diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 5ca4a6e8ba..0ba6fe6daa 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1589,7 +1589,6 @@ config SYS_FSL_LBC_CLK_DIV
 		Defines divider of platform clock(clock input to
 		eLBC controller).
 
-source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
diff --git a/board/freescale/c29xpcie/Kconfig b/board/freescale/c29xpcie/Kconfig
deleted file mode 100644
index 51e25c39df..0000000000
--- a/board/freescale/c29xpcie/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_C29XPCIE
-
-config SYS_BOARD
-	default "c29xpcie"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "C29XPCIE"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/c29xpcie/MAINTAINERS b/board/freescale/c29xpcie/MAINTAINERS
deleted file mode 100644
index 44af12cdbe..0000000000
--- a/board/freescale/c29xpcie/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-C29XPCIE BOARD
-M:	Po Liu <po.liu at nxp.com>
-S:	Maintained
-F:	board/freescale/c29xpcie/
-F:	include/configs/C29XPCIE.h
-F:	configs/C29XPCIE_defconfig
-F:	configs/C29XPCIE_NAND_defconfig
-F:	configs/C29XPCIE_SPIFLASH_defconfig
-F:	configs/C29XPCIE_NOR_SECBOOT_defconfig
-F:	configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile
deleted file mode 100644
index 2a9c1be802..0000000000
--- a/board/freescale/c29xpcie/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Freescale Semiconductor, Inc.
-#
-
-MINIMAL=
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-obj-y	+= spl_minimal.o
-else
-ifdef CONFIG_SPL_BUILD
-obj-y	+= spl.o
-endif
-obj-y	+= c29xpcie.o
-obj-y	+= cpld.o
-obj-y	+= ddr.o
-endif
-
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
deleted file mode 100644
index 2e249cbb3a..0000000000
--- a/board/freescale/c29xpcie/README
+++ /dev/null
@@ -1,100 +0,0 @@
-Overview
-=========
-C29XPCIE board is a series of Freescale PCIe add-in cards to perform
-as public key crypto accelerator or secure key management module.
-It includes C293PCIE board, C293PCIE board and C291PCIE board.
-The Freescale C29x family is a high performance crypto co-processor.
-It combines a single e500v2 core with necessary SEC engines.
-(maximum core frequency 1000/1200 MHz).
-
-The C29xPCIE board features are as follows:
-Memory subsystem:
-	- 512Mbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus)
-	- 64 Mbyte NOR flash single-chip memory
-	- 4 Gbyte NAND flash memory
-	- 1 Mbit AT24C1024 I2C EEPROM
-	- 16 Mbyte SPI memory
-
-Interfaces:
-	- 10/100/1000 BaseT Ethernet ports:
-		- eTSEC1, RGMII: one 10/100/1000 port
-		- eTSEC2, RGMII: one 10/100/1000 port
-	- DUART interface:
-		- DUART interface: supports two UARTs up to 115200 bps for
-		   console display
-
-Board connectors:
-	- Mini-ITX power supply connector
-	- JTAG/COP for debugging
-
-Physical Memory Map on C29xPCIE
-===============================
-Address Start   Address End   Memory type
-0x0_0000_0000 - 0x0_1fff_ffff   512MB DDR
-0xc_0000_0000 - 0xc_8fff_ffff   256MB PCIE memory
-0xf_ec00_0000 - 0xf_efff_ffff   64MB NOR flash
-0xf_ffb0_0000 - 0xf_ffb7_ffff   512KB SRAM
-0xf_ffc0_0000 - 0xf_ffc0_ffff   64KB PCIE IO
-0xf_ffdf_0000 - 0xf_ffdf_0fff   4KB CPLD
-0xf_ffe0_0000 - 0xf_ffef_ffff   1MB CCSR
-
-Serial Port Configuration on C29xPCIE
-=====================================
-Configure the serial port of the attached computer with the following values:
-	-Data rate: 115200 bps
-	-Number of data bits: 8
-	-Parity: None
-	-Number of Stop bits: 1
-	-Flow Control: Hardware/None
-
-Settings of DIP-switch
-======================
-  SW5[1:4]= 1111 and SW5[6]=0 for boot from 16bit NOR flash
-  SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash
-Note: 1 stands for 'off', 0 stands for 'on'
-
-Build and program U-Boot to NOR flash
-==================================
-1. Build u-boot.bin image example:
-	export ARCH=powerpc
-	export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
-	make C293PCIE
-
-2. Program u-boot.bin into NOR flash
-	=> tftp $loadaddr $uboot
-	=> protect off eff40000 +$filesize
-	=> erase eff40000 +$filesize
-	=> cp.b $loadaddr eff40000 $filesize
-
-3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on.
-
-Alternate NOR bank
-==================
-There are four banks in C29XPCIE board, example to change bank booting:
-1. Program u-boot.bin into alternate NOR bank
-	=> tftp $loadaddr $uboot
-	=> protect off e9f40000 +$filesize
-	=> erase e9f40000 +$filesize
-	=> cp.b $loadaddr e9f40000 $filesize
-
-2. Switch to alternate NOR bank
-	=> cpld_cmd reset altbank [bank]
-	- [bank] bank value select 1-4
-	- bank 1 on the flash 0x0000000~0x0ffffff
-	- bank 2 on the flash 0x1000000~0x1ffffff
-	- bank 3 on the flash 0x2000000~0x2ffffff
-	- bank 4 on the flash 0x3000000~0x3ffffff
-	or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again.
-
-Build and program U-Boot to SPI flash
-==================================
-1. Build u-boot-spi.bin image
-	make C29xPCIE_SPIFLASH_config; make
-	Need the boot_format tool to generate u-boot-spi.bin from the u-boot.bin.
-
-2. Program u-boot-spi.bin into SPI flash
-	=> tftp $loadaddr $uboot-spi
-	=> sf erase 0 100000
-	=> sf write $loadaddr 0 $filesize
-
-3. Check SW5[1:4]= 0110 and SW5[6]=0, then power on.
diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c
deleted file mode 100644
index 74502c6d18..0000000000
--- a/board/freescale/c29xpcie/c29xpcie.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/io.h>
-#include <env.h>
-#include <miiphy.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <mmc.h>
-#include <netdev.h>
-#include <pci.h>
-#include <fsl_ifc.h>
-#include <asm/fsl_pci.h>
-
-#include "cpld.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	struct cpu_type *cpu = gd->arch.cpu;
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	printf("Board: %sPCIe, ", cpu->name);
-	printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver));
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-
-	/* Clock configuration to access CPLD using IFC(GPCM) */
-	setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned long flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 1;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_64M, 1);
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* ifdef CONFIG_PCI */
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[2];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-	/* Register 1G MDIO bus */
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-#endif
-
-	return pci_eth_init(bis);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void fdt_del_sec(void *blob, int offset)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0",
-			CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET
-			+ offset * CONFIG_SYS_FSL_SEC_IDX_OFFSET)) >= 0) {
-		fdt_del_node(blob, nodeoff);
-		offset++;
-	}
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-	struct cpu_type *cpu;
-
-	cpu = gd->arch.cpu;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-#if defined(CONFIG_PCI)
-	FT_FSL_PCI_SETUP;
-#endif
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-	if (cpu->soc_ver == SVR_C291)
-		fdt_del_sec(blob, 1);
-	else if (cpu->soc_ver == SVR_C292)
-		fdt_del_sec(blob, 2);
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c
deleted file mode 100644
index 826af428ce..0000000000
--- a/board/freescale/c29xpcie/cpld.c
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/**
- * Copyright 2013 Freescale Semiconductor
- * Author: Mingkai Hu <Mingkai.hu at freescale.com>
- *         Po Liu <Po.Liu at freescale.com>
- *
- * This file provides support for the board-specific CPLD used on some Freescale
- * reference boards.
- *
- * The following macros need to be defined:
- *
- * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the
- * CPLD register map
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#include "cpld.h"
-/**
- * Set the boot bank to the alternate bank
- */
-void cpld_set_altbank(u8 banksel)
-{
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-	u8 reg11;
-
-	reg11 = in_8(&cpld_data->flhcsr);
-
-	switch (banksel) {
-	case 1:
-		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
-			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK1);
-		break;
-	case 2:
-		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
-			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK2);
-		break;
-	case 3:
-		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
-			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK3);
-		break;
-	case 4:
-		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
-			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK4);
-		break;
-	default:
-		printf("Invalid value! [1-4]\n");
-		return;
-	}
-
-	udelay(100);
-	do_reset(NULL, 0, 0, NULL);
-}
-
-/**
- * Set the boot bank to the default bank
- */
-void cpld_set_defbank(void)
-{
-	cpld_set_altbank(4);
-}
-
-#ifdef DEBUG
-static void cpld_dump_regs(void)
-{
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	printf("chipid1		= 0x%02x\n", in_8(&cpld_data->chipid1));
-	printf("chipid2		= 0x%02x\n", in_8(&cpld_data->chipid2));
-	printf("hwver		= 0x%02x\n", in_8(&cpld_data->hwver));
-	printf("cpldver		= 0x%02x\n", in_8(&cpld_data->cpldver));
-	printf("rstcon		= 0x%02x\n", in_8(&cpld_data->rstcon));
-	printf("flhcsr		= 0x%02x\n", in_8(&cpld_data->flhcsr));
-	printf("wdcsr		= 0x%02x\n", in_8(&cpld_data->wdcsr));
-	printf("wdkick		= 0x%02x\n", in_8(&cpld_data->wdkick));
-	printf("fancsr		= 0x%02x\n", in_8(&cpld_data->fancsr));
-	printf("ledcsr		= 0x%02x\n", in_8(&cpld_data->ledcsr));
-	printf("misc		= 0x%02x\n", in_8(&cpld_data->misccsr));
-	printf("bootor		= 0x%02x\n", in_8(&cpld_data->bootor));
-	printf("bootcfg1	= 0x%02x\n", in_8(&cpld_data->bootcfg1));
-	printf("bootcfg2	= 0x%02x\n", in_8(&cpld_data->bootcfg2));
-	printf("bootcfg3	= 0x%02x\n", in_8(&cpld_data->bootcfg3));
-	printf("bootcfg4	= 0x%02x\n", in_8(&cpld_data->bootcfg4));
-	putc('\n');
-}
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-int cpld_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	int rc = 0;
-	unsigned char value;
-
-	if (argc <= 1)
-		return cmd_usage(cmdtp);
-
-	if (strcmp(argv[1], "reset") == 0) {
-		if (!strcmp(argv[2], "altbank") && argv[3]) {
-			value = (u8)simple_strtoul(argv[3], NULL, 16);
-			cpld_set_altbank(value);
-		} else if (!argv[2])
-			cpld_set_defbank();
-		else
-			cmd_usage(cmdtp);
-#ifdef DEBUG
-	} else if (strcmp(argv[1], "dump") == 0) {
-		cpld_dump_regs();
-#endif
-	} else
-		rc = cmd_usage(cmdtp);
-
-	return rc;
-}
-
-U_BOOT_CMD(
-	cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd,
-	"Reset the board using the CPLD sequencer",
-	"reset - hard reset to default bank 4\n"
-	"cpld_cmd reset altbank [bank]- reset to alternate bank\n"
-	"	- [bank] bank value select 1-4\n"
-	"	- bank 1 on the flash 0x0000000~0x0ffffff\n"
-	"	- bank 2 on the flash 0x1000000~0x1ffffff\n"
-	"	- bank 3 on the flash 0x2000000~0x2ffffff\n"
-	"	- bank 4 on the flash 0x3000000~0x3ffffff\n"
-#ifdef DEBUG
-	"cpld_cmd dump - display the CPLD registers\n"
-#endif
-	);
-#endif
diff --git a/board/freescale/c29xpcie/cpld.h b/board/freescale/c29xpcie/cpld.h
deleted file mode 100644
index 02e9160854..0000000000
--- a/board/freescale/c29xpcie/cpld.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/**
- * Copyright 2013 Freescale Semiconductor
- * Author: Mingkai Hu <Mingkai.Hu at freescale.com>
- *         Po Liu <Po.Liu at freescale.com>
- *
- * This file provides support for the ngPIXIS, a board-specific FPGA used on
- * some Freescale reference boards.
- */
-
-/*
- * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
- */
-struct cpld_data {
-	u8 chipid1;	/* 0x0 - CPLD Chip ID1 Register */
-	u8 chipid2;	/* 0x1 - CPLD Chip ID2 Register */
-	u8 hwver;	/* 0x2 - Hardware Version Register */
-	u8 cpldver;	/* 0x3 - Software Version Register */
-	u8 res[12];
-	u8 rstcon;	/* 0x10 - Reset control register */
-	u8 flhcsr;	/* 0x11 - Flash control and status Register */
-	u8 wdcsr;	/* 0x12 - Watchdog control and status Register */
-	u8 wdkick;	/* 0x13 - Watchdog kick Register */
-	u8 fancsr;	/* 0x14 - Fan control and status Register */
-	u8 ledcsr;	/* 0x15 - LED control and status Register */
-	u8 misccsr;	/* 0x16 - Misc control and status Register */
-	u8 bootor;	/* 0x17 - Boot configure override Register */
-	u8 bootcfg1;	/* 0x18 - Boot configure 1 Register */
-	u8 bootcfg2;	/* 0x19 - Boot configure 2 Register */
-	u8 bootcfg3;	/* 0x1a - Boot configure 3 Register */
-	u8 bootcfg4;	/* 0x1b - Boot configure 4 Register */
-};
-
-#define CPLD_BANKSEL_EN		0x02
-#define CPLD_BANKSEL_MASK	0x3f
-#define CPLD_SELECT_BANK1	0xc0
-#define CPLD_SELECT_BANK2	0x80
-#define CPLD_SELECT_BANK3	0x40
-#define CPLD_SELECT_BANK4	0x00
diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c
deleted file mode 100644
index 5795a27f65..0000000000
--- a/board/freescale/c29xpcie/ddr.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-#include "cpld.h"
-
-#define C29XPCIE_HARDWARE_REVA	0x40
-/*
- * Micron MT41J128M16HA-15E
- * */
-dimm_params_t ddr_raw_timing = {
-	.n_ranks = 1,
-	.rank_density = 536870912u,
-	.capacity = 536870912u,
-	.primary_sdram_width = 32,
-	.ec_sdram_width = 8,
-	.registered_dimm = 0,
-	.mirrored_dimm = 0,
-	.n_row_addr = 14,
-	.n_col_addr = 10,
-	.n_banks_per_sdram_device = 8,
-	.edc_config = 2,
-	.burst_lengths_bitmask = 0x0c,
-
-	.tckmin_x_ps = 1650,
-	.caslat_x = 0x7e << 4,	/* 5,6,7,8,9,10 */
-	.taa_ps = 14050,
-	.twr_ps = 15000,
-	.trcd_ps = 13500,
-	.trrd_ps = 75000,
-	.trp_ps = 13500,
-	.tras_ps = 40000,
-	.trc_ps = 49500,
-	.trfc_ps = 160000,
-	.twtr_ps = 75000,
-	.trtp_ps = 75000,
-	.refresh_rate_ps = 7800000,
-	.tfaw_ps = 30000,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
-		unsigned int controller_number,
-		unsigned int dimm_number)
-{
-	const char dimm_model[] = "Fixed DDR on board";
-
-	if ((controller_number == 0) && (dimm_number == 0)) {
-		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
-		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
-		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
-	}
-
-	return 0;
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-	int i;
-
-	popts->clk_adjust = 4;
-	popts->cpo_override = 0x1f;
-	popts->write_data_delay = 4;
-	popts->half_strength_driver_enable = 1;
-	popts->bstopre = 0x3cf;
-	popts->quad_rank_present = 1;
-	popts->rtt_override = 1;
-	popts->rtt_override_value = 1;
-	popts->dynamic_power = 1;
-	/* Write leveling override */
-	popts->wrlvl_en = 1;
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-	popts->wrlvl_start = 0x4;
-	popts->trwt_override = 1;
-	popts->trwt = 0;
-
-	if (in_8(&cpld_data->hwver) == C29XPCIE_HARDWARE_REVA)
-		popts->ecc_mode = 0;
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
-		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
-	}
-}
-
-void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
-{
-	int ret = i2c_read(i2c_address, 0, 2, (uint8_t *)spd,
-				sizeof(generic_spd_eeprom_t));
-
-	if (ret) {
-		printf("DDR: failed to read SPD from address %u\n",
-				i2c_address);
-		memset(spd, 0, sizeof(generic_spd_eeprom_t));
-	}
-}
diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c
deleted file mode 100644
index 6d441d87a7..0000000000
--- a/board/freescale/c29xpcie/law.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC),
-	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-	SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K,
-					LAW_TRGT_IF_PLATFORM_SRAM),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c
deleted file mode 100644
index 421c2d4b1f..0000000000
--- a/board/freescale/c29xpcie/spl.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env_internal.h>
-#include <init.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	console_init_f();
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	bd_t *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-	arch_cpu_init();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-	/* relocate environment function pointers etc. */
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)SPL_ENV_ADDR);
-	gd->env_addr  = (ulong)(SPL_ENV_ADDR);
-	gd->env_valid = ENV_VALID;
-
-	i2c_init_all();
-
-	dram_init();
-
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("TPL\n");
-#else
-	puts("SPL\n");
-#endif
-
-	nand_boot();
-}
diff --git a/board/freescale/c29xpcie/spl_minimal.c b/board/freescale/c29xpcie/spl_minimal.c
deleted file mode 100644
index 8193afdf6a..0000000000
--- a/board/freescale/c29xpcie/spl_minimal.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <mpc85xx.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot...\n");
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	puts("SPL\n");
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c
deleted file mode 100644
index ef844a0b3d..0000000000
--- a/board/freescale/c29xpcie/tlb.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 1, BOOKE_PAGESZ_64M, 1),
-
-#ifdef CONFIG_PCI
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 2, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 3, BOOKE_PAGESZ_256K, 1),
-#endif
-#endif
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_64K, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_64K, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE,
-			CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 6, BOOKE_PAGESZ_256K, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE + 0x40000,
-			CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS + 0x40000,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 7, BOOKE_PAGESZ_256K, 1),
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-		(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE,
-			CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-			0, 8, BOOKE_PAGESZ_256M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-			CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-			0, 9, BOOKE_PAGESZ_256M, 1),
-#endif
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
-		      0, 12, BOOKE_PAGESZ_256K, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig
deleted file mode 100644
index cdcf50eee8..0000000000
--- a/configs/C29XPCIE_NAND_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x100000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_C29XPCIE=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=-1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig
deleted file mode 100644
index e43c72860a..0000000000
--- a/configs/C29XPCIE_NOR_SECBOOT_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_C29XPCIE=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=-1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_DOS_PARTITION=y
-CONFIG_DM=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
deleted file mode 100644
index b7eb77e2a0..0000000000
--- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_C29XPCIE=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=-1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_DOS_PARTITION=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig
deleted file mode 100644
index 9bfdcd0461..0000000000
--- a/configs/C29XPCIE_SPIFLASH_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_C29XPCIE=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=-1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig
deleted file mode 100644
index 3e7f19692a..0000000000
--- a/configs/C29XPCIE_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_C29XPCIE=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=-1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
deleted file mode 100644
index 9a8cba6b7c..0000000000
--- a/include/configs/C29XPCIE.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-/*
- * C29XPCIE board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#endif
-
-#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SPL_MAX_SIZE		(128 << 10)
-#define CONFIG_TPL_TEXT_BASE		0xf8f81000
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(832 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_NAND_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_MAX_SIZE		8192
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
-#define CONFIG_SYS_NAND_U_BOOT_START	0xf8f80000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
-#endif
-#define CONFIG_SPL_PAD_TO		0x20000
-#define CONFIG_TPL_PAD_TO		0x20000
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#endif
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_TPL_TEXT_BASE
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-/*
- * PCI Windows
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-/* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"Slot 1"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_DDR_CLK_FREQ	100000000
-#define CONFIG_SYS_CLK_FREQ	66666666
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch predition */
-
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_ADDR_MAP			1
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-
-/* DDR Setup */
-#define CONFIG_DDR_SPD
-#define CONFIG_SYS_SPD_BUS_NUM		0
-#define SPD_EEPROM_ADDRESS		0x50
-#define CONFIG_SYS_DDR_RAW_TIMING
-
-/* DDR ECC Setup*/
-#define CONFIG_DDR_ECC
-#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-
-#define CONFIG_SYS_SDRAM_SIZE		512
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* Platform SRAM setting  */
-#define CONFIG_SYS_PLATFORM_SRAM_BASE	0xffb00000
-#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
-			(0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
-#define CONFIG_SYS_PLATFORM_SRAM_SIZE	(512 << 10)
-
-/*
- * IFC Definitions
- */
-/* NOR Flash on IFC */
-#define CONFIG_SYS_FLASH_BASE		0xec000000
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
-
-#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* in ms */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* in ms */
-
-/* 16Bit NOR Flash - S29GL512S10TFI01 */
-#define CONFIG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
-				CSPR_PORT_SIZE_16 | \
-				CSPR_MSEL_NOR | \
-				CSPR_V)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(64*1024*1024)
-#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(4)
-
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
-				FTIM0_NOR_TEADC(0x5) | \
-				FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
-				FTIM1_NOR_TRAD_NOR(0x1A) |\
-				FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
-				FTIM2_NOR_TCH(0x4) | \
-				FTIM2_NOR_TWPH(0x0E) | \
-				FTIM2_NOR_TWP(0x1c))
-#define CONFIG_SYS_NOR_FTIM3	0x0
-
-/* CFI for NOR Flash */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_BASE		0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
-
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(1024 * 1024)
-
-/* 8Bit NAND Flash - K9F1G08U0B */
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 \
-				| CSPR_MSEL_NAND \
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
-#define CONFIG_SYS_NAND_OOBSIZE	0x00000280	/* 640b */
-#define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
-				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
-				| CSOR_NAND_PGS_8K	/* Page Size = 8K */ \
-				| CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
-				| CSOR_NAND_PB(128))	/*128 Pages Per Block*/
-#define CONFIG_SYS_NAND_FTIM0	(FTIM0_NAND_TCCST(0x01) | \
-				FTIM0_NAND_TWP(0x0c)   | \
-				FTIM0_NAND_TWCHT(0x08) | \
-				FTIM0_NAND_TWH(0x06))
-#define CONFIG_SYS_NAND_FTIM1	(FTIM1_NAND_TADLE(0x28) | \
-				FTIM1_NAND_TWBE(0x1d)  | \
-				FTIM1_NAND_TRR(0x08)   | \
-				FTIM1_NAND_TRP(0x0c))
-#define CONFIG_SYS_NAND_FTIM2	(FTIM2_NAND_TRAD(0x0c) | \
-				FTIM2_NAND_TREH(0x0a) | \
-				FTIM2_NAND_TWHRE(0x18))
-#define CONFIG_SYS_NAND_FTIM3	(FTIM3_NAND_TWW(0x04))
-
-#define CONFIG_SYS_NAND_DDR_LAW		11
-
-/* Set up IFC registers for boot location NOR/NAND */
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CSOR0_EXT		CONFIG_SYS_NAND_OOBSIZE
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CSOR1_EXT		CONFIG_SYS_NAND_OOBSIZE
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-#endif
-
-/* CPLD on IFC, selected by CS2 */
-#define CONFIG_SYS_CPLD_BASE		0xffdf0000
-#define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull \
-					| CONFIG_SYS_CPLD_BASE)
-
-#define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 \
-				| CSPR_MSEL_GPCM \
-				| CSPR_V)
-#define CONFIG_SYS_AMASK2	IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR2	0x0
-/* CPLD Timing parameters for IFC CS2 */
-#define CONFIG_SYS_CS2_FTIM0	(FTIM0_GPCM_TACSE(0x0e) | \
-				FTIM0_GPCM_TEADC(0x0e) | \
-				FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS2_FTIM1	(FTIM1_GPCM_TACO(0x0e) | \
-				FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS2_FTIM2	(FTIM2_GPCM_TCS(0x0e) | \
-				FTIM2_GPCM_TCH(0x8) | \
-				FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS2_FTIM3	0x0
-
-#if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
-						- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)
-
-/*
- * Config the L2 Cache as L2 SRAM
- */
-#if defined(CONFIG_SPL_BUILD)
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
-#else
-#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x3000)
-#define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
-#endif
-#endif
-#endif
-
-/* Serial Port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-
-/* I2C EEPROM */
-/* enable read and write access to EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-
-/* eSPI - Enhanced SPI */
-
-#ifdef CONFIG_TSEC_ENET
-#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
-#define CONFIG_TSEC1		1
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2		1
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-
-/* Default mode is RGMII mode */
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		2
-
-#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#if defined(CONFIG_SYS_RAMBOOT)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define SPL_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
-#else
-#define CONFIG_ENV_RANGE	CONFIG_ENV_SIZE
-#endif
-#endif
-
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
-
-/*
- * Environment Configuration
- */
-
-#ifdef CONFIG_TSEC_ENET
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin/* U-Boot image on TFTP server */
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_DEF_HWCONFIG	fsl_ddr:ecc=on
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\
-	"netdev=eth0\0"						\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"loadaddr=1000000\0"				\
-	"consoledev=ttyS0\0"				\
-	"ramdiskaddr=2000000\0"				\
-	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
-	"fdtaddr=1e00000\0"				\
-	"fdtfile=name/of/device-tree.dtb\0"			\
-	"othbootargs=ramdisk_size=600000\0"		\
-
-#define CONFIG_RAMBOOTCOMMAND			\
-	"setenv bootargs root=/dev/ram rw "	\
-	"console=$consoledev,$baudrate $othbootargs; "	\
-	"tftp $ramdiskaddr $ramdiskfile;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
