From patchwork Fri Jun 5 08:55:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 241786 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Fri, 5 Jun 2020 16:55:09 +0800 Subject: [PATCHv2 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware In-Reply-To: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> References: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200605085517.13046-6-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang Add the environment 'vscfw_addr' to assign a default address for vsc7385 firmware uploading. Signed-off-by: Hou Zhiqiang --- V2: - Rebase the patch, no change intended. include/configs/p1_p2_rdb_pc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index d59fd033bd..c1c2adcd5e 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -461,6 +461,7 @@ /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET +#define __VSCFW_ADDR "vscfw_addr=ef000000" #define CONFIG_SYS_VSC7385_BASE 0xffb00000 #ifdef CONFIG_PHYS_64BIT @@ -820,6 +821,7 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset "ramdisk_size=120000\0" \ "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ +__stringify(__VSCFW_ADDR)"\0" \ __stringify(__NOR_RST_CMD)"\0" \ __stringify(__SPI_RST_CMD)"\0" \ __stringify(__SD_RST_CMD)"\0" \