diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 1842d71f24..ece589ba90 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1597,7 +1597,6 @@ source "board/freescale/mpc8555cds/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"
-source "board/freescale/p1010rdb/Kconfig"
 source "board/freescale/p1022ds/Kconfig"
 source "board/freescale/p1023rdb/Kconfig"
 source "board/freescale/p1_p2_rdb_pc/Kconfig"
diff --git a/board/freescale/p1010rdb/Kconfig b/board/freescale/p1010rdb/Kconfig
deleted file mode 100644
index 3adac4af1e..0000000000
--- a/board/freescale/p1010rdb/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_P1010RDB_PA || TARGET_P1010RDB_PB
-
-config SYS_BOARD
-	default "p1010rdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P1010RDB"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/p1010rdb/MAINTAINERS b/board/freescale/p1010rdb/MAINTAINERS
deleted file mode 100644
index c9f7fa3e2a..0000000000
--- a/board/freescale/p1010rdb/MAINTAINERS
+++ /dev/null
@@ -1,33 +0,0 @@
-P1010RDB BOARD
-M:	Qiang Zhao <qiang.zhao at nxp.com>
-S:	Maintained
-F:	board/freescale/p1010rdb/
-F:	include/configs/P1010RDB.h
-F:	configs/P1010RDB-PA_36BIT_NAND_defconfig
-F:	configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
-F:	configs/P1010RDB-PA_36BIT_NOR_defconfig
-F:	configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig
-F:	configs/P1010RDB-PA_36BIT_SDCARD_defconfig
-F:	configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
-F:	configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig
-F:	configs/P1010RDB-PA_NAND_defconfig
-F:	configs/P1010RDB-PA_NAND_SECBOOT_defconfig
-F:	configs/P1010RDB-PA_NOR_defconfig
-F:	configs/P1010RDB-PA_NOR_SECBOOT_defconfig
-F:	configs/P1010RDB-PA_SDCARD_defconfig
-F:	configs/P1010RDB-PA_SPIFLASH_defconfig
-F:	configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_36BIT_NAND_defconfig
-F:	configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_36BIT_NOR_defconfig
-F:	configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_36BIT_SDCARD_defconfig
-F:	configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
-F:	configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_NAND_defconfig
-F:	configs/P1010RDB-PB_NAND_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_NOR_defconfig
-F:	configs/P1010RDB-PB_NOR_SECBOOT_defconfig
-F:	configs/P1010RDB-PB_SDCARD_defconfig
-F:	configs/P1010RDB-PB_SPIFLASH_defconfig
-F:	configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig
diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile
deleted file mode 100644
index 36b34c70aa..0000000000
--- a/board/freescale/p1010rdb/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2010-2011 Freescale Semiconductor, Inc.
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-obj-y	+= spl_minimal.o
-else
-ifdef CONFIG_SPL_BUILD
-obj-y	+= spl.o
-endif
-obj-y	+= p1010rdb.o
-obj-y	+= ddr.o
-endif
-
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
deleted file mode 100644
index 105942f7a5..0000000000
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ /dev/null
@@ -1,208 +0,0 @@
-Overview
-=========
-The P1010RDB is a Freescale reference design board that hosts the P1010 SoC.
-
-The P1010 is a cost-effective, low-power, highly integrated host processor
-based on a Power Architecture e500v2 core (maximum core frequency 800/1000 MHz),
-that addresses the requirements of several routing, gateways, storage, consumer,
-and industrial applications. Applications of interest include the main CPUs and
-I/O processors in network attached storage (NAS), the voice over IP (VoIP)
-router/gateway, and wireless LAN (WLAN) and industrial controllers.
-
-The P1010RDB board features are as follows:
-Memory subsystem:
-	- 1Gbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus)
-	- 32 Mbyte NOR flash single-chip memory
-	- 32 Mbyte NAND flash memory
-	- 256 Kbit M24256 I2C EEPROM
-	- 16 Mbyte SPI memory
-	- I2C Board EEPROM 128x8 bit memory
-	- SD/MMC connector to interface with the SD memory card
-Interfaces:
-	- PCIe:
-		- Lane0: x1 mini-PCIe slot
-		- Lane1: x1 PCIe standard slot
-	- SATA:
-		- 1 internal SATA connector to 2.5? 160G SATA2 HDD
-		- 1 eSATA connector to rear panel
-	- 10/100/1000 BaseT Ethernet ports:
-		- eTSEC1, RGMII: one 10/100/1000 port using Vitesse VSC8641XKO
-		- eTSEC2, SGMII: one 10/100/1000 port using Vitesse VSC8221
-		- eTSEC3, SGMII: one 10/100/1000 port using Vitesse VSC8221
-	- USB 2.0 port:
-		- x1 USB2.0 port via an external ULPI PHY to micro-AB connector
-		- x1 USB2.0 port via an internal UTMI PHY to micro-AB connector
-	- FlexCAN ports:
-		- 2 DB-9 female connectors for FlexCAN bus(revision 2.0B)
-		  interface;
-	- DUART interface:
-		- DUART interface: supports two UARTs up to 115200 bps for
-		   console display
-		- RJ45 connectors are used for these 2 UART ports.
-	- TDM
-		- 2 FXS ports connected via an external SLIC to the TDM interface.
-		  SLIC is controllled via SPI.
-		- 1 FXO port connected via a relay to FXS for switchover to POTS
-Board connectors:
-	- Mini-ITX power supply connector
-	- JTAG/COP for debugging
-IEEE Std. 1588 signals for test and measurement
-Real-time clock on I2C bus
-POR
-	- support critical POR setting changed via switch on board
-PCB
-	- 6-layer routing (4-layer signals, 2-layer power and ground)
-
-
-Physical Memory Map on P1010RDB
-===============================
-Address Start   Address End   Memory type	Attributes
-0x0000_0000	0x3fff_ffff   DDR		1G Cacheable
-0xa000_0000	0xdfff_ffff   PCI Express Mem	1G non-cacheable
-0xee00_0000	0xefff_ffff   NOR Flash		32M non-cacheable
-0xffc2_0000	0xffc5_ffff   PCI IO range	256K non-cacheable
-0xffa0_0000	0xffaf_ffff   NAND Flash	1M cacheable
-0xffb0_0000	0xffbf_ffff   Board CPLD	1M non-cacheable
-0xffd0_0000	0xffd0_3fff   L1 for Stack	16K Cacheable TLB0
-0xffe0_0000	0xffef_ffff   CCSR		1M non-cacheable
-
-
-Serial Port Configuration on P1010RDB
-=====================================
-Configure the serial port of the attached computer with the following values:
-	-Data rate: 115200 bps
-	-Number of data bits: 8
-	-Parity: None
-	-Number of Stop bits: 1
-	-Flow Control: Hardware/None
-
-
-Settings of DIP-switch
-======================
-  SW4[1:4]= 1111 and SW6[4]=0 for boot from 16bit NOR flash
-  SW4[1:4]= 1000 and SW6[4]=1 for boot from 8bit NAND flash
-  SW4[1:4]= 0110 and SW6[4]=0 for boot from SPI flash
-Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Setting of hwconfig
-===================
-If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
-setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
-By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
-is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
-instead of to CAN/UART1.
-
-
-Build and burn U-Boot to NOR flash
-==================================
-1. Build u-boot.bin image
-	export ARCH=powerpc
-	export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
-	make P1010RDB_NOR
-
-2. Burn u-boot.bin into NOR flash
-	=> tftp $loadaddr $uboot
-	=> protect off eff40000 +$filesize
-	=> erase eff40000 +$filesize
-	=> cp.b $loadaddr eff40000 $filesize
-
-3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
-
-
-Alternate NOR bank
-==================
-1. Burn u-boot.bin into alternate NOR bank
-	=> tftp $loadaddr $uboot
-	=> protect off eef40000 +$filesize
-	=> erase eef40000 +$filesize
-	=> cp.b $loadaddr eef40000 $filesize
-
-2. Switch to alternate NOR bank
-	=> mw.b ffb00009 1
-	=> reset
-	or set SW1[8]= ON
-
-SW1[8]= OFF: Upper bank used for booting start
-SW1[8]= ON:  Lower bank used for booting start
-CPLD NOR bank selection register address 0xFFB00009 Bit[0]:
-0 - boot from upper 4 sectors
-1 - boot from lower 4 sectors
-
-
-Build and burn U-Boot to NAND flash
-===================================
-1. Build u-boot.bin image
-	export ARCH=powerpc
-	export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
-	make P1010RDB_NAND
-
-2. Burn u-boot-nand.bin into NAND flash
-	=> tftp $loadaddr $uboot-nand
-	=> nand erase 0 $filesize
-	=> nand write $loadaddr 0 $filesize
-
-3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
-
-
-Build and burn U-Boot to SPI flash
-==================================
-1. Build u-boot-spi.bin image
-	make P1010RDB_SPIFLASH_config; make
-	Boot up kernel with rootfs.ext2.gz.uboot.p1010rdb
-	Download u-boot.bin to linux and you can find some config files
-	under /usr/share such as config_xx.dat. Do below command:
-	boot_format config_ddr3_1gb_p1010rdb_800M.dat u-boot.bin -spi \
-			u-boot-spi.bin
-	to generate u-boot-spi.bin.
-
-2. Burn u-boot-spi.bin into SPI flash
-	=> tftp $loadaddr $uboot-spi
-	=> sf erase 0 100000
-	=> sf write $loadaddr 0 $filesize
-
-3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on.
-
-
-CPLD POR setting registers
-==========================
-1. Set POR switch selection register (addr 0xFFB00011) to 0.
-2. Write CPLD POR registers (BCSR0~BCSR3, addr 0xFFB00014~0xFFB00017) with
-   proper values.
-   If change boot ROM location to NOR or NAND flash, need write the IFC_CS0
-   switch command by I2C.
-3. Send reset command.
-   After reset, the new POR setting will be implemented.
-
-Two examples are given in below:
-Switch from NOR to NAND boot with default frequency:
-	=> i2c dev 0
-	=> i2c mw 18 1 f9
-	=> i2c mw 18 3 f0
-	=> mw.b ffb00011 0
-	=> mw.b ffb00017 1
-	=> reset
-Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz):
-	=> i2c dev 0
-	=> i2c mw 18 1 f1
-	=> i2c mw 18 3 f0
-	=> mw.b ffb00011 0
-	=> mw.b ffb00014 2
-	=> mw.b ffb00015 5
-	=> mw.b ffb00016 3
-	=> mw.b ffb00017 f
-	=> reset
-
-
-Boot Linux from network using TFTP on P1010RDB
-==============================================
-Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area.
-	=> tftp 1000000 uImage
-	=> tftp 2000000 p1010rdb.dtb
-	=> tftp 3000000 rootfs.ext2.gz.uboot.p1010rdb
-	=> bootm 1000000 3000000 2000000
-
-
-For more details, please refer to P1010RDB User Guide and access website
-www.freescale.com
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
deleted file mode 100644
index dc82f0df09..0000000000
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ /dev/null
@@ -1,188 +0,0 @@
-Overview
-=========
-The P1010RDB-PB is a Freescale Reference Design Board that hosts the P1010 SoC.
-P1010RDB-PB is a variation of previous P1010RDB-PA board.
-
-The P1010 is a cost-effective, low-power, highly integrated host processor
-based on a Power Architecture e500v2 core (maximum core frequency 1GHz),that
-addresses the requirements of several routing, gateways, storage, consumer,
-and industrial applications. Applications of interest include the main CPUs and
-I/O processors in network attached storage (NAS), the voice over IP (VoIP)
-router/gateway, and wireless LAN (WLAN) and industrial controllers.
-
-The P1010RDB-PB board features are as following:
-Memory subsystem:
-	- 1G bytes unbuffered DDR3 SDRAM discrete devices (32-bit bus)
-	- 32M bytes NOR flash single-chip memory
-	- 2G bytes NAND flash memory
-	- 16M bytes SPI memory
-	- 256K bit M24256 I2C EEPROM
-	- I2C Board EEPROM 128x8 bit memory
-	- SD/MMC connector to interface with the SD memory card
-Interfaces:
-	- Three 10/100/1000 BaseT Ethernet ports (One RGMII and two SGMII)
-	- PCIe 2.0: two x1 mini-PCIe slots
-	- SATA 2.0: two SATA interfaces
-	- USB 2.0: one USB interface
-	- FlexCAN: two FlexCAN interfaces (revision 2.0B)
-	- UART: one USB-to-Serial interface
-	- TDM: 2 FXS ports connected via an external SLIC to the TDM interface.
-	       1 FXO port connected via a relay to FXS for switchover to POTS
-
-Board connectors:
-	- Mini-ITX power supply connector
-	- JTAG/COP for debugging
-
-POR: support critical POR setting changed via switch on board
-PCB: 6-layer routing (4-layer signals, 2-layer power and ground)
-
-Physical Memory Map on P1010RDB
-===============================
-Address Start   Address End   Memory type	Attributes
-0x0000_0000	0x3fff_ffff   DDR		1G Cacheable
-0xa000_0000	0xdfff_ffff   PCI Express Mem	1G non-cacheable
-0xee00_0000	0xefff_ffff   NOR Flash		32M non-cacheable
-0xffc2_0000	0xffc5_ffff   PCI IO range	256K non-cacheable
-0xffa0_0000	0xffaf_ffff   NAND Flash	1M cacheable
-0xffb0_0000	0xffbf_ffff   Board CPLD	1M non-cacheable
-0xffd0_0000	0xffd0_3fff   L1 for Stack	16K Cacheable TLB0
-0xffe0_0000	0xffef_ffff   CCSR		1M non-cacheable
-
-
-Serial Port Configuration on P1010RDB
-=====================================
-Configure the serial port of the attached computer with the following values:
-	-Data rate: 115200 bps
-	-Number of data bits: 8
-	-Parity: None
-	-Number of Stop bits: 1
-	-Flow Control: Hardware/None
-
-
-P1010RDB-PB default DIP-switch settings
-=======================================
-SW1[1:8]= 10101010
-SW2[1:8]= 11011000
-SW3[1:8]= 10010000
-SW4[1:4]= 1010
-SW5[1:8]= 11111010
-
-
-P1010RDB-PB boot mode settings via DIP-switch
-=============================================
-SW4[1:4]= 1111 and SW3[3:4]= 00 for 16bit NOR boot
-SW4[1:4]= 1010 and SW3[3:4]= 01 for 8bit NAND boot
-SW4[1:4]= 0110 and SW3[3:4]= 00 for SPI boot
-SW4[1:4]= 0111 and SW3[3:4]= 10 for SD boot
-Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Switch P1010RDB-PB boot mode via software without setting DIP-switch
-====================================================================
-=> run boot_bank0    (boot from NOR bank0)
-=> run boot_bank1    (boot from NOR bank1)
-=> run boot_nand     (boot from NAND flash)
-=> run boot_spi      (boot from SPI flash)
-=> run boot_sd       (boot from SD card)
-
-
-Frequency combination support on P1010RDB-PB
-=============================================
-SW1[4:7] SW5[1] SW5[5:8] SW2[2] Core(MHz) Platform(MHz) DDR(MT/s)
-0101      1      1010     0       800       400		800
-1001      1      1010     0       800       400		667
-1010      1      1100     0       667       333		667
-1000      0      1010     0       533       266		667
-0101      1      1010     1       1000      400		800
-1001      1      1010     1       1000      400		667
-
-
-Setting of pin mux
-==================
-Since pins multiplexing, TDM and CAN are muxed with SPI flash.
-SDHC is muxed with IFC. IFC and SPI flash are enabled by default.
-
-To enable TDM:
-=> setenv hwconfig fsl_p1010mux:tdm_can=tdm
-=> save;reset
-
-To enable FlexCAN:
-=> setenv hwconfig fsl_p1010mux:tdm_can=can
-=> save;reset
-
-To enable SDHC in case of NOR/NAND/SPI boot
-   a) For temporary use case in runtime without reboot system
-      run 'mux sdhc' in U-Boot to validate SDHC with invalidating IFC.
-
-   b) For long-term use case
-      set 'esdhc' in hwconfig and save it.
-
-To enable IFC in case of SD boot
-   a) For temporary use case in runtime without reboot system
-      run 'mux ifc' in U-Boot to validate IFC with invalidating SDHC.
-
-   b) For long-term use case
-      set 'ifc' in hwconfig and save it.
-
-
-Build images for different boot mode
-====================================
-First setup cross compile environment on build host
-   $ export ARCH=powerpc
-   $ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu-
-
-1. For NOR boot
-   $ make P1010RDB-PB_NOR
-
-2. For NAND boot
-   $ make P1010RDB-PB_NAND
-
-3. For SPI boot
-   $ make P1010RDB-PB_SPIFLASH
-
-4. For SD boot
-   $ make P1010RDB-PB_SDCARD
-
-
-Steps to program images to flash for different boot mode
-========================================================
-1. NOR boot
-   => tftp 1000000 u-boot.bin
-   For bank0
-   => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
-   set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
-
-   For bank1
-   => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize
-   set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
-
-2. NAND boot
-   => tftp 1000000 u-boot-nand.bin
-   => nand erase 0 $filesize; nand write $loadaddr 0 $filesize
-   Set SW4[1:4]= 1010 and SW3[3:4]= 01, then power on the board
-
-3. SPI boot
-   1)  cat p1010rdb-config-header.bin u-boot.bin > u-boot-spi-combined.bin
-   2)  =>  tftp 1000000 u-boot-spi-combined.bin
-   3)  =>  sf probe 0; sf erase 0 100000; sf write 1000000 0 100000
-   set SW4[1:4]= 0110 and SW3[3:4]= 00, then power on the board
-
-4. SD boot
-   1)	cat p1010rdb-config-header.bin u-boot.bin > u-boot-sd-combined.bin
-   2)	=> tftp 1000000 u-boot-sd-combined.bin
-   3)	=> mux sdhc
-   4)	=> mmc write 1000000 0 1050
-   set SW4[1:4]= 0111 and SW3[3:4]= 10, then power on the board
-
-
-Boot Linux from network using TFTP on P1010RDB-PB
-=================================================
-Place uImage, p1010rdb.dtb and rootfs files in the TFTP download path.
-	=> tftp 1000000 uImage
-	=> tftp 2000000 p1010rdb.dtb
-	=> tftp 3000000 rootfs.ext2.gz.uboot.p1010rdb
-	=> bootm 1000000 3000000 2000000
-
-
-For more details, please refer to P1010RDB-PB User Guide and access website
-www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
deleted file mode 100644
index 71f6259b60..0000000000
--- a/board/freescale/p1010rdb/ddr.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <vsprintf.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_SYS_DRAM_SIZE	1024
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_667,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
-	{750, 850, &ddr_cfg_regs_800},
-	{607, 749, &ddr_cfg_regs_667},
-	{0, 0, NULL}
-};
-
-unsigned long get_sdram_size(void)
-{
-	struct cpu_type *cpu;
-	phys_size_t ddr_size;
-
-	cpu = gd->arch.cpu;
-	/* P1014 and it's derivatives support max 16it DDR width */
-	if (cpu->soc_ver == SVR_P1014)
-		ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
-	else
-		ddr_size = CONFIG_SYS_DRAM_SIZE;
-
-	return ddr_size;
-}
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-phys_size_t fixed_sdram(void)
-{
-	int i;
-	char buf[32];
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	phys_size_t ddr_size;
-	ulong ddr_freq, ddr_freq_mhz;
-	struct cpu_type *cpu;
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-#endif
-
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %s MT/s data rate\n",
-				strmhz(buf, ddr_freq));
-
-	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
-		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
-		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
-			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
-							sizeof(ddr_cfg_regs));
-			break;
-		}
-	}
-
-	if (fixed_ddr_parm_0[i].max_freq == 0)
-		panic("Unsupported DDR data rate %s MT/s data rate\n",
-					strmhz(buf, ddr_freq));
-
-	cpu = gd->arch.cpu;
-	/* P1014 and it's derivatives support max 16bit DDR width */
-	if (cpu->soc_ver == SVR_P1014) {
-		ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
-		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
-		/* divide SA and EA by two and then mask the rest so we don't
-		 * write to reserved fields */
-		ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff;
-	}
-
-	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
-					LAW_TRGT_IF_DDR_1) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	}
-
-	return ddr_size;
-}
-
-#else /* CONFIG_SYS_DDR_RAW_TIMING */
-/*
- * Samsung K4B2G0846C-HCF8
- * The following timing are for "downshift"
- * i.e. to use CL9 part as CL7
- * otherwise, tAA, tRCD, tRP will be 13500ps
- * and tRC will be 49500ps
- */
-dimm_params_t ddr_raw_timing = {
-	.n_ranks = 1,
-	.rank_density = 1073741824u,
-	.capacity = 1073741824u,
-	.primary_sdram_width = 32,
-	.ec_sdram_width = 0,
-	.registered_dimm = 0,
-	.mirrored_dimm = 0,
-	.n_row_addr = 15,
-	.n_col_addr = 10,
-	.n_banks_per_sdram_device = 8,
-	.edc_config = 0,
-	.burst_lengths_bitmask = 0x0c,
-
-	.tckmin_x_ps = 1875,
-	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
-	.taa_ps = 13125,
-	.twr_ps = 15000,
-	.trcd_ps = 13125,
-	.trrd_ps = 7500,
-	.trp_ps = 13125,
-	.tras_ps = 37500,
-	.trc_ps = 50625,
-	.trfc_ps = 160000,
-	.twtr_ps = 7500,
-	.trtp_ps = 7500,
-	.refresh_rate_ps = 7800000,
-	.tfaw_ps = 37500,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
-		unsigned int controller_number,
-		unsigned int dimm_number)
-{
-	const char dimm_model[] = "Fixed DDR on board";
-
-	if ((controller_number == 0) && (dimm_number == 0)) {
-		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
-		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
-		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
-	}
-
-	return 0;
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	struct cpu_type *cpu;
-	int i;
-	popts->clk_adjust = 6;
-	popts->cpo_override = 0x1f;
-	popts->write_data_delay = 2;
-	popts->half_strength_driver_enable = 1;
-	/* Write leveling override */
-	popts->wrlvl_en = 1;
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-	popts->wrlvl_start = 0x8;
-	popts->trwt_override = 1;
-	popts->trwt = 0;
-
-	cpu = gd->arch.cpu;
-	/* P1014 and it's derivatives support max 16it DDR width */
-	if (cpu->soc_ver == SVR_P1014)
-		popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
-		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
-	}
-}
-
-#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c
deleted file mode 100644
index debf571482..0000000000
--- a/board/freescale/p1010rdb/law.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC),
-	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
deleted file mode 100644
index 66ccc0bd1e..0000000000
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ /dev/null
@@ -1,731 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/io.h>
-#include <env.h>
-#include <miiphy.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <mmc.h>
-#include <netdev.h>
-#include <pci.h>
-#include <asm/fsl_serdes.h>
-#include <fsl_ifc.h>
-#include <asm/fsl_pci.h>
-#include <hwconfig.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GPIO4_PCIE_RESET_SET		0x08000000
-#define MUX_CPLD_CAN_UART		0x00
-#define MUX_CPLD_TDM			0x01
-#define MUX_CPLD_SPICS0_FLASH		0x00
-#define MUX_CPLD_SPICS0_SLIC		0x02
-#define PMUXCR1_IFC_MASK       0x00ffff00
-#define PMUXCR1_SDHC_MASK      0x00fff000
-#define PMUXCR1_SDHC_ENABLE    0x00555000
-
-enum {
-	MUX_TYPE_IFC,
-	MUX_TYPE_SDHC,
-	MUX_TYPE_SPIFLASH,
-	MUX_TYPE_TDM,
-	MUX_TYPE_CAN,
-	MUX_TYPE_CS0_NOR,
-	MUX_TYPE_CS0_NAND,
-};
-
-enum {
-	I2C_READ_BANK,
-	I2C_READ_PCB_VER,
-};
-
-static uint sd_ifc_mux;
-
-struct cpld_data {
-	u8 cpld_ver; /* cpld revision */
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-	u8 pcba_ver; /* pcb revision number */
-	u8 twindie_ddr3;
-	u8 res1[6];
-	u8 bank_sel; /* NOR Flash bank */
-	u8 res2[5];
-	u8 usb2_sel;
-	u8 res3[1];
-	u8 porsw_sel;
-	u8 tdm_can_sel;
-	u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
-	u8 por0; /* POR Options */
-	u8 por1; /* POR Options */
-	u8 por2; /* POR Options */
-	u8 por3; /* POR Options */
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-	u8 rom_loc;
-#endif
-};
-
-int board_early_init_f(void)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-	/* Clock configuration to access CPLD using IFC(GPCM) */
-	setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-	/*
-	* Reset PCIe slots via GPIO4
-	*/
-	setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
-	setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_16M, 1);
-
-	set_tlb(1, flashbase + 0x1000000,
-			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
-	return 0;
-}
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* ifdef CONFIG_PCI */
-
-int config_board_mux(int ctrl_type)
-{
-	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u8 tmp;
-
-#ifdef CONFIG_DM_I2C
-	struct udevice *dev;
-	int ret;
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
-				      I2C_PCA9557_ADDR1, 1, &dev);
-	if (ret) {
-		printf("%s: Cannot find udev for a bus %d\n",
-		       __func__, I2C_PCA9557_BUS_NUM);
-		return ret;
-	}
-	switch (ctrl_type) {
-	case MUX_TYPE_IFC:
-		tmp = 0xf0;
-		dm_i2c_write(dev, 3, &tmp, 1);
-		tmp = 0x01;
-		dm_i2c_write(dev, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_IFC;
-		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
-		break;
-	case MUX_TYPE_SDHC:
-		tmp = 0xf0;
-		dm_i2c_write(dev, 3, &tmp, 1);
-		tmp = 0x05;
-		dm_i2c_write(dev, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_SDHC;
-		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
-				PMUXCR1_SDHC_ENABLE);
-		break;
-	case MUX_TYPE_SPIFLASH:
-		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
-		break;
-	case MUX_TYPE_TDM:
-		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
-		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
-		break;
-	case MUX_TYPE_CAN:
-		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
-		break;
-	default:
-		break;
-	}
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-	ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
-				      I2C_PCA9557_ADDR2, 1, &dev);
-	if (ret) {
-		printf("%s: Cannot find udev for a bus %d\n",
-		       __func__, I2C_PCA9557_BUS_NUM);
-		return ret;
-	}
-	switch (ctrl_type) {
-	case MUX_TYPE_IFC:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_IFC;
-		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
-		break;
-	case MUX_TYPE_SDHC:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		setbits_8(&tmp, 0x04);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_SDHC;
-		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
-				PMUXCR1_SDHC_ENABLE);
-		break;
-	case MUX_TYPE_SPIFLASH:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		clrbits_8(&tmp, 0x80);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x80);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		break;
-	case MUX_TYPE_TDM:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		setbits_8(&tmp, 0x82);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x82);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		break;
-	case MUX_TYPE_CAN:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		clrbits_8(&tmp, 0x02);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x02);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		break;
-	case MUX_TYPE_CS0_NOR:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		break;
-	case MUX_TYPE_CS0_NAND:
-		dm_i2c_read(dev, 0, &tmp, 1);
-		setbits_8(&tmp, 0x08);
-		dm_i2c_write(dev, 1, &tmp, 1);
-		dm_i2c_read(dev, 3, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		dm_i2c_write(dev, 3, &tmp, 1);
-		break;
-	default:
-		break;
-	}
-#endif
-#else
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	switch (ctrl_type) {
-	case MUX_TYPE_IFC:
-		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
-		tmp = 0xf0;
-		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
-		tmp = 0x01;
-		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_IFC;
-		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
-		break;
-	case MUX_TYPE_SDHC:
-		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
-		tmp = 0xf0;
-		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
-		tmp = 0x05;
-		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_SDHC;
-		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
-				PMUXCR1_SDHC_ENABLE);
-		break;
-	case MUX_TYPE_SPIFLASH:
-		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
-		break;
-	case MUX_TYPE_TDM:
-		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
-		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
-		break;
-	case MUX_TYPE_CAN:
-		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
-		break;
-	default:
-		break;
-	}
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-	uint orig_bus = i2c_get_bus_num();
-	i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
-
-	switch (ctrl_type) {
-	case MUX_TYPE_IFC:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_IFC;
-		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
-		break;
-	case MUX_TYPE_SDHC:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		setbits_8(&tmp, 0x04);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x04);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		sd_ifc_mux = MUX_TYPE_SDHC;
-		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
-				PMUXCR1_SDHC_ENABLE);
-		break;
-	case MUX_TYPE_SPIFLASH:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x80);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x80);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		break;
-	case MUX_TYPE_TDM:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		setbits_8(&tmp, 0x82);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x82);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		break;
-	case MUX_TYPE_CAN:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x02);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x02);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		break;
-	case MUX_TYPE_CS0_NOR:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		break;
-	case MUX_TYPE_CS0_NAND:
-		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
-		setbits_8(&tmp, 0x08);
-		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
-		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		clrbits_8(&tmp, 0x08);
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
-		break;
-	default:
-		break;
-	}
-	i2c_set_bus_num(orig_bus);
-#endif
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_TARGET_P1010RDB_PB
-int i2c_pca9557_read(int type)
-{
-	u8 val;
-	int bus_num = I2C_PCA9557_BUS_NUM;
-
-#ifdef CONFIG_DM_I2C
-	struct udevice *dev;
-	int ret;
-
-	ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA9557_ADDR2, 1, &dev);
-	if (ret) {
-		printf("%s: Cannot find udev for a bus %d\n",
-		       __func__, bus_num);
-		return ret;
-	}
-	dm_i2c_read(dev, 0, &val, 1);
-#else
-	i2c_set_bus_num(bus_num);
-	i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
-#endif
-
-	switch (type) {
-	case I2C_READ_BANK:
-		val = (val & 0x10) >> 4;
-		break;
-	case I2C_READ_PCB_VER:
-		val = ((val & 0x60) >> 5) + 1;
-		break;
-	default:
-		break;
-	}
-
-	return val;
-}
-#endif
-
-int checkboard(void)
-{
-	struct cpu_type *cpu;
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-	u8 val;
-
-	cpu = gd->arch.cpu;
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-	printf("Board: %sRDB-PA, ", cpu->name);
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-	printf("Board: %sRDB-PB, ", cpu->name);
-#ifdef CONFIG_DM_I2C
-	struct udevice *dev;
-	int ret;
-
-	ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM, I2C_PCA9557_ADDR2,
-				      1, &dev);
-	if (ret) {
-		printf("%s: Cannot find udev for a bus %d\n", __func__,
-		       I2C_PCA9557_BUS_NUM);
-		return ret;
-	}
-	val = 0x0;  /* no polarity inversion */
-	dm_i2c_write(dev, 2, &val, 1);
-#else
-	i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
-	i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
-	val = 0x0;  /* no polarity inversion */
-	i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
-#endif
-#endif
-
-#ifdef CONFIG_SDCARD
-	/* switch to IFC to read info from CPLD */
-	config_board_mux(MUX_TYPE_IFC);
-#endif
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-	val = (in_8(&cpld_data->pcba_ver) & 0xf);
-	printf("PCB: v%x.0\n", val);
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-	val = in_8(&cpld_data->cpld_ver);
-	printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
-	printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
-	val = in_8(&cpld_data->rom_loc) & 0xf;
-	puts("Boot from: ");
-	switch (val) {
-	case 0xf:
-		config_board_mux(MUX_TYPE_CS0_NOR);
-		printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
-		break;
-	case 0xe:
-		puts("SDHC\n");
-		val = 0x60; /* set pca9557 pin input/output */
-#ifdef CONFIG_DM_I2C
-		dm_i2c_write(dev, 3, &val, 1);
-#else
-		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
-#endif
-		break;
-	case 0x5:
-		config_board_mux(MUX_TYPE_IFC);
-		config_board_mux(MUX_TYPE_CS0_NAND);
-		puts("NAND\n");
-		break;
-	case 0x6:
-		config_board_mux(MUX_TYPE_IFC);
-		puts("SPI\n");
-		break;
-	default:
-		puts("unknown\n");
-		break;
-	}
-#endif
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	struct cpu_type *cpu;
-	int num = 0;
-
-	cpu = gd->arch.cpu;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	/* P1014 and it's derivatives do not support eTSEC3 */
-	if (cpu->soc_ver != SVR_P1014) {
-		SET_STD_TSEC_INFO(tsec_info[num], 3);
-		num++;
-	}
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-#endif
-
-	return pci_eth_init(bis);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void fdt_del_flexcan(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-				"fsl,p1010-flexcan")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_del_spi_flash(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-				"spansion,s25sl12801")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_del_spi_slic(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-				"zarlink,le88266")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_del_tdm(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-				"fsl,starlite-tdm")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_del_sdhc(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-			"fsl,esdhc")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_del_ifc(void *blob)
-{
-	int nodeoff = 0;
-
-	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
-				"fsl,ifc")) >= 0) {
-		fdt_del_node(blob, nodeoff);
-	}
-}
-
-void fdt_disable_uart1(void *blob)
-{
-	int nodeoff;
-
-	nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
-					CONFIG_SYS_NS16550_COM2);
-
-	if (nodeoff > 0) {
-		fdt_status_disabled(blob, nodeoff);
-	} else {
-		printf("WARNING unable to set status for fsl,ns16550 "
-			"uart1: %s\n", fdt_strerror(nodeoff));
-	}
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-	struct cpu_type *cpu;
-
-	cpu = gd->arch.cpu;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-	FT_FSL_PCI_SETUP;
-#endif
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-	fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-       /* P1014 and it's derivatives don't support CAN and eTSEC3 */
-	if (cpu->soc_ver == SVR_P1014) {
-		fdt_del_flexcan(blob);
-		fdt_del_node_and_alias(blob, "ethernet2");
-	}
-
-	/* Delete IFC node as IFC pins are multiplexing with SDHC */
-	if (sd_ifc_mux != MUX_TYPE_IFC)
-		fdt_del_ifc(blob);
-	else
-		fdt_del_sdhc(blob);
-
-	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
-		fdt_del_tdm(blob);
-		fdt_del_spi_slic(blob);
-	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
-		fdt_del_flexcan(blob);
-		fdt_del_spi_flash(blob);
-		fdt_disable_uart1(blob);
-	} else {
-		/*
-		 * If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
-		 * explicitly, defaultly spi_cs_sel to spi-flash instead of
-		 * to tdm/slic.
-		 */
-		fdt_del_tdm(blob);
-		fdt_del_flexcan(blob);
-		fdt_disable_uart1(blob);
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SDCARD
-int board_mmc_init(bd_t *bis)
-{
-	config_board_mux(MUX_TYPE_SDHC);
-		return -1;
-}
-#else
-void board_reset(void)
-{
-	/* mux to IFC to enable CPLD for reset */
-	if (sd_ifc_mux != MUX_TYPE_IFC)
-		config_board_mux(MUX_TYPE_IFC);
-}
-#endif
-
-
-int misc_init_r(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
-		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
-				MPC85xx_PMUXCR_CAN1_UART |
-				MPC85xx_PMUXCR_CAN2_TDM |
-				MPC85xx_PMUXCR_CAN2_UART);
-		config_board_mux(MUX_TYPE_CAN);
-	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
-		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
-				MPC85xx_PMUXCR_CAN1_UART);
-		setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
-				MPC85xx_PMUXCR_CAN1_TDM);
-		clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
-		setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
-		config_board_mux(MUX_TYPE_TDM);
-	} else {
-		/* defaultly spi_cs_sel to flash */
-		config_board_mux(MUX_TYPE_SPIFLASH);
-	}
-
-	if (hwconfig("esdhc"))
-		config_board_mux(MUX_TYPE_SDHC);
-	else if (hwconfig("ifc"))
-		config_board_mux(MUX_TYPE_IFC);
-
-#ifdef CONFIG_TARGET_P1010RDB_PB
-	setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
-#endif
-	return 0;
-}
-
-#ifndef CONFIG_SPL_BUILD
-static int pin_mux_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
-		       char *const argv[])
-{
-	if (argc < 2)
-		return CMD_RET_USAGE;
-	if (strcmp(argv[1], "ifc") == 0)
-		config_board_mux(MUX_TYPE_IFC);
-	else if (strcmp(argv[1], "sdhc") == 0)
-		config_board_mux(MUX_TYPE_SDHC);
-	else
-		return CMD_RET_USAGE;
-	return 0;
-}
-
-U_BOOT_CMD(
-	mux, 2, 0, pin_mux_cmd,
-	"configure multiplexing pin for IFC/SDHC bus in runtime",
-	"bus_type (e.g. mux sdhc)"
-);
-#endif
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c
deleted file mode 100644
index 159d14b024..0000000000
--- a/board/freescale/p1010rdb/spl.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env.h>
-#include <env_internal.h>
-#include <init.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-#include "../common/spl.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-
-	console_init_f();
-
-	/* Clock configuration to access CPLD using IFC(GPCM) */
-	setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-
-#ifdef CONFIG_TARGET_P1010RDB_PB
-	setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	puts("\nSPI Flash boot...\n");
-#endif
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	*/
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	bd_t *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-	arch_cpu_init();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-#ifndef CONFIG_SPL_NAND_BOOT
-	env_init();
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)SPL_ENV_ADDR);
-			    gd->env_addr  = (ulong)(SPL_ENV_ADDR);
-	gd->env_valid = ENV_VALID;
-#else
-	env_relocate();
-#endif
-
-	i2c_init_all();
-
-	dram_init();
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("\nTertiary program loader running in sram...");
-#else
-	puts("\nSecond program loader running in sram...");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	fsl_spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}
diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c
deleted file mode 100644
index 0bb2c83872..0000000000
--- a/board/freescale/p1010rdb/spl_minimal.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-#include <common.h>
-#include <init.h>
-#include <mpc85xx.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_law.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-			gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot... ");
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	puts("\nSecond program loader running in sram...");
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
deleted file mode 100644
index 04faefe994..0000000000
--- a/board/freescale/p1010rdb/tlb.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_BOOT
-	SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_4K, 1),
-#endif
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 2, BOOKE_PAGESZ_16M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000,
-			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 3, BOOKE_PAGESZ_16M, 1),
-
-#ifdef CONFIG_PCI
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_256K, 1),
-#endif
-#endif
-
-	/* *I*G - Board CPLD  */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_256K, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 7, BOOKE_PAGESZ_1M, 1),
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-			0, 8, BOOKE_PAGESZ_1G, 1),
-#endif
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
-		      0, 11, BOOKE_PAGESZ_256K, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
deleted file mode 100644
index c1044520d7..0000000000
--- a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig
deleted file mode 100644
index da04cab014..0000000000
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig
deleted file mode 100644
index 723f6ca2bb..0000000000
--- a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig
deleted file mode 100644
index e6edd395e7..0000000000
--- a/configs/P1010RDB-PA_36BIT_NOR_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
deleted file mode 100644
index dcd606b0c2..0000000000
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig
deleted file mode 100644
index 9987cde995..0000000000
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
deleted file mode 100644
index c0800c8d7d..0000000000
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig
deleted file mode 100644
index 9691fd2bd4..0000000000
--- a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
deleted file mode 100644
index 29ba692ca1..0000000000
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig
deleted file mode 100644
index 49351264cb..0000000000
--- a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
deleted file mode 100644
index d8f87b5dac..0000000000
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig
deleted file mode 100644
index 9711082529..0000000000
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig
deleted file mode 100644
index b31bdff00d..0000000000
--- a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig
deleted file mode 100644
index de2ac2235f..0000000000
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig
deleted file mode 100644
index 66bdebbf99..0000000000
--- a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig
deleted file mode 100644
index 9f4876dd13..0000000000
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig
deleted file mode 100644
index f2e40668ea..0000000000
--- a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig
deleted file mode 100644
index e85af32e2c..0000000000
--- a/configs/P1010RDB-PB_36BIT_NOR_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
deleted file mode 100644
index 45feab4ee4..0000000000
--- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig
deleted file mode 100644
index 50b5c5f1c5..0000000000
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
deleted file mode 100644
index 3cd94f84ea..0000000000
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig
deleted file mode 100644
index 17708dee47..0000000000
--- a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
deleted file mode 100644
index ddfe7b43a1..0000000000
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig
deleted file mode 100644
index be455a0c8f..0000000000
--- a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig
deleted file mode 100644
index 6011f8a9d8..0000000000
--- a/configs/P1010RDB-PB_NOR_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig
deleted file mode 100644
index 65f86fff60..0000000000
--- a/configs/P1010RDB-PB_SDCARD_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig
deleted file mode 100644
index ce3d7c4d6b..0000000000
--- a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig
deleted file mode 100644
index f71ee19ba6..0000000000
--- a/configs/P1010RDB-PB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1010RDB_PB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
deleted file mode 100644
index 8f709a6cac..0000000000
--- a/include/configs/P1010RDB.h
+++ /dev/null
@@ -1,766 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-/*
- * P010 RDB board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#include <asm/config_mpc85xx.h>
-#define CONFIG_NAND_FSL_IFC
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO		0x18000
-#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
-#define CONFIG_SYS_MMC_U_BOOT_SIZE	(512 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_COMMON_INIT_DDR
-#endif
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#else
-#define CONFIG_SPL_SPI_FLASH_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO			0x18000
-#define CONFIG_SPL_MAX_SIZE			(96 * 1024)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(512 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_COMMON_INIT_DDR
-#endif
-#endif
-#endif
-
-#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-
-#define CONFIG_SPL_MAX_SIZE		8192
-#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
-#define CONFIG_SPL_RELOC_STACK		0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
-#else
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SPL_MAX_SIZE		(128 << 10)
-#define CONFIG_TPL_TEXT_BASE		0xD0001000
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(576 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_NAND_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_MAX_SIZE		8192
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0xD0000000
-#define CONFIG_SYS_NAND_U_BOOT_START	0xD0000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
-#endif
-#define CONFIG_SPL_PAD_TO	0x20000
-#define CONFIG_TPL_PAD_TO	0x20000
-#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
-#endif
-#endif
-
-#ifdef CONFIG_NAND_SECBOOT	/* NAND Boot */
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#endif
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_TPL_TEXT_BASE
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
-
-#if defined(CONFIG_PCI)
-#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2			/* PCIE controller 2 (slot 2) */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-/*
- * PCI Windows
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-/* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
-#endif
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
-#endif
-
-/* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
-#else
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
-#endif
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
-#else
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
-#endif
-
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCIE1_NAME		"mini PCIe Slot"
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_SYS_PCIE2_NAME		"PCIe Slot"
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_SYS_PCIE2_NAME		"mini PCIe Slot"
-#endif
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
-#else
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_DDR_CLK_FREQ	66666666 /* DDRCLK on P1010 RDB */
-#define CONFIG_SYS_CLK_FREQ	66666666 /* SYSCLK for P1010 RDB */
-
-#define CONFIG_HWCONFIG
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch predition */
-
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP			1
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-#endif
-
-/* DDR Setup */
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
-#define CONFIG_SYS_SPD_BUS_NUM		1
-#define SPD_EEPROM_ADDRESS		0x52
-
-#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
-
-#ifndef __ASSEMBLY__
-extern unsigned long get_sdram_size(void);
-#endif
-#define CONFIG_SYS_SDRAM_SIZE		get_sdram_size() /* DDR size */
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-
-/* DDR3 Controller Settings */
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0xc70c0008      /* Type = DDR3  */
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00000001
-#define CONFIG_SYS_DDR_TIMING_5		0x03402400
-
-#define CONFIG_SYS_DDR_TIMING_3_800	0x00030000
-#define CONFIG_SYS_DDR_TIMING_0_800	0x00110104
-#define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b8644
-#define CONFIG_SYS_DDR_TIMING_2_800	0x0FA888CF
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x03000000
-#define CONFIG_SYS_DDR_MODE_1_800	0x00441420
-#define CONFIG_SYS_DDR_MODE_2_800	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800	0x0C300100
-#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
-
-/* settings for DDR3 at 667MT/s */
-#define CONFIG_SYS_DDR_TIMING_3_667		0x00010000
-#define CONFIG_SYS_DDR_TIMING_0_667		0x00110004
-#define CONFIG_SYS_DDR_TIMING_1_667		0x5d59e544
-#define CONFIG_SYS_DDR_TIMING_2_667		0x0FA890CD
-#define CONFIG_SYS_DDR_CLK_CTRL_667		0x03000000
-#define CONFIG_SYS_DDR_MODE_1_667		0x00441210
-#define CONFIG_SYS_DDR_MODE_2_667		0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_667		0x0a280000
-#define CONFIG_SYS_DDR_WRLVL_CONTROL_667	0x8675F608
-
-#define CONFIG_SYS_CCSRBAR			0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW		CONFIG_SYS_CCSRBAR
-
-/* Don't relocate CCSRBAR while in NAND_SPL */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/*
- * Memory map
- *
- * 0x0000_0000	0x3fff_ffff	DDR			1G cacheable
- * 0x8000_0000  0xbfff_ffff	PCI Express Mem		1.5G non-cacheable
- * 0xffc0_0000  0xffc3_ffff	PCI IO range		256k non-cacheable
- *
- * Localbus non-cacheable
- * 0xff80_0000	0xff8f_ffff	NAND Flash		1M non-cacheable
- * 0xffb0_0000	0xffbf_ffff	Board CPLD		1M non-cacheable
- * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
- * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
- */
-
-/*
- * IFC Definitions
- */
-/* NOR Flash on IFC */
-
-#define CONFIG_SYS_FLASH_BASE		0xee000000
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* 32M */
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-#endif
-
-#define CONFIG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
-				CSPR_PORT_SIZE_16 | \
-				CSPR_MSEL_NOR | \
-				CSPR_V)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(32*1024*1024)
-#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(7)
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_FTIM0	FTIM0_NOR_TACSE(0x4) | \
-				FTIM0_NOR_TEADC(0x5) | \
-				FTIM0_NOR_TEAHC(0x5)
-#define CONFIG_SYS_NOR_FTIM1	FTIM1_NOR_TACO(0x1e) | \
-				FTIM1_NOR_TRAD_NOR(0x0f)
-#define CONFIG_SYS_NOR_FTIM2	FTIM2_NOR_TCS(0x4) | \
-				FTIM2_NOR_TCH(0x4) | \
-				FTIM2_NOR_TWP(0x1c)
-#define CONFIG_SYS_NOR_FTIM3	0x0
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-/* CFI for NOR Flash */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* NAND Flash on IFC */
-#define CONFIG_SYS_NAND_BASE		0xff800000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
-#else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
-#endif
-
-#define CONFIG_MTD_PARTITION
-
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8	\
-				| CSPR_MSEL_NAND	\
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
-				| CSOR_NAND_RAL_2	/* RAL = 2 Bytes */ \
-				| CSOR_NAND_PGS_512	/* Page Size = 512b */ \
-				| CSOR_NAND_SPRZ_16	/* Spare size = 16 */ \
-				| CSOR_NAND_PB(32))	/* 32 Pages Per Block */
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
-
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
-				| CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
-				| CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
-				| CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
-				| CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
-#endif
-
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-/* NAND Flash Timing Params */
-#define CONFIG_SYS_NAND_FTIM0		FTIM0_NAND_TCCST(0x01) | \
-					FTIM0_NAND_TWP(0x0C)   | \
-					FTIM0_NAND_TWCHT(0x04) | \
-					FTIM0_NAND_TWH(0x05)
-#define CONFIG_SYS_NAND_FTIM1		FTIM1_NAND_TADLE(0x1d) | \
-					FTIM1_NAND_TWBE(0x1d)  | \
-					FTIM1_NAND_TRR(0x07)   | \
-					FTIM1_NAND_TRP(0x0c)
-#define CONFIG_SYS_NAND_FTIM2		FTIM2_NAND_TRAD(0x0c) | \
-					FTIM2_NAND_TREH(0x05) | \
-					FTIM2_NAND_TWHRE(0x0f)
-#define CONFIG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x04)
-
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
-					FTIM0_NAND_TWP(0x18)   | \
-					FTIM0_NAND_TWCHT(0x07) | \
-					FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
-					FTIM1_NAND_TWBE(0x39)  | \
-					FTIM1_NAND_TRR(0x0e)   | \
-					FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
-					FTIM2_NAND_TREH(0x0a)  | \
-					FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3	0x0
-#endif
-
-#define CONFIG_SYS_NAND_DDR_LAW		11
-
-/* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-#endif
-
-/* CPLD on IFC */
-#define CONFIG_SYS_CPLD_BASE		0xffb00000
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CPLD_BASE_PHYS	0xfffb00000ull
-#else
-#define CONFIG_SYS_CPLD_BASE_PHYS	CONFIG_SYS_CPLD_BASE
-#endif
-
-#define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 \
-				| CSPR_MSEL_GPCM \
-				| CSPR_V)
-#define CONFIG_SYS_AMASK3		IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR3		0x0
-/* CPLD Timing parameters for IFC CS3 */
-#define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
-					FTIM0_GPCM_TEADC(0x0e) | \
-					FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
-					FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x8) | \
-					FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS3_FTIM3		0x0
-
-#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
-	defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
-#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_A003399_NOR_WORKAROUND
-#endif
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* End of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
-						- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/
-
-/*
- * Config the L2 Cache as L2 SRAM
- */
-#if defined(CONFIG_SPL_BUILD)
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	0xD0001000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(128 << 10)
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	0xD0001000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
-#else
-#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE		(256 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x3000)
-#define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
-#endif
-#endif
-#endif
-
-/* Serial Port */
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
-#endif
-#define I2C_PCA9557_ADDR1		0x18
-#define I2C_PCA9557_ADDR2		0x19
-#define I2C_PCA9557_BUS_NUM		0
-#define CONFIG_SYS_I2C_FSL
-
-/* I2C EEPROM */
-#if defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_ID_EEPROM
-#ifdef CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-#define MAX_NUM_PORTS			9 /* for 128Bytes EEPROM */
-#endif
-/* enable read and write access to EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-
-/* RTC */
-#define CONFIG_RTC_PT7C4338
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-
-/*
- * SPI interface will not be available in case of NAND boot SPI CS0 will be
- * used for SLIC
- */
-#if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)
-/* eSPI - Enhanced SPI */
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define TSEC1_PHY_ADDR		1
-#define TSEC2_PHY_ADDR		0
-#define TSEC3_PHY_ADDR		2
-
-#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
-		TBICR_PHY_RESET \
-		| TBICR_ANEG_ENABLE \
-		| TBICR_FULL_DUPLEX \
-		| TBICR_SPEED1_SET \
-		)
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif /* #ifdef CONFIG_FSL_SATA  */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-#define CONFIG_HAS_FSL_DR_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-/*
- * Environment
- */
-#if defined(CONFIG_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define SPL_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
-#else
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_ENV_RANGE	(32 * CONFIG_ENV_SIZE) /* new block size 512K */
-#endif
-#endif
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
-		 || defined(CONFIG_FSL_SATA)
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#endif
-
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin/* U-Boot image on TFTP server */
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\
-	"netdev=eth0\0"						\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"loadaddr=1000000\0"			\
-	"consoledev=ttyS0\0"				\
-	"ramdiskaddr=2000000\0"			\
-	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
-	"fdtaddr=1e00000\0"				\
-	"fdtfile=p1010rdb.dtb\0"		\
-	"bdev=sda1\0"	\
-	"hwconfig=usb1:dr_mode=host,phy_type=utmi\0"	\
-	"othbootargs=ramdisk_size=600000\0" \
-	"usbfatboot=setenv bootargs root=/dev/ram rw "	\
-	"console=$consoledev,$baudrate $othbootargs; "	\
-	"usb start;"			\
-	"fatload usb 0:2 $loadaddr $bootfile;"		\
-	"fatload usb 0:2 $fdtaddr $fdtfile;"	\
-	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;"	\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"		\
-	"usbext2boot=setenv bootargs root=/dev/ram rw "	\
-	"console=$consoledev,$baudrate $othbootargs; "	\
-	"usb start;"			\
-	"ext2load usb 0:4 $loadaddr $bootfile;"		\
-	"ext2load usb 0:4 $fdtaddr $fdtfile;"	\
-	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\
-	CONFIG_BOOTMODE
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_BOOTMODE \
-	"boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
-	"mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
-	"boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
-	"mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
-	"boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
-	"mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
-
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_BOOTMODE \
-	"boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
-	"i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
-	"boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
-	"i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
-	"boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
-	"i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
-	"boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
-	"i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
-	"boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
-	"i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
-#endif
-
-#define CONFIG_RAMBOOTCOMMAND		\
-	"setenv bootargs root=/dev/ram rw "	\
-	"console=$consoledev,$baudrate $othbootargs; "	\
-	"tftp $ramdiskaddr $ramdiskfile;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
