From patchwork Fri Jun 5 08:55:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 241783 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Fri, 5 Jun 2020 16:55:10 +0800 Subject: [PATCHv2 06/13] dts: powerpc: p1020rdb: Add eTSEC DT nodes In-Reply-To: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> References: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200605085517.13046-7-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang P1020RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII PHY VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 Signed-off-by: Hou Zhiqiang --- V2: - Rebase the patch, no change intended. arch/powerpc/dts/p1020-post.dtsi | 16 +++++++ arch/powerpc/dts/p1020rdb-pc.dts | 1 + arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++++++++++ arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + arch/powerpc/dts/p1020rdb-pd.dts | 57 +++++++++++++++++++++++++ arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++++++ arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++++++ arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++++++ arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++++ arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++++ arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++++ 11 files changed, 283 insertions(+) create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi diff --git a/arch/powerpc/dts/p1020-post.dtsi b/arch/powerpc/dts/p1020-post.dtsi index 1dce8e86e9..2c0aa7a5c3 100644 --- a/arch/powerpc/dts/p1020-post.dtsi +++ b/arch/powerpc/dts/p1020-post.dtsi @@ -46,8 +46,24 @@ /include/ "pq3-i2c-0.dtsi" /include/ "pq3-i2c-1.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet at b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet at b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet at b2000 { + }; }; +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" + /* PCIe controller base address 0x9000 */ &pci1 { compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq"; diff --git a/arch/powerpc/dts/p1020rdb-pc.dts b/arch/powerpc/dts/p1020rdb-pc.dts index 7ebaa619df..715330dc50 100644 --- a/arch/powerpc/dts/p1020rdb-pc.dts +++ b/arch/powerpc/dts/p1020rdb-pc.dts @@ -32,4 +32,5 @@ }; }; +/include/ "p1020rdb-pc.dtsi" /include/ "p1020-post.dtsi" diff --git a/arch/powerpc/dts/p1020rdb-pc.dtsi b/arch/powerpc/dts/p1020rdb-pc.dtsi new file mode 100644 index 0000000000..6bf424fd3f --- /dev/null +++ b/arch/powerpc/dts/p1020rdb-pc.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +&soc { + mdio at 24000 { + phy0: ethernet-phy at 0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy at 1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy at 11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio at 25000 { + tbi1: tbi-phy at 11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet at b0000 { + phy-connection-type = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + + }; + + enet1: ethernet at b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet at b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/dts/p1020rdb-pc_36b.dts b/arch/powerpc/dts/p1020rdb-pc_36b.dts index c0e5ef4cf4..7680b7c7e1 100644 --- a/arch/powerpc/dts/p1020rdb-pc_36b.dts +++ b/arch/powerpc/dts/p1020rdb-pc_36b.dts @@ -32,4 +32,5 @@ }; }; +/include/ "p1020rdb-pc.dtsi" /include/ "p1020-post.dtsi" diff --git a/arch/powerpc/dts/p1020rdb-pd.dts b/arch/powerpc/dts/p1020rdb-pd.dts index 21174a09be..7868c9b95c 100644 --- a/arch/powerpc/dts/p1020rdb-pd.dts +++ b/arch/powerpc/dts/p1020rdb-pd.dts @@ -17,6 +17,63 @@ soc: soc at ffe00000 { ranges = <0x0 0x0 0xffe00000 0x100000>; + + mdio at 24000 { + phy0: ethernet-phy at 0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy at 1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio at 25000 { + tbi1: tbi-phy at 11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio at 26000 { + tbi2: tbi-phy at 11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock at b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet at b0000 { + phy-connection-type = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + enet1: ethernet at b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet at b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; }; pci1: pcie at ffe09000 { diff --git a/arch/powerpc/dts/pq3-etsec2-0.dtsi b/arch/powerpc/dts/pq3-etsec2-0.dtsi new file mode 100644 index 0000000000..f9d3d04650 --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-0.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +mdio at 24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; +}; + +ethernet at b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + reg = <0xb0000 0x1000>; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group at b0000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; + }; +}; diff --git a/arch/powerpc/dts/pq3-etsec2-1.dtsi b/arch/powerpc/dts/pq3-etsec2-1.dtsi new file mode 100644 index 0000000000..6c01481909 --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-1.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +mdio at 25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; +}; + +ethernet at b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + reg = <0xb1000 0x1000>; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group at b1000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; + }; +}; diff --git a/arch/powerpc/dts/pq3-etsec2-2.dtsi b/arch/powerpc/dts/pq3-etsec2-2.dtsi new file mode 100644 index 0000000000..2a597c0db6 --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-2.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +mdio at 26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; +}; + +ethernet at b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + reg = <0xb2000 0x1000>; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group at b2000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; + }; +}; diff --git a/arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi new file mode 100644 index 0000000000..16752a7c45 --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +&enet0_grp2 { + queue-group at b4000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; + }; +}; diff --git a/arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi new file mode 100644 index 0000000000..0464938424 --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +&enet1_grp2 { + queue-group at b5000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; + }; +}; diff --git a/arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi new file mode 100644 index 0000000000..fe8003c44a --- /dev/null +++ b/arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2020 NXP + */ + +&enet2_grp2 { + queue-group at b6000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>; + }; +};