dev/nfs rw "	\
-	"nfsroot=$serverip:$rootpath "		\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND				\
-	"setenv bootargs root=/dev/ram rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $ramdiskaddr $ramdiskfile;"		\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
