From patchwork Wed May 27 16:46:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246734 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 22:16:37 +0530 Subject: [PATCH 06/24] arm: Remove configs/MPC8536DS_36BIT_defconfig board In-Reply-To: <20200527164655.177741-1-jagan@amarulasolutions.com> References: <20200527164655.177741-1-jagan@amarulasolutions.com> Message-ID: <20200527164655.177741-7-jagan@amarulasolutions.com> This board has not been converted to CONFIG_DM_SPI by the deadline. Remove it. Patch-cc: Priyanka Jain Signed-off-by: Jagan Teki Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/freescale/mpc8536ds/Kconfig | 12 - board/freescale/mpc8536ds/MAINTAINERS | 9 - board/freescale/mpc8536ds/Makefile | 10 - board/freescale/mpc8536ds/README | 127 ----- board/freescale/mpc8536ds/ddr.c | 59 --- board/freescale/mpc8536ds/law.c | 19 - board/freescale/mpc8536ds/mpc8536ds.c | 293 ------------ board/freescale/mpc8536ds/tlb.c | 70 --- configs/MPC8536DS_36BIT_defconfig | 61 --- configs/MPC8536DS_SDCARD_defconfig | 60 --- configs/MPC8536DS_SPIFLASH_defconfig | 61 --- configs/MPC8536DS_defconfig | 60 --- include/configs/MPC8536DS.h | 642 -------------------------- 14 files changed, 1484 deletions(-) delete mode 100644 board/freescale/mpc8536ds/Kconfig delete mode 100644 board/freescale/mpc8536ds/MAINTAINERS delete mode 100644 board/freescale/mpc8536ds/Makefile delete mode 100644 board/freescale/mpc8536ds/README delete mode 100644 board/freescale/mpc8536ds/ddr.c delete mode 100644 board/freescale/mpc8536ds/law.c delete mode 100644 board/freescale/mpc8536ds/mpc8536ds.c delete mode 100644 board/freescale/mpc8536ds/tlb.c delete mode 100644 configs/MPC8536DS_36BIT_defconfig delete mode 100644 configs/MPC8536DS_SDCARD_defconfig delete mode 100644 configs/MPC8536DS_SPIFLASH_defconfig delete mode 100644 configs/MPC8536DS_defconfig delete mode 100644 include/configs/MPC8536DS.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index f58755873c..1842d71f24 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1590,7 +1590,6 @@ config SYS_FSL_LBC_CLK_DIV eLBC controller). source "board/freescale/corenet_ds/Kconfig" -source "board/freescale/mpc8536ds/Kconfig" source "board/freescale/mpc8541cds/Kconfig" source "board/freescale/mpc8544ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" diff --git a/board/freescale/mpc8536ds/Kconfig b/board/freescale/mpc8536ds/Kconfig deleted file mode 100644 index 1a6a9d4598..0000000000 --- a/board/freescale/mpc8536ds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC8536DS - -config SYS_BOARD - default "mpc8536ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8536DS" - -endif diff --git a/board/freescale/mpc8536ds/MAINTAINERS b/board/freescale/mpc8536ds/MAINTAINERS deleted file mode 100644 index 5ce5164e49..0000000000 --- a/board/freescale/mpc8536ds/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -MPC8536DS BOARD -M: Priyanka Jain -S: Maintained -F: board/freescale/mpc8536ds/ -F: include/configs/MPC8536DS.h -F: configs/MPC8536DS_defconfig -F: configs/MPC8536DS_36BIT_defconfig -F: configs/MPC8536DS_SDCARD_defconfig -F: configs/MPC8536DS_SPIFLASH_defconfig diff --git a/board/freescale/mpc8536ds/Makefile b/board/freescale/mpc8536ds/Makefile deleted file mode 100644 index 6b936aa299..0000000000 --- a/board/freescale/mpc8536ds/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2008 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. - -obj-y += mpc8536ds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/mpc8536ds/README b/board/freescale/mpc8536ds/README deleted file mode 100644 index 2a38bd6dda..0000000000 --- a/board/freescale/mpc8536ds/README +++ /dev/null @@ -1,127 +0,0 @@ -Overview: -========= - -The MPC8536E integrates a PowerPC processor core with system logic -required for imaging, networking, and communications applications. - -Boot from NAND: -=============== - -The MPC8536E is capable of booting from NAND flash which uses the image -u-boot-nand.bin. This image contains two parts: a first stage image(also -call 4K NAND loader and a second stage image. The former is appended to -the latter to produce u-boot-nand.bin. - -The bootup process can be divided into two stages: the first stage will -configure the L2SRAM, then copy the second stage image to L2SRAM and jump -to it. The second stage image is to configure all the hardware and boot up -to U-Boot command line. - -The 4K NAND loader's code comes from the corresponding nand_spl directory, -along with the code twisted by CONFIG_NAND_SPL. The macro CONFIG_NAND_SPL -is mainly used to shrink the code size to the 4K size limitation. - -The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the -second stage image. It's set in the board config file when boot from NAND -is selected. - -Build and boot steps --------------------- - -1. Building image - make MPC8536DS_NAND_config - make CROSS_COMPILE=powerpc-none-linux-gnuspe- all - -2. Change dip-switch - SW2[5-8] = 1011 - SW9[1-3] = 101 - Note: 1 stands for 'on', 0 stands for 'off' - -3. Flash image - tftp 1000000 u-boot-nand.bin - nand erase 0 a0000 - nand write 1000000 0 a0000 - -Boot from On-chip ROM: -====================== - -The MPC8536E is capable of booting from the on-chip ROM - boot from eSDHC -and boot from eSPI. When power on, the porcessor excutes the ROM code to -initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from -the memory device that interfaced to the controller, such as the SDCard or -SPI EEPROM, to the target memory, e.g. SDRAM or L2SRAM, then boot from it. - -The memory device should contain a specific data structure with control word -and config word at the fixed address. The config word direct the process how -to config the memory device, and the control word direct the processor where -to find the image on the memory device, or where copy the main image to. The -user can use any method to store the data structure to the memory device, only -if store it on the assigned address. - -Build and boot steps --------------------- - -For boot from eSDHC: -1. Build image - make MPC8536DS_SDCARD_config - make CROSS_COMPILE=powerpc-none-linux-gnuspe- all - -2. Change dip-switch - SW2[5-8] = 0111 - SW3[1] = 0 - SW8[7] = 0 - The on-board SD/MMC slot is active - SW8[7] = 1 - The externel SD/MMC slot is active - -3. Put image to SDCard - Put the follwing info at the assigned address on the SDCard: - - Offset | Data | Description - -------------------------------------------------------- - | 0x40-0x43 | 0x424F4F54 | BOOT signature | - -------------------------------------------------------- - | 0x48-0x4B | 0x00080000 | u-boot.bin's size | - -------------------------------------------------------- - | 0x50-0x53 | 0x???????? | u-boot.bin's Addr on SDCard | - -------------------------------------------------------- - | 0x58-0x5B | 0xF8F80000 | Target Address | - ------------------------------------------------------- - | 0x60-0x63 | 0xF8FFF000 | Execution Starting Address | - -------------------------------------------------------- - | 0x68-0x6B | 0x6 | Number of Config Addr/Data | - -------------------------------------------------------- - | 0x80-0x83 | 0xFF720100 | Config Addr 1 | - | 0x84-0x87 | 0xF8F80000 | Config Data 1 | - -------------------------------------------------------- - | 0x88-0x8b | 0xFF720e44 | Config Addr 2 | - | 0x8c-0x8f | 0x0000000C | Config Data 2 | - -------------------------------------------------------- - | 0x90-0x93 | 0xFF720000 | Config Addr 3 | - | 0x94-0x97 | 0x80010000 | Config Data 3 | - -------------------------------------------------------- - | 0x98-0x9b | 0xFF72e40c | Config Addr 4 | - | 0x9c-0x9f | 0x00000040 | Config Data 4 | - -------------------------------------------------------- - | 0xa0-0xa3 | 0x40000001 | Config Addr 5 | - | 0xa4-0xa7 | 0x00000100 | Config Data 5 | - -------------------------------------------------------- - | 0xa8-0xab | 0x80000001 | Config Addr 6 | - | 0xac-0xaf | 0x80000001 | Config Data 6 | - -------------------------------------------------------- - | ...... | - -------------------------------------------------------- - | 0x???????? | u-boot.bin | - -------------------------------------------------------- - - then insert the SDCard to the active slot to boot up. - -For boot from eSPI: -1. Build image - make MPC8536DS_SPIFLASH_config - make CROSS_COMPILE=powerpc-none-linux-gnuspe- all - -2. Change dip-switch - SW2[5-8] = 0110 - -3. Put image to SPI flash - Put the info in the above table onto the SPI flash, then - boot up. diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c deleted file mode 100644 index 8319ae8245..0000000000 --- a/board/freescale/mpc8536ds/ddr.c +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2008 Freescale Semiconductor, Inc. - */ - -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 10; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - - /* - * For wake up arp feature, we need enable auto self refresh - */ - popts->auto_self_refresh_en = 1; - popts->sr_it = 0x6; -} diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c deleted file mode 100644 index d59b12d82c..0000000000 --- a/board/freescale/mpc8536ds/law.c +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c deleted file mode 100644 index 5907a7b428..0000000000 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008-2012 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/sgmii_riser.h" - -int board_early_init_f (void) -{ -#ifdef CONFIG_MMC - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); - - /* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118, - * however, this erratum only applies to MPC8536 Rev1.0. - * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/ - if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) && - (SVR_MIN(get_svr()) >= 0x1)) - || (SVR_MAJ(get_svr() & 0x7) > 0x1)) - setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV); -#endif - return 0; -} - -int checkboard (void) -{ - u8 vboot; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - printf("Board: MPC8536DS Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), - in_8(pixis_base + PIXIS_PVER)); - - vboot = in_8(pixis_base + PIXIS_VBOOT); - switch ((vboot & PIXIS_VBOOT_LBMAP) >> 5) { - case PIXIS_VBOOT_LBMAP_NOR0: - puts ("vBank: 0\n"); - break; - case PIXIS_VBOOT_LBMAP_NOR1: - puts ("vBank: 1\n"); - break; - case PIXIS_VBOOT_LBMAP_NOR2: - puts ("vBank: 2\n"); - break; - case PIXIS_VBOOT_LBMAP_NOR3: - puts ("vBank: 3\n"); - break; - case PIXIS_VBOOT_LBMAP_PJET: - puts ("Promjet\n"); - break; - case PIXIS_VBOOT_LBMAP_NAND: - puts ("NAND\n"); - break; - } - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - struct ccsr_ddr __iomem *ddr = &immap->im_ddr; - uint d_init; - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; - -#if defined (CONFIG_DDR_ECC) - ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; - ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; - ddr->err_sbe = CONFIG_SYS_DDR_SBE; -#endif - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { - udelay(1000); - } - debug("DDR: memory initialized\n\n"); - asm("sync; isync"); - udelay(500); -#endif - - return 512 * 1024 * 1024; -} - -#endif - -#ifdef CONFIG_PCI1 -static struct pci_controller pci1_hose; -#endif - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info; - u32 devdisr, pordevsr; - u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; - int first_free_busno; - - first_free_busno = fsl_pcie_init_board(0); - -#ifdef CONFIG_PCI1 - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - porpllsr = in_be32(&gur->porpllsr); - - pci_speed = 66666000; - pci_32 = 1; - pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; - pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; - - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info, 1); - set_next_law(pci_info.mem_phys, - law_size_bits(pci_info.mem_size), pci_info.law); - set_next_law(pci_info.io_phys, - law_size_bits(pci_info.io_size), pci_info.law); - - pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); - printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", - (pci_32) ? 32 : 64, - (pci_speed == 33333000) ? "33" : - (pci_speed == 66666000) ? "66" : "unknown", - pci_clk_sel ? "sync" : "async", - pci_agent ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter", - pci_info.regs); - - first_free_busno = fsl_pci_init_port(&pci_info, - &pci1_hose, first_free_busno); - } else { - printf("PCI: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ -#endif -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 1; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ - - return 0; -} - -int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_TSEC_ENET - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[2]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - if (is_serdes_configured(SGMII_TSEC1)) { - puts("eTSEC1 is in sgmii mode.\n"); - tsec_info[num].phyaddr = 0; - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode.\n"); - tsec_info[num].phyaddr = 1; - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif - - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } - -#ifdef CONFIG_FSL_SGMII_RISER - if (is_serdes_configured(SGMII_TSEC1) || - is_serdes_configured(SGMII_TSEC3)) { - fsl_sgmii_riser_init(tsec_info, num); - } -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); -#endif - return pci_eth_init(bis); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_fdt_fixup(blob); -#endif - -#ifdef CONFIG_HAS_FSL_MPH_USB - fsl_fdt_fixup_dr_usb(blob, bd); -#endif - - return 0; -} -#endif diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c deleted file mode 100644 index 5df4788e0a..0000000000 --- a/board/freescale/mpc8536ds/tlb.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_1M, 1), - - /* W**G* - Flash/promjet, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 1, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_VIRT, CONFIG_SYS_PCI1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256K, 1), - - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_1M, 1), - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig deleted file mode 100644 index e60890e2d0..0000000000 --- a/configs/MPC8536DS_36BIT_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8536DS=y -CONFIG_PHYS_64BIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_SYS_FSL_DDR2=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig deleted file mode 100644 index 9f653661f4..0000000000 --- a/configs/MPC8536DS_SDCARD_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xf8f40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8536DS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SYS_FSL_DDR2=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig deleted file mode 100644 index 866d719564..0000000000 --- a/configs/MPC8536DS_SPIFLASH_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xf8f40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xF0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8536DS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SYS_FSL_DDR2=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig deleted file mode 100644 index 9366e7a757..0000000000 --- a/configs/MPC8536DS_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8536DS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_SYS_FSL_DDR2=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h deleted file mode 100644 index 340574a985..0000000000 --- a/include/configs/MPC8536DS.h +++ /dev/null @@ -1,642 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc. - */ - -/* - * mpc8536ds board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#include "../board/freescale/common/ics307_clk.h" - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#define CONFIG_PCI1 1 /* Enable PCI controller 1 */ -#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ -#define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() -#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -/* - * Config the L2 Cache as L2 SRAM - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -#if defined(CONFIG_NAND_SPL) -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ -#define CONFIG_SYS_SPD_BUS_NUM 1 - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3935d322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 -#define CONFIG_SYS_DDR_MODE_1 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x06180100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400010 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00010000 - -/* Make sure required options are set */ -#ifndef CONFIG_SPD_EEPROM -#error ("CONFIG_SPD_EEPROM is required") -#endif - -#undef CONFIG_CLOCKS_IN_MHZ - -/* - * Memory map -- xxx -this is wrong, needs updating - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable - * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable - * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_BR1_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ - CONFIG_SYS_FLASH_BASE_PHYS } -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -#define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ -#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ -#ifdef CONFIG_PHYS_64BIT -#define PIXIS_BASE_PHYS 0xfffdf0000ull -#else -#define PIXIS_BASE_PHYS PIXIS_BASE -#endif - -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - -#define PIXIS_ID 0x0 /* Board ID at offset 0 */ -#define PIXIS_VER 0x1 /* Board version at offset 1 */ -#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ -#define PIXIS_CSR 0x3 /* PIXIS General control/status register */ -#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ -#define PIXIS_PWR 0x5 /* PIXIS Power status register */ -#define PIXIS_AUX 0x6 /* Auxiliary 1 register */ -#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ -#define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ -#define PIXIS_VCTL 0x10 /* VELA Control Register */ -#define PIXIS_VSTAT 0x11 /* VELA Status Register */ -#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ -#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ -#define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ -#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ -#define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ -#define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ -#define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ -#define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ -#define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ -#define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ -#define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ -#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ -#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ -#define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ -#define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ -#define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ -#define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ -#define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ -#define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ -#define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ -#define PIXIS_VWATCH 0x24 /* Watchdog Register */ -#define PIXIS_LED 0x25 /* LED Register */ - -#define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ - -/* old pixis referenced names */ -#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ -#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ -#define CONFIG_SYS_PIXIS_VBOOT_MASK 0x4e - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#endif -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ - CONFIG_SYS_NAND_BASE + 0x40000, \ - CONFIG_SYS_NAND_BASE + 0x80000, \ - CONFIG_SYS_NAND_BASE + 0xC0000} -#define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START \ - (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2< PHY1 */ -#define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ - -#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_SPIFLASH) -#elif defined(CONFIG_RAMBOOT_SDCARD) -#define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#endif - -/* - * USB - */ -#define CONFIG_HAS_FSL_MPH_USB -#ifdef CONFIG_HAS_FSL_MPH_USB -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#endif -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_IPADDR 192.168.1.254 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ -"netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ -"consoledev=ttyS0\0" \ -"ramdiskaddr=2000000\0" \ -"ramdiskfile=8536ds/ramdisk.uboot\0" \ -"fdtaddr=1e00000\0" \ -"fdtfile=8536ds/mpc8536ds.dtb\0" \ -"bdev=sda3\0" \ -"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */