From patchwork Sat May 30 20:44:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 246877 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Sat, 30 May 2020 22:44:46 +0200 Subject: [PATCH 2/2] ARM: dts: imx: m53menlo: Convert to DM_ETH In-Reply-To: <20200530204446.273323-1-marex@denx.de> References: <20200530204446.273323-1-marex@denx.de> Message-ID: <20200530204446.273323-2-marex@denx.de> Convert the board to DM_ETH instead of legacy networking. This requires a minor addition to the DT to satisfy the requirement for specifying a PHY node. No functional change from board user perspective. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP i.MX U-Boot Team Cc: Peng Fan Cc: Stefano Babic --- arch/arm/dts/imx53-m53menlo.dts | 11 +++++++++++ configs/m53menlo_defconfig | 3 +++ 2 files changed, 14 insertions(+) diff --git a/arch/arm/dts/imx53-m53menlo.dts b/arch/arm/dts/imx53-m53menlo.dts index a6805eca9d..3767dcaef4 100644 --- a/arch/arm/dts/imx53-m53menlo.dts +++ b/arch/arm/dts/imx53-m53menlo.dts @@ -86,8 +86,19 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; + phy-handle = <ðphy0>; phy-mode = "rmii"; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy at 0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; }; &i2c1 { diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index a65c21a139..5289899601 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -75,6 +75,9 @@ CONFIG_NAND_MXC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX5=y CONFIG_DM_REGULATOR=y